A new strategy to prepare alumina-zirconia composite or multilayered coatings by combining cold-spray deposition and plasma electrolytic oxidation
Source abstract
Abstract
In the present study, the feasibility of the elaboration of alumina (Al2O3) - zirconia (ZrO2) composite coatings on steel was explored by combining cold-spray deposition and plasma electrolytic oxidation (PEO). More specifically, two different configurations were investigated. The first configuration consisted in successively cold-spraying an aluminium layer first and a zirconium layer second, giving rise to a Zr / Al metallic multilayer coating that was then partially oxidized by PEO. In this configuration, microstructural characterizations evidenced the formation of a ZrO2 / Zr / Al composite multilayer coating on steel. The second configuration consisted in simultaneously cold-spraying aluminium and zirconium into a (Zr, Al) metallic composite monolayer prior to its partial oxidation by PEO. In this case, results evidenced the formation of a (ZrO2, Al2O3) / (Zr, Al) composite multilayer coating on steel. Finally, the present study demonstrated that the duplex surface treatment combining cold-spray deposition and PEO method is viable as a new route to produce ceramic/metal composite coatings on various metallic alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (95)
Show source-provided references
1. Carbon steel corrosion: a review of key surface properties and characterization methods10.1039/C6RA25094G ↗
2. Recent advances in steel surface treatment via novel/green conversion coatings for anti-corrosion applications: a review study10.1007/s11998-021-00466-0 ↗
3. An overview on plasma assisted thermochemical treatments of martensitic stainless steels10.1088/2051-672X/acb372 ↗
4. Sol-gel coatings on metals for corrosion protection10.1016/j.porgcoat.2008.08.010 ↗
5. Advanced applications of amorphous alumina: from nano to bulk10.1016/j.jnoncrysol.2019.119493 ↗
6. A review on metallurgical features of hot-dip aluminized steel10.1088/2631-8695/acb902 ↗
7. Al2O3/ZrO2 nanolaminates as ultrahigh gas-diffusion barriers – a strategy for reliable encapsulation of organic electronics10.1002/adma.200803440 ↗
8. Permeation barrier properties of an Al2O3/ZrO2 multilayer deposited by remote plasma atomic layer deposition10.1016/j.cap.2013.11.053 ↗
9. In-situ oxidation of aluminized stainless-steel to form alumina as tritium permeation barrier coating10.1016/j.fusengdes.2020.112154 ↗
10. Plasma electrolytic oxidation coatings with particle additions – a review10.1016/j.surfcoat.2016.08.055 ↗
11. Incorporation of MoO2 and ZrO2 particles into the oxide film formed on 7075 Al alloy via micro-arc oxidation10.1016/j.matlet.2016.07.009 ↗
12. Electrochemical response of MoO2-Al2O3 oxide films via plasma electrolytic oxidation10.1016/j.surfcoat.2017.05.051 ↗
13. Electrochemical response of Al2O3-MoO2-TiO2 oxide films formed on 6061 Al alloy by plasma electrolytic oxidation10.1149/2.0931609jes ↗
14. Fabrication of functionalized coating with a unique flowery-flake structure for an effective corrosion performance and catalytic degradation10.1016/j.cej.2021.129737 ↗
15. Recent progress in surface modification of metals coated by plasma electrolytic oxidation: principle, structure, and performance10.1016/j.pmatsci.2020.100735 ↗
16. Microstructure and properties of Al2O3-ZrO2-TiO2 composite coatings prepared by plasma spraying10.1007/s12598-020-01505-2 ↗
17. Structural evolution of ZTA composites during synthesis and processing10.1016/j.jeurceramsoc.2014.10.031 ↗
18. Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending10.1016/j.jeurceramsoc.2017.11.056 ↗
19. Effect of NaAlO2 concentrations on microstructure and corrosion resistance of Al2O3/ZrO2 coatings formed on zirconium by micro-arc oxidation10.1016/j.apsusc.2010.04.017 ↗
20. Comparative study on corrosion behavior of plasma sprayed Al2O3, ZrO2, Al2O3/ZrO2 and ZrO2/Al2O3 coatings10.1016/S1003-6326(16)64236-X ↗
21. Oxidation and hot corrosion behavior of Al2O3/YSZ coatings prepared by cathode plasma electrolytic deposition10.1016/j.corsci.2016.03.017 ↗
22. Processing of alumina-zirconia composites by surface modification route with enhanced hardness and wear resistance10.1016/j.ceramint.2014.09.006 ↗
23. Enhancement of the hardness and wear-resistance of aluminum-silicon alloy using atmospheric plasma-sprayed ZrO2, Al2O3-ZrO2 multilayer, and Al2O3/ZrO2 composite coatings10.1088/2051-672X/ab9681 ↗
24. Microstructural analysis and thermal shock behavior of plasma sprayed ceria-stabilized zirconia thermal barrier coatings with micro and nano Al2O3 as a third layer10.1016/j.surfcoat.2015.10.030 ↗
25. A new strategy to obtain thin ZrO2-Al2O3 composite aerogel coating with prominent high-temperature resistance and rapid heat dissipation10.1016/j.jssc.2022.123384 ↗
26. Percolative mechanism of sliding wear in alumina/zirconia composites10.1016/j.jeurceramsoc.2005.05.008 ↗
27. Comparative ageing behaviour of commercial unworn and worn 3Y-TZP and zirconia-toughened alumina hip joints heads10.1016/j.jeurceramsoc.2012.01.003 ↗
28. Microstructure and corrosion resistance of Al2O3-ZrO2 composite coating on biomedical magnesium alloy fabricated by cathodic plasma electrolytic oxidation10.4028/www.scientific.net/AMM.184-185.1068 ↗
29. A nanoplate-like α-Al2O3 out-layered Al2O3-ZrO2 coating fabricated by micro-arc oxidation for hip joint prosthesis10.1016/j.apsusc.2015.11.132 ↗
30. Al2O3-ZrO2 composite coatings for thermal-barrier applications10.1016/S0266-3538(96)00111-X ↗
31. Microstructural stability oxidation and hot corrosion resistance of nanostructured Al2O3/YSZ composite compared to conventional YSZ TBC coatings10.1016/j.jallcom.2014.10.088 ↗
32. Hard ZrO2/Al2O3 nanolaminated PVD coatings evaluated by nanoindentation10.1016/j.surfcoat.2005.02.021 ↗
33. Hard coatings for cutting applications: physical vs chemical vapor deposition and future challenges for the coatings community10.1016/j.surfcoat.2021.127949 ↗
34. Synthesis of porous Al2O3/ZrO2 nanocomposites by chemical vapour deposition10.1080/17436753.2017.1280247 ↗
35. Coatings of metastable ceramics deposited by solution-precursor plasma spray: I. Binary ZrO2-Al2O3 system10.1016/j.actamat.2006.06.025 ↗
36. Fabrication and properties of plasma-sprayed Al2O3/ZrO2 composite coatings10.1007/s11666-011-9672-7 ↗
37. Synthesis and mechanical properties of ZrO2/Al2O3 composites prepared by spark plasma sintering10.1023/A:1006540532340 ↗
38. Preparation of ZrO2-Al2O3 composite membranes by sol-gel process and their characterization10.1016/j.msea.2003.10.321 ↗
39. Microstructure of sol-gel synthesized Al2O3-ZrO2(Y2O3) nano-composites studied by transmission electron microscopy10.1016/j.matlet.2004.10.030 ↗
40. Friction and wear behavior of ZrO2-Al2O3 composite coatings deposited by air plasma spraying: correlation with physical and mechanical properties10.1016/j.surfcoat.2009.03.056 ↗
41. Formation of Al2O3-ZrO2 composite coating on zirconium by micro-arc oxidation10.1016/j.scriptamat.2008.03.015 ↗
42. Plasma electrolytic oxidation of magnesium and its alloys: mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
43. Key factors determining the development of two morphologies of plasma electrolytic coatings on an Al-Cu-Li alloy in aluminate electrolytes10.1016/j.surfcoat.2016.02.054 ↗
44. Wear resistant coatings formed on Zircaloy-2 by plasma electrolytic oxidation in sodium aluminate electrolytes10.1016/j.electacta.2013.11.079 ↗
45. Electrochemical behaviour of titanium in KOH at high potential10.1016/j.electacta.2015.11.027 ↗
46. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
47. Improving the wear resistance of plasma electrolytic oxidation (PEO) coating applied on Mg and its alloys under the addition of nano- and micro-sized additives into the electrolytes: a review10.1016/j.jma.2020.11.016 ↗
48. Increasing the application fields of magnesium by ultraceramic®: corrosion and wear protection by plasma electrolytical oxidation (PEO) of Mg alloys10.1016/j.surfcoat.2019.04.025 ↗
49. Growth characteristics and corrosion resistance of micro-arc oxidation coating on Al-Mg composite plate10.1016/j.vacuum.2021.110640 ↗
50. Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications10.1016/j.surfcoat.2006.06.050 ↗
51. Preparation of the plasma electrolytic oxidation coating on Mg-Li alloy and its thermal control performance10.1016/j.surfcoat.2019.04.073 ↗
52. A study to enhance the mechanical durability of the MAO coating fabricated on the 7075 Al alloy for wear-related high temperature applications10.1016/j.surfcoat.2021.126843 ↗
53. Microstructural and corrosion properties of hydroxyapatite containing PEO coating produced on AZ31 Mg alloy10.3390/ma14061531 ↗
54. Biocompatible organic coatings based on bisphosphonic acid RGD-derivatives for PEO-modified titanium implants10.3390/molecules25010229 ↗
55. Optimization of the microstructure of TiO2 photocatalytic surfaces created by plasma electrolytic oxidation of titanium substrates10.1016/j.surfcoat.2021.127000 ↗
56. Enhanced ultraviolet light driven photocatalytic activity of ZnO particles incorporated by plasma electrolytic oxidation into Al2O3 coatings co-doped with Ce3+10.1016/j.optmat.2020.109768 ↗
57. Formation of a mestastable nanostructured mullite during plasma electrolytic oxidation of aluminium in “soft” regime condition10.1016/j.matdes.2019.107977 ↗
58. Discharge characterization in plasma electrolytic oxidation of aluminium10.1088/0022-3727/36/17/314 ↗
59. Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process10.1088/0022-3727/43/10/105203 ↗
60. Spectroscopic study of plasma during electrolytic oxidation of magnesium- and aluminium-alloy10.1016/j.jqsrt.2012.06.008 ↗
61. Investigation of plasma electrolytic oxidation on valve metals by means of molecular spectroscopy – a review10.1039/C4RA03873H ↗
62. A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals10.1080/09506608.2018.1466492 ↗
63. Incorporation of zirconia nanoparticles into coatings formed on aluminium by AC plasma electrolytic oxidation10.1007/s10800-008-9575-6 ↗
64. Dual incroporation of SiO2 and ZrO2 nanoparticles into the oxide layer on 6061 Al alloy via plasma electrolytic oxidation: coating structure and corrosion properties10.1016/j.jallcom.2016.11.098 ↗
65. Al2O3-ZrO2 nanocomposites coating on aluminium alloy by plasma electrolytic-electrophoretic hybrid process10.1016/j.mtcomm.2018.12.001 ↗
66. incorporation of Al2O3 and ZrO2 ceramics to AZ31 magnesium alloys composite coating using micro-arc oxidation method10.1016/j.jmbbm.2023.105784 ↗
67. Preparation and properties of composite ceramic coating containing Al2O3-ZrO2-Y2O3 on AZ91D magnesium alloy by plasma electrolytic oxidation10.1016/j.cap.2009.02.017 ↗
68. Preparation Al2O3/ZrO2 composite coating in an alkaline phosphate electrolyte containing K2ZrF6 on aluminium alloy by microarc oxidation10.1016/j.apsusc.2012.02.124 ↗
69. In situ growth of ZrO2-Al2O3 nano-crystalline ceramic coatings via micro arc oxidation of aluminum substrates10.1016/j.materresbull.2012.02.031 ↗
70. Al2O3-ZrO2 nanostructured coatings using DC plasma electrolytic oxidation to improve tribological properties of Al substrates10.1016/j.apsusc.2015.08.188 ↗
71. Alumina-zirconia coatings produced by Plasma Electrolytic Oxidation on Al alloy for corrosion resistance improvement10.1016/j.jallcom.2017.07.058 ↗
72. Characterization of Al2O3/ZrO2 composite coatings deposited on Zr-2.5Nb alloy by plasma electrolytic oxidation10.1016/j.apsusc.2018.04.207 ↗
73. An investigation on ZrO2 nano-particle incorporation, surface properties and electrochemical corrosion behaviour of PEO coating formed on Cp-Ti10.1016/j.surfcoat.2017.01.105 ↗
74. The incorporation of particles suspended in the electrolyte into plasma electrolytic oxidation coatings in Ti and Al substrates
75. Modulation effects of K2ZrF6 additive on microstructure and heat resistance of micro-arc oxide coatings fabricated on LY12 aluminium alloy10.3724/SP.J.1077.2010.00865 ↗
76. Towards a compact coating formed on Al6061 alloy in phosphate based electrolyte via two-step PEO process and K2ZrF6 additives10.1016/j.surfcoat.2017.09.013 ↗
77. Prepare and formation mechanism of the zirconia coating on aluminium alloy by plasma electrolytic oxidation10.3724/SP.J.1077.2009.00107 ↗
78. Electrolytic plasma technology: science and engineering - an overview10.1016/j.surfcoat.2006.11.023 ↗
79. Duplex surface treatment of metallic alloys combining cold-spray and plasma electrolytic oxidation technology10.1016/j.surfcoat.2020.125756 ↗
80. Dry surface preparation using supercritical cryogenic nitrogen jet improves the adhesion strength of cold gas sprayed coatings (SCNCS)10.4028/www.scientific.net/MSF.941.1668 ↗
81. Effects of electrical parameters on plasma electrolytic oxidation of aluminium10.1016/j.surfcoat.2013.01.029 ↗
82. Sequential run of the PEO process with various pulsed bipolar current waveforms10.1016/j.surfcoat.2019.06.057 ↗
83. The cod spray process and its potential for industrial applications10.1361/105996306X108110 ↗
84. The unique abilities of cold spray deposition10.1080/09506608.2016.1194948 ↗
85. Hydride precipitates in zirconium alloys (a review)10.1016/0022-3115(68)90021-4 ↗
86. A review on hydride precipitation in zirconium alloys10.1016/j.jnucmat.2015.07.014 ↗
87. investigation of Al-Al2O3 cold spray coating formation and properties10.1007/s11666-007-9086-8 ↗
88. The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys10.1016/j.surfcoat.2009.07.032 ↗
89. The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate10.1016/j.surfcoat.2010.06.008 ↗
90. Cold spray coating: review of material systems and future perspectives10.1179/1743294414Y.0000000270 ↗
91. Which powders for cold spray?10.1179/1743294414Y.0000000253 ↗
92. Changes induced by process parameters in oxide layers grown by the PEO process on Al alloys10.1016/j.surfcoat.2011.01.046 ↗
93. Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits10.1016/j.jallcom.2006.06.101 ↗
94. Preparation of TiAl3-Al composite coating by cold spray and its high temperature oxidation behavior10.1007/s11666-010-9516-x ↗
95. Fabrication of cold-sprayed Al-intermetallic compounds coatings by post annealing10.1016/j.msea.2006.06.044 ↗