Construction of various nanostructures on carbon nanotube films
Source abstract
Abstract
Abstract Construction of nanostructures on surfaces has appealed intensive attention due to its significant applications in diverse fields. Especially, engineering surface properties via surficial nanostructures is actually the creation of functional interface-based materials and slated to be the key aspect for the future of materials science. Although many efforts have been made, there are only a few reports about the construction of nanostructures on carbon nanotube film surfaces. The big challenge for constructing on carbon films is that these carbon assemblies are easy to be dispersed by immersion in a chemical solution. Here, in this paper, we have shown for the first time the fabrication of different kinds of nanostructures, i.e. nanoneedles, nanoparticles, nanospirals, on carbon nanotube films by using facile and cheap electrodeposition method and precise physical deposition method. We pretreat the films by an electrical method to strengthen the films to avoid dispersion during the electrodeposition process. These composite films are still very flexible after coating with nanostructures. Compared with those precise physical deposition methods, the facile electrodeposition method is more suitable for constructing nanostructures on carbon nanotube films, due to the low requirement for planeness of films. It is interesting to find that these nanostructures can endow superhydrophobicity or higher conductivity for these flexible composite films, which greatly broaden the potential applications for carbon nanotube films in the fields of battery, moisture self-cleaning, electrostatic energy harvesting, and enhancing condensation heat transfer for more efficiency of energy utilization, environmental, and thermal management.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Dresselhaus · 2001
2. Understanding the mechanical and conductive properties of carbon nanotube fibers for smart electronics
3. Carbon-nanotube-based electrical conductors: fabrication, optimization, and applications10.1002/aelm.201800811 ↗
4. Direct synthesis of electrowettable carbon nanowall-diamond hybrid materials from sacrificial ceramic templates using HFCVD10.1002/admi.201700019 ↗
5. Low-crystalline iron oxide hydroxide nanoparticle anode for high-performance supercapacitors10.1038/ncomms14264 ↗
6. Water-induced formation, characterization, and photoluminescence of carbon nanotube-based composites of gadolinium(III) and platinum(II) dithiolenes10.1002/chem.201404461 ↗
7. Fluorescent microspheres of zinc 1,2-dicarbomethoxy-1,2-dithiolate complex decorated with carbon nanotubes
8. Fundamentals and scopes of doped carbon nanotubes towards energy and biosensing applications10.1016/j.mtener.2018.05.002 ↗
9. Nanospheres of copper(III) 1,2-dicarbomethoxy-1,2-dithiolate and its composite with water soluble carbon nanotubes10.1039/c3nj00368j ↗
10. P2O5 assisted green synthesis of multicolor fluorescent water soluble carbon dots10.1166/jnn.2014.8487 ↗
11. What is next for electrospinning?10.1016/j.matt.2020.01.004 ↗
12. Metal nanofibrils embedded in long free-standing carbon nanotube fibers with a high critical current density10.1038/s41427-018-0028-3 ↗
13. Designing ionic channels in novel carbons for electrochemical energy storage10.1093/nsr/nwz140 ↗
14. Advances in the science and technology of carbon nanotubes and their composites: a review10.1016/S0266-3538(01)00094-X ↗
15. Meyyappan · 2004
16. A method for coating carbon nanotubes with titanium10.1016/S1872-5805(12)60023-7 ↗
17. Self-organized ribbons of aligned carbon nanotubes10.1021/cm010738v ↗
18. Application of carbon nanotubes as supports in heterogeneous catalysis10.1021/ja00096a076 ↗
19. The decoration of carbon nanotubes by metal nanoparticles10.1088/0022-3727/29/12/037 ↗
20. Formation of metal nanowires on suspended single-walled carbon nanotubes10.1063/1.1324731 ↗
21. Composite yarns of multiwalled carbon nanotubes with metallic electrical conductivity10.1002/smll.201000493 ↗
22. Continuous electrodeposition for lightweight, highly conducting and strong carbon nanotube-copper composite fibers10.1039/c1nr10571j ↗
23. Effective reinforcement of electrical conductivity and strength of carbon nanotube fibers by silver-paste-liquid infiltration processing10.1039/c3cp44085k ↗
24. Enhancement of electrical conductivity of carbon nanotube fibers by copper sulfide plating10.1007/s12221-015-0769-3 ↗
25. Hydrophobic anchoring of monolayer-protected gold nanoclusters to carbon nanotubes10.1021/nl025824o ↗
26. Recent progress in bionic condensate microdrop self-propelling surfaces10.1002/adma.201703002 ↗
27. Direct spinning of carbon nanotube fibers from chemical vapor deposition synthesis10.1126/science.1094982 ↗
28. Strong, twist-stable carbon nanotube yarns and muscles by tension annealing at extreme temperatures10.1002/adma.201600628 ↗
29. Carbon welding by ultrafast Joule heating10.1021/acs.nanolett.6b03888 ↗
30. Bio-inspired superhydrophobic closely-packed aligned nanoneedle architecture for enhancing condensation heat transfer10.1002/adfm.201800634 ↗
31. In situ growth of densely packed single-crystal copper nanocone structure films with condensate microdrop self-removal function on copper surfaces10.1002/admi.201600362 ↗
32. Square spiral photonic crystal with visible bandgap10.1063/1.3695388 ↗
33. Clustered ribbed-nanoneedle structured copper surfaces with high-efficiency dropwise condensation heat transfer performance10.1021/acsami.5b02376 ↗
34. Design and fabrication of a tip-like ZnO nanotube array structure with condensate microdrop self-propelling function10.1002/cnma.201600207 ↗