Influence of process parameters on microstructure and mechanical properties in 6156 aluminum alloy friction stir side additive manufacturing
Source abstract
Abstract
Abstract Friction stir additive manufacturing is a metal additive manufacturing (MAM) technology based on solid-state joining developed from friction stir welding. In this article, a friction-stir side additive manufacturing (FSSAM) process based on a modified common milling machine is proposed as an alternative to existing strip-feed MAM. MAM of 6156 aluminum alloy was performed using the FSSAM process on an aluminum alloy plate substrate. Following initial macroscopic examination and scanning electron microscope analysis of tensile specimen fractures, hardness distribution and tensile properties were evaluated. Finally, theoretical modeling of heat input during the additive manufacturing process was developed. For specimens fabricated via FSSAM under process parameters of 750 rpm tool rotational speed and 37.5 mm/min traverse speed, the tensile strength reached 273.62 MPa. Hardness testing revealed that rotational speed and traverse speed significantly influence hardness curve stability. The most stable hardness profile (averaging 70 HV0.2) was achieved at 50 rpm and 37.5 mm/min. The results indicate that the specimen exhibits optimal mechanical properties when the FSSAM tool is operated at a plunge depth of 2.60 mm, a rotational speed of 950 rpm, and a traverse speed of 37.5 mm/min.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electrical Engineering, Northeast Forestry University , Harbin , 150040 , China
References (23)
Show source-provided references
1. Srivastava, M., Rathee, S., Maheshwari, S., A review on recent progress in solid state friction based metal additive manufacturing: friction stir additive techniques, Crit. Rev. Solid. State Mater. Sci., 2019, 44(5): 345–377. 10.1080/10408436.2018.149025010.1080/10408436.2018.1490250 ↗
2. Janeczek, A., Tomków, J., Derazkola, H.A., Łyczkowska, K., Fydrych, D., Effect of underwater friction stir welding parameters on AA5754 alloy joints: experimental studies, Int. J. Adv. Manuf. Technol., 2024, 134: 5643–5655. 10.1007/s00170-024-14485-910.1007/s00170-024-14485-9 ↗
3. Chen, H., Meng, X., Chen, J., Wire-based friction stir additive manufacturing toward field repairing, Weld. J., 2022, 101(9): 249S–252S. 10.29391/2022.101.01910.29391/2022.101.019 ↗
4. Fatoba, O.S., The impact of residual stresses and porosity on the performance of laser metal additive manufactured (MAM) components: a review, 2024 15th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), IEEE, 2024, pp. 191–197. 10.1109/ICMIMT61937.2024.1058581010.1109/ICMIMT61937.2024.10585810 ↗
5. Pixner, F., Warchomicka, F., Peter, P., Wire-based additive manufacturing of Ti-6Al-4V using electron beam technique, Materials, 2020, 13(15): 3310. 10.3390/ma1315331010.3390/ma13153310 ↗
6. Srivastava, M., Rathee, S., Tiwari, A., Wire arc additive manufacturing of metals: A review on processes, materials and their behaviour, Mater. Chem. Phys., 2023, 294: 126988. 10.1016/j.matchemphys.2022.12698810.1016/j.matchemphys.2022.126988 ↗
7. Pattanayak, S., Sahoo, S., Gas metal arc welding based additive manufacturing-a review, CIRP J. Manuf. Sci. Technol., 2021, 33: 398–442. 10.1016/j.cirpj.2021.04.01010.1016/j.cirpj.2021.04.010 ↗
8. Zhou, X., Zhang, H., Wang, G., Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing, Int. J. Heat. Mass. Transf., 2016, 103: 521–537. 10.1016/j.ijheatmasstransfer.2016.06.08410.1016/j.ijheatmasstransfer.2016.06.084 ↗
9. Calvert, J., Microstructure and mechanical properties of WE43 alloy produced via additive friction stir technology, Virginia Tech University, Virginia, 2015.
10. Dilip, J., Ram, G., Microstructure evolution in aluminum alloy AA 2014 during multi-layer friction deposition, Mater. Charact., 2013, 86: 146–151. 10.1016/j.matchar.2013.10.00910.1016/j.matchar.2013.10.009 ↗
11. Dilip, J., Rafi, H., Ram, G., A new additive manufacturing process based on friction deposition, Trans. Indian. Inst. Met., 2011, 64(1–2): 27–30. 10.1007/s12666-011-0005-910.1007/s12666-011-0005-9 ↗
12. Akpınar, D., Dilibal, S., Gürol, U., Experimental investigation on WAAM-based functional hard-facing bimetallic part, J. Min. Metall., Sect. B: Metallurgy, 2024, 60(2): 283–293. 10.2298/JMMB240505020A10.2298/JMMB240505020A ↗
13. Xinkai, W., Li, X., Weiping, X., Influence of process parameters on formation stir additive manufacturing on aluminum alloy, J. Mater. Eng., 2015, 43(5): 8–12. 0.11868/j.issn.1001-4381.2015.05.002
14. Xiao, D., Qing, D., The utility model relates to a semi-solid additive manufacturing device: China, CN208359482U, 2019.
15. Chaowei, S., Hai, Z., Huaxia, Z., Influence of process parameters on additive manufacturing of aluminum alloys by friction stir side additive manufacturing on the forming of additive zones, J. Plasticity Eng., 2021, 28(4): 122–127. 10.3969/j.issn.1007-2012.2022.02.020
16. Schmidt, H., Hattel, J., Wert, J., An analytical model for the heat generation in friction stir welding. Model. Simul. Mater. Sci. Eng., 2004, 12(1): 143–157. 10.1088/0965-0393/12/1/01310.1088/0965-0393/12/1/013 ↗
17. Colligan, K., Mishra, R., A conceptual model for the process variables related to heat generation in friction stir welding of aluminum, Scr. Materialia, 2008, 58(5): 327–331. 10.1016/j.scriptamat.2007.10.01510.1016/j.scriptamat.2007.10.015 ↗
18. Bin, H., Chunping, H., Haijun, Z., Influence of amount of overlap in friction stir additive manufacturing of LY12 aluminum alloy, J. Nanchang Hangkong Univ. (Nat. Sci.), 2014, 28(3): 78–82. 10.3969/j.issn.1001-4926.2014.03.013
19. Palanivel, S., Sidhar, H., Mishra, R., Friction stir additive manufacturing: Route to high structural performance, JOM, 2015, 67(3): 616–621. 10.1007/s11837-014-1271-x10.1007/s11837-014-1271-x ↗
20. Zhu, H., Zeng, T., Li, Y., Dong, Q., Liu, Y., Yan, X., Revealing the microstructural evolution and organizational characteristics of aluminum alloy rolling friction deposition additions, J. Mech. Sci. Technol., 2025, 39: 2615–2626. 10.1007/s12206-025-0421-010.1007/s12206-025-0421-0 ↗
21. Jamaludeen, U.M., Examination and optimization of friction stir welding process parameters of AA6092 alloys, Soldag. Inspeção, 2024, 29: e2907. 10.1590/0104-9224/SI29.0710.1590/0104-9224/si29.07 ↗
22. Patil, N.A., Pedapati, S.R., Kakkeri, S., Pedapati, S., Characterization of EN-AW-6061-O–graphite nanoflake composites for enhanced mechanical properties using multi-pass friction stir processing, Adv. Mater. Sci., 2025, 25(3): 5–17. 10.2478/adms-2025-001210.2478/adms-2025-0012 ↗
23. Liu, H., Shang, D.G., Liu, J.Z., Guo, Z.K., Fatigue life prediction of laser welded 6156 Al-alloy joints based on crack closure, Theor. Appl. Fract. Mech., 2014, 74: 181–187. 10.1016/j.tafmec.2014.10.00110.1016/j.tafmec.2014.10.001 ↗