journal article·2025-01Open access

PMMA-Au@YAG:Ce phosphor deposited on flexible substrate for white light emitting devices

Vasilica Ţucureanu, Cosmin Romanițan, Iuliana Mihalache, Alina Matei

Abstract

• YAG:Ce particles were obtained by the modified solid-state method; • Gold nanoparticles were anchored to the surface of the phosphor; • Au@YAG:Ce modified phosphor was embedded in PMMA; • PMMA-Au@YAG:Ce was deposited on a flexible substrate and over blue chips; • The device exhibits a cold white light emission suitable for outdoor applications. This paper investigates the possibility to obtain yttrium aluminum garnet doped with cerium ions (YAG:Ce) phosphor, improve the emissive properties by modification with metal nanoparticles, followed by embedding into the polymer matrix, and deposition of nanocomposite on a flexible substrate to produce the white light by excitation with a blue chip. YAG:Ce yellow phosphor was obtained by a modified solid-state process, followed by in-situ anchoring of gold nanoparticles (Au@YAG). To deposit the phosphor on the flexible substrate, the Au@YAG nanocomposite was embedded in a poly(methyl methacrylate) (PMMA) matrix using the ex-situ method. The quality of the phosphor particles and composites was studied using FTIR spectroscopy, X-ray diffraction, and fluorescence spectroscopy. The applicability of the developed materials and the efficiency of methods were confirmed by the photometric studies performed on the composite film to determine the chromaticity coordinates, leading to the parameters of the semiconductor device that generates cold white light.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Sol–gel matrix for YAG: Ce phosphors in pc-LEDs10.1007/s10971-020-05457-y ↗
2. Inorganic phosphor materials for lighting10.1007/s41061-016-0023-5 ↗
3. New paradigm of multi-chip white LEDs: combination of an InGaN blue LED and full down-converted phosphor-converted LEDs10.1364/OE.19.00A270 ↗
4. Surface texture induced light extraction of novel Ce:YAG ceramic tubes for outdoor lighting10.1007/s10853-018-2874-3 ↗
5. „Development of three-layered composite color converters for white LEDs based on the epitaxial structures of YAG:Ce, TbAG
6. L. Xueye, “Research Progress in the Preparation of Phosphor for White Light Emitting Diode”, MATEC Web of Conf. 358 (2022) 01057 MSMS 2022, https://doi.org/10.1051/matecconf/202235801057.10.1051/matecconf/202235801057 ↗
7. “Structural properties of yttrium aluminum garnet10.3390/cryst12081132 ↗
8. Strong photoluminescence emission at low dopant amount in YAG:Ce and YAG:Eu phosphors10.1016/j.materresbull.2018.01.005 ↗
9. Thulium–yttrium–aluminium–garnet (Tm:YAG) laser treatment of penile cancer: oncological results, functional outcomes, and quality of life10.1007/s00345-017-2144-z ↗
10. The broad emission at 785 nm in YAG:Ce3+, Cr3+ phosphor10.1016/j.saa.2017.09.011 ↗
11. Monodispersed spherical YAG:Ce3+ phosphor particles by one-pot synthesis10.1016/j.jallcom.2016.09.129 ↗
12. Structural and luminescence properties of yellow phosphors prepared by a modified sol–gel method10.1557/mrc.2017.84 ↗
13. Preparation, photoluminescence, and photostability of transparent composite films of glycothermally synthesized YAG:Ce3+ nanoparticles for White LED
14. Impact of molar ratio of total metal ions to precipitant on YAG:Ce nanophosphors synthesized by reverse titration coprecipitation10.1016/j.ceramint.2017.04.004 ↗
15. Effect of process parameters on YAG:Ce phosphor properties obtained by co-precipitation method10.1016/j.ceramint.2020.06.156 ↗
16. Rare-earth-doped Y3Al5O12 (YAG) nanophosphors: synthesis, surface functionalization, and applications in thermoluminescence dosimetry and nanomedicine10.1088/1361-6463/aaca49 ↗
17. Properties of Ce3+-doped Y3Al5O12 phosphor nanoparticles formed by laser ablation in liquid10.1149/2.0031806jss ↗
18. Deep submicrometer YAG:Ce phosphor particles with high photoluminescent quantum yield prepared by flame spray synthesis
19. Garnet-type nanophosphors for white LED lighting10.3389/fmats.2020.00210 ↗
20. Modified solid-state process for yellow yttrium aluminum garnet synthesis10.1063/1.5090062 ↗
21. Synthesis of Y3Al5O12:Ce3+ phosphor in the Y2O3 - Al - CeO2 ternary system10.1007/s10853-017-1427-5 ↗
22. Combustion synthesis of YAG:Ce phosphors via the thermite reaction of aluminum10.1016/j.jre.2017.06.014 ↗
23. The effect of BaF2 concentration and particle size distribution on the luminescence efficiency of YAG:Ce3+ phosphors10.1088/2053-1591/aad609 ↗
24. Structural, optical and thermal properties of the Ce doped YAG synthesized by solid state reaction method10.1016/j.tca.2017.04.010 ↗
25. Improvement the luminescent property of Y3Al5O12:Ce3+ by adding the different fluxing agents for white LEDs10.1016/j.ijleo.2018.10.169 ↗
26. Improving the emissive properties of yttrium-based phosphor through internal and external modifications10.1007/s10853-023-08488-2 ↗
27. Fine tuning of emission property of white light-emitting diodes by quantum-dot-coating on YAG: Ce nanophosphors10.1016/j.apsusc.2016.04.116 ↗
28. Enhanced optical properties of YAG:Ce yellow phosphor by modification with gold nanoparticles10.1016/j.ceramint.2019.01.061 ↗
29. Synthesis and luminescent properties of Eu3+, Eu3+/Bi3+ and Gd3+ codoped YAG:Ce3+ phosphors and their potential applications in warm white light-emitting diodes10.1016/j.cplett.2017.07.042 ↗
30. Optical performances of YAG:Re3+ (Re=Ce, Eu) phosphor films with co-doping Tb3+ as energy-transfer sensitizer10.1111/jace.14098 ↗
31. Temperature-dependent fluorescence decay lifetimes of the phosphor Y3(Al0.5Ga0.5)5O12:Ce1%10.1063/1.3077262 ↗
32. Luminescence properties of Ln3+ -doped (Ce3+, Eu3+, Tb3+ or Er3+) mixede metals Y3(Al, In)5O12 and Y3Al4.75Cr0.25O12 garnets synthesized by sol-gel method10.1016/j.matchemphys.2015.12.043 ↗
33. “The effect of oxygen pressure on the structural and photoluminescence properties of pulsed laser deposited (Y-Gd)3Al5O12: Ce3+ thin films”
34. Photoluminescence properties of YAG:Ce3+, Pr3+ nano-sized phosphors synthesized by a modified co-precipitation method10.1016/S1002-0721(17)60917-7 ↗
35. Stable and chromaticity-tunable phosphor-in-glass inorganic color converter for high-power warm white light-emitting diode10.1016/j.jeurceramsoc.2016.01.019 ↗
36. (Sr, Ca)AlSiN3:Eu2+ phosphor-in-glass and YAG ceramic composites for high CRI and high-power white LEDs10.1016/j.ceramint.2023.04.230 ↗
37. Hybrid YAG/CdSe quantum dots phosphors for white light-emitting diodes10.1166/jnn.2013.7209 ↗
38. Enable low-amount YAG:Ce3+ to convert into white light with plasmonic Au nanoparticles10.1039/C5NR01038A ↗
39. Enhancement of thermal quenching properties of a yellow-emitting SiO2-coated Y3Al5O12:Ce3+ phosphor for white light-emitting diode applications10.1088/0031-8949/2013/T157/014012 ↗
40. Synthesis of YAG:Ce/TiO2 nanocomposite films10.1016/j.optmat.2010.07.022 ↗
41. Towards multi-functional SiO2-YAG:Ce core-shell optical nanoparticles for solid state lighting applications10.3390/nano10010153 ↗
42. Nanostructuration of YAG:Ce coatings by ZnO nanowires: a smartway to enhance light extraction efficiency10.3390/nano12152568 ↗
43. Bulk polycrystalline ceria–doped Al2O3 and YAG ceramics for high-power density laser-driven solid-state white lighting: effects of crystallinity and extreme temperatures10.1557/jmr.2019.417 ↗
44. Superhigh-luminance Ce:YAG phosphor in glass and phosphor-in-glass film for laser lighting10.1021/acssuschemeng.2c02657 ↗
45. Development of Ce:YAG glass-ceramics phosphor for white LED application
46. Flexible fabrication of a patterned red phosphor layer on a YAG:Ce3+ phosphor-in-glass for high-power WLEDs10.1364/OME.8.000605 ↗
47. Improving optical performance of multi-chip white LEDs by bi-layers remote-packaging phosphors
48. The effect of the polymeric matrix on the emissive properties of yttrium-based phosphors10.1016/j.jallcom.2020.156136 ↗
49. Multilayer design of hybrid phosphor film for application in LEDs10.1016/j.optmat.2016.08.023 ↗
50. Preparation and characterisation of Ce:YAG-polycarbonate composites for white LED10.1016/j.jallcom.2016.01.009 ↗
51. „Influence of the Ce:YAG amount on structure and optical properties of Ce:YAG-PMMA composites for white LED”10.1515/zpch-2015-0703 ↗
52. M. L. Saladino, A. Zanotto, D. C. Martino, A. Spinella, G. Nasillo, E. Caponetti „Ce:YAG Nanoparticles Embedded in a PMMA Matrix: Preparation and Characterization” Langmuir, 26(16) (2010) , 13442–13449, https://doi.org/10.1021/la9042809.10.1021/la9042809 ↗
53. “Photoluminescence behaviour of cerium activated yttrium aluminium garnet intercalated PMMA composite thin films”10.1007/s10854-017-7441-1 ↗
54. Piezoelectric materials for flexible and wearable electronics: a review10.1016/j.matdes.2021.110164 ↗
55. In situ growth of boron doped g-C3N4 on carbon fiber cloth as a recycled flexible film-photocatalyst10.1016/j.ceramint.2020.08.246 ↗
56. “Selective transfer of light-emitting diodes onto a flexible substrate via laser lissajous scanning”10.1021/acsomega.0c01425 ↗
57. “Flexible lead-free BiFeO3/PDMS-based nanogenerator as piezoelectric energy harvester”10.1021/acsami.6b04497 ↗
58. Towards high areal capacitance, rate capability, and tailorable supercapacitors: Co3O4@polypyrrole core–shell nanorod bundle array electrodes10.1039/C8TA07477A ↗
59. Dosimeter based on YAG: Ce phosphor via sol-gel method for online X-ray radiation monitoring10.3390/cryst11121567 ↗
60. Synthesis and characterization of YAG:Ce phosphors for white LEDs
61. Nanodefects in YAG:Ce-based phosphor microcrystals10.3390/cryst9090476 ↗
62. Synthesis and characterization of PMMA-cellulose nanocomposites by in situ polymerization technique10.1002/app.36723 ↗
63. Synthesis and characterization of YAG:Ce,Gd and YAG:Ce,Gd/PMMA nanocomposites for optoelectronic applications10.1007/s10853-014-8751-9 ↗
64. Spectroscopic techniques for the characterization of the YAG:Ce,Gd phosphors and PDMS-YAG:Ce,Gd composites
65. Enhanced light extraction of single-surface textured YAG:Ce transparent ceramics for high power white LEDs10.1016/j.apsusc.2018.05.133 ↗
66. Gd codoped YAG nanopowder for white light emitting device10.1166/jnn.2012.6829 ↗
67. “Effect of PMMA impregnation on the fuorescence quantum yield of sol-gel glasses doped with quinine sulfate”10.1016/S0925-3467(01)00060-X ↗