Simultaneous Enhancement of Density of States and Phonon Scattering for Excellent Performance of Cu2SnSe3
Source abstract
Abstract
As an environmentally friendly thermoelectric material, Cu 2 SnSe 3 has drawn much attention. However, the thermoelectric conversion efficiency of Cu 2 SnSe 3 is still too low to satisfy wide applications due to the high electrical resistivity ρ and low thermopower S . Herein, we show that around a 7-fold drop of electrical resistivity and 2.5-fold increase in thermopower (at room temperature) were simultaneously achieved by doping Co at Sn sites due to the increased hole concentration and enhanced density of states (DOS), enabling a dramatic power factor boost. Consequently, PF = 8.7 μW cm –1 K –2 was achieved at 848 K for Cu 2 Sn 0.92 Co 0.08 Se 3 . Moreover, both the substitution of Cu with Yb and the formation of Cu vacancies caused by Yb doping can lead to further enhancement of DOS, which gives a 1.5 times increase in S . In addition, as large as a 31% reduction (at 300 K) of lattice thermal conductivity was obtained because of the enhanced phonon scattering by point defects (Co Sn –, Yb Cu 2+, and V Cu – ) and Yb 2 Se 2 O nanoprecipitates. As a result, a high ZT = 1.23 was achieved at 848 K for the Cu 1.94 Yb 0.06 Sn 0.92 Co 0.08 Se 3 sample, which is about 2.5 times larger than that of the pristine sample.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Heusler alloys: electronic and magnetic properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Physics and New Energy
Xuzhou University of Technology
Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China
Funding
Natural Science Foundation of Fujian Province · Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China
References (33)
Show source-provided references
1. 10.1126/science.115972510.1126/science.1159725 ↗
2. 10.1126/science.aad374910.1126/science.aad3749 ↗
3. 10.1016/j.jmat.2020.08.00110.1016/j.jmat.2020.08.001 ↗
4. 10.1021/acsami.1c0349310.1021/acsami.1c03493 ↗
5. 10.1093/nsr/nwy09710.1093/nsr/nwy097 ↗
6. 10.1093/nsr/nwz04010.1093/nsr/nwz040 ↗
7. 10.1021/jacs.8b1262410.1021/jacs.8b12624 ↗
8. 10.1016/j.joule.2020.07.02110.1016/j.joule.2020.07.021 ↗
9. 10.1021/acsnano.8b0857910.1021/acsnano.8b08579 ↗
10. 10.1039/D0EE01004A10.1039/D0EE01004A ↗
11. 10.1038/nature0999610.1038/nature09996 ↗
12. 10.1002/aenm.20180324210.1002/aenm.201803242 ↗
13. 10.1021/jacs.6b0701010.1021/jacs.6b07010 ↗
14. 10.1038/ncomms1382810.1038/ncomms13828 ↗
15. 10.1021/acsnano.6b0115610.1021/acsnano.6b01156 ↗
16. 10.1016/j.nanoen.2020.10551210.1016/j.nanoen.2020.105512 ↗
17. 10.1021/acsami.0c1354210.1021/acsami.0c13542 ↗
18. 10.1002/adfm.20160148610.1002/adfm.201601486 ↗
19. 10.1021/cm101589c10.1021/cm101589c ↗
20. 10.1007/s00339-017-1540-y10.1007/s00339-017-1540-y ↗
21. 10.1016/j.matchemphys.2014.06.05410.1016/j.matchemphys.2014.06.054 ↗
22. 10.1007/s11664-011-1873-910.1007/s11664-011-1873-9 ↗
23. 10.1021/acsami.0c0429810.1021/acsami.0c04298 ↗
24. 10.1016/j.scriptamat.2018.09.01010.1016/j.scriptamat.2018.09.010 ↗
25. 10.1021/acsami.9b0134810.1021/acsami.9b01348 ↗
26. 10.1039/D0NR08045D10.1039/D0NR08045D ↗
27. 10.1080/21870764.2018.143960910.1080/21870764.2018.1439609 ↗
28. 10.1103/PhysRev.113.104610.1103/PhysRev.113.1046 ↗
29. 10.1021/acsaem.0c0282010.1021/acsaem.0c02820 ↗
30. 10.1002/adma.20200153710.1002/adma.202001537 ↗
31. 10.1021/acsami.9b2010310.1021/acsami.9b20103 ↗
32. 10.1103/PhysRevB.86.15520110.1103/PhysRevB.86.155201 ↗
33. 10.1021/jacs.9b1327210.1021/jacs.9b13272 ↗