journal article·2022-06

A study on high temperature dry sliding wear of AA7050-T4 and effects of the test temperature on microstructure, corrosion behavior, hardness and electrical conductivity

Mahmut Erol, Alptekin Kısasöz, Paşa Yaman, Sencer Süreyya Karabeyoğlu, Uğur Barut

Publisher page

Abstract

In the present work, dry sliding wear of the AA7050-T4 at elevated temperatures was studied. Also, corrosion behavior, electrical conductivity, and hardness of the worn samples were investigated. The wear tests were carried out from room temperature to 250 degrees C for naturally aged AA7050 alloy. Worn samples were characterized by differential scanning calorimetry, X-ray diffraction, optical microscope, scanning electron microscope, and 3D profilometer analysis. Moreover, corrosion resistance, electrical conductivity, and hardness were examined to reveal the effect of elevated wear temperature on the properties of the samples. Structural examinations revealed that increasing wear test temperature induces phase transformation, and MgZn2 precipitates are occurred for the samples worn at 200 degrees C and 250 degrees C. Furthermore, it was seen that electrical conductivity is improved via the formation of MgZn2 precipitates. The sample worn at room temperature showed superior corrosion resistance compared to others.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Evolution of second phases and mechanical properties of 7075 Al alloy processed by solution heat treatment10.1016/S1003-6326(17)60240-1 ↗
2. Secondary ageing in an aluminium alloy 705010.1016/j.msea.2008.02.039 ↗
3. Residual stress relief in Al-Zn-Mg-Cu alloy by a new multistage interrupted artificial aging treatment10.1016/j.matdes.2015.12.004 ↗
4. Cooling slope casting of AA7075 alloy combined with reheating and thixoforging10.1016/S1003-6326(19)65129-0 ↗
5. Properties of AA7075 aluminium alloy in aging and retrogression and reaging process, Trans10.1016/S1003-6326(17)60261-9 ↗
6. Influence of RRA treatment on the microstructure and stress corrosion cracking behavior of the spray-formed 7075 alloy10.1007/s11003-015-9851-7 ↗
7. Crystal structure and stability of complex precipitate phases in Al-Cu-Mg-(Si) and Al-Zn-Mg alloys10.1016/S1359-6454(01)00229-4 ↗
8. An investigation of the strain dependence of dynamic precipitation in an Al-Zn-Mg-Cu alloy10.1016/j.scriptamat.2017.04.031 ↗
9. Effect of quenching rate on strengthening behavior of an Al-Zn-Mg-Cu alloy during natural ageing10.1016/j.msea.2020.139900 ↗
10. Investigation of precipitation behavior and related hardening in AA 7055 aluminium alloy10.1016/j.msea.2008.09.065 ↗
11. Effect of predeformation and preaging at room temperture in Al-Zn-Mg-(Cu,Zr) alloys10.1016/S0921-5093(00)01883-9 ↗
12. Evolution of precipitate microstructures during the retrogression and re-ageing heat treatment of an Al-Zn-Mg-Cu alloy10.1016/j.actamat.2010.05.017 ↗
13. Differential scanning calorimetry and electron diffraction investigation on low-temperature aging in Al-Zn-Mg alloys10.1007/s11661-000-0269-x ↗
14. Structure analysis of embedded nano-sized particles by precession electron diffraction. η′-precipitate in an Al-Zn-Mg alloy as example10.1016/j.ultramic.2006.01.009 ↗
15. Revisiting the precipitation sequence in Al-Zn-Mg-based alloys by high-resolution transmission electron microscopy10.1016/j.scriptamat.2010.08.001 ↗
16. GP-zones in Al-Zn-Mg alloys and their role in artificial aging10.1016/S1359-6454(01)00251-8 ↗
17. Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds10.1016/j.msea.2009.11.057 ↗
18. Effect of natural aging on quench-induced inhomogeneity of microstructure and hardness in high strength 7055 aluminium alloy10.1016/j.jallcom.2014.10.195 ↗
19. Early-stage precipitation in Al-Zn-Mg-Cu alloy (7050)10.1016/j.actamat.2004.06.025 ↗
20. Investigation of precipitation in an Al-Zn-Mg alloy after two-step ageing treatment at 100° and 150°C10.1016/S0921-5093(99)00231-2 ↗
21. Microstructure evolution and deformation behavior of ultrafine-grained Al-Zn-Mg alloys with fine η′ precipitates10.1016/j.actamat.2010.08.034 ↗
22. Characterization of precipitate evolution in an artificially aged Al-Zn-Mg-Sc-Zr alloy10.1016/j.msea.2009.09.023 ↗
23. Precipitation behaviour of Al-Zn-Mg-Cu alloy and diffraction analysis from η′ precipitates in four variants10.1016/j.jallcom.2014.05.061 ↗
24. Microstructural characterization of interrupted aging on an AA7050 aluminium alloy10.1016/j.matchar.2019.04.013 ↗
25. Analysis of the microhardness, mechanical properties and electrical conductivity of 7055 aluminium alloy10.1016/j.vacuum.2019.109005 ↗
26. An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy10.1016/j.actamat.2019.05.041 ↗
27. Effect of heat treatments on the tensile strength and SCC-resistance of AA7050 in an alkaline saline solution10.1016/j.corsci.2005.11.009 ↗
28. The direct observation of copper segregation at the broad faces of η′ and η precipitates in AA7010 aluminium alloy10.1016/j.matchar.2020.110232 ↗
29. Dependences of microstructures and properties on initial tempers of creep aged 7050 aluminum alloy10.1016/j.jmatprotec.2016.07.004 ↗
30. Effects of retrogression and reaging heat treatment on the microstructure, exfoliation corrosion, electrical conductivity, and mechanical properties of AA705010.1002/maco.201910887 ↗
31. The effect of quench rate and overageing temper on the corrosion behaviour of AA705010.1016/j.corsci.2013.10.010 ↗
32. High stress abrasive wear characteristics of Al 7075 alloy and 7075/Al2O3 composite10.1016/j.measurement.2018.05.090 ↗
33. A study on sliding wear of a 7075 aluminium alloy10.1016/j.wear.2004.05.006 ↗
34. Wear behavior of 7075-aluminum after ultrasonic-assisted surface burnishing10.1016/j.jmapro.2020.01.026 ↗
35. HREM study and structure modeling of the η′ phase, the hardening precipitates in commercial Al-Zn-Mg alloys10.1016/S1359-6454(99)00138-X ↗
36. Correlation between microstructure and calorimetric behavior of aluminium alloy 7075 and AlZnMg alloys in various tempers10.1016/0921-5093(89)90859-9 ↗
37. Retrogression and re-ageing of 7075 aluminium alloy: microstructural characterization10.1016/S0924-0136(99)00219-8 ↗
38. Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy10.1016/S0921-5093(98)00615-7 ↗
39. Structures and transformations during artificial aging of an industrial 7xxx-series Al-Zn-Mg-Zr alloy10.4028/www.scientific.net/MSF.396-402.815 ↗
40. Early solute clustering in an AlZnMg alloy10.4028/www.scientific.net/MSF.445-446.16 ↗
41. High-resolution characterization of the precipitation behavior of an Al-Zn-Mg-Cu alloy10.1080/09500839.2011.652682 ↗
42. Influence of alumina and zirconia incorporations on the structure and wear resistance of titania-based MAO coatings10.1016/j.surfcoat.2019.124900 ↗
43. Correlation of strength with hardness and electrical conductivity for aluminium Alloy 701010.4028/www.scientific.net/MSF.519-521.853 ↗
44. Effects of ageing time on the mechanical and conductivity properties for various round bar diameters of AA 2219 Al alloy
45. Relationship between electrical conductivity and the stage of the heat treatments of aging and overaging of the aluminum alloy AA202410.4028/www.scientific.net/MSF.930.400 ↗