Application of a novel automatic filler delivery method in induction brazing of copper pipes in heat pump manufacturing: A comparative study with pre-placed ring method
Source abstract
Abstract
Induction brazing offers localized heating and short brazing cycle, but joint quality is strongly influenced by filler metal delivery method. In industrial practice, filler metal is commonly applied as pre-placed rings; however, this approach is prone to defects. This study investigates a novel automatic wire-feeding method as an alternative to the conventional approach. Comparative experiments were conducted at brazing temperature ranging from 710 to 800°C using copper pipes with outer diameters of 9.6 mm and 9.8 mm and BCuP-Ag filler alloy. Joint quality was assessed through macrographic imaging and analyzed using a defect segmentation and classification algorithm built on YOLOv11. Mechanical properties and microstructure characteristics were evaluated through tensile testing, microhardness measurement, and SEM/EDS analysis. Results showed that defect area decreased with increasing temperature for both methods, with lower defect formation consistently observed in automatic wire feeding methods. Defect formation was also influenced by the gap size, with automatic method showing optimal performance in 0.045–0.140 mm clearance range. Higher temperatures enhanced filler spread and joint integrity; however, microhardness measurements and SEM/EDS results indicated that excessive brazing temperature promoted formation of intermetallic phases and microstructural degradation, whereas 750 °C provided an optimal balance of diffusion, bonding, and stability. Although tensile strengths were slightly higher in ring brazed joints, all fractures occurred in base metal, confirming joints integrity. The automatic wire feeding method demonstrated improved processes control, reduced defect formation, and consistent performance, making it a promising alternative for high-quality, repeatable joints in automated copper-brazing applications, particularly in HVAC and heat-pump systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Induction Heating and Inverter Technology · Magnetic Properties and Applications · Power Transformer Diagnostics and Insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Failure of a dissimilar metal braze in an expansion joint10.1007/s11668-019-00626-w ↗
2. Approaches and possibilities for reducing residual stresses in induction brazed cemented carbide/steel joints10.1007/s40194-020-00928-w ↗
3. Influence of process parameters on the formation and quality of joining zones during induction brazing10.1088/2631-8695/ab95e9 ↗
4. Effect of copper based filler composition on the strength of brazed joint10.15282/jmes.13.2.2019.22.0419 ↗
5. Fundamental aspects of ultrasonic assisted induction brazing of diamond onto 1045 steel10.1016/j.jmatprotec.2018.05.021 ↗
6. Comparison of simplified techniques for solving selected coupled electroheat problems10.1108/COMPEL-06-2019-0244 ↗
7. Recent advances in brazing fillers for joining of dissimilar materials
8. Fatigue of brazed joints made of X5CrNi18-10 and Cu110 and derivation of reliable assessment approaches10.1007/s40194-020-00850-1 ↗
9. Investigation on strength and microstructural evolution of porous cu/cu brazed joints using cu-ni-sn-p filler10.3390/met10030416 ↗
10. Microstructure and shear strength of sic joint brazed with LiAlSiO4 reinforced AgCuTi composite filler10.3390/met13040736 ↗
11. Wetting and spreading of agcuti on selective laser-melted ti-6al-4v10.3390/ma14174804 ↗
12. Braze Welding of Dissimilar Materials
13. Microstructure and mechanical properties of ZrB2-SiC/Nb joints brazed with CoFeNiCrCuTix high-entropy alloy filler10.1111/jace.17732 ↗
14. Effect of interfacial intermetallic compounds morphology on mechanical properties of laser brazing of aluminum to steel
15. Interfacial microstructure and mechanical properties of 1Cr18Ni9Ti/1Cr21Ni5Ti stainless steel joints brazed with Mn-based brazing filler
16. The use of Ni-Cr-Si-Be filler metals for brazing of stainless steels10.1088/1757-899X/130/1/012045 ↗
17. Strength and margins of brazed joints
18. Brazing of copper pipes for heat pump and refrigeration applications10.3390/met14020171 ↗
19. Physical and mechanical properties of copper and copper alloys10.1016/B978-0-08-056033-5.00122-1 ↗
20. Using deep learning to detect defects in manufacturing: A comprehensive survey and current challenges10.3390/ma13245755 ↗
21. A survey on Deep Learning based bearing fault diagnosis10.1016/j.neucom.2018.06.078 ↗
22. Visual-based defect detection and classification approaches for industrial applications—a SURVEY10.3390/s20051459 ↗
23. Large-complex-surface defect detection by hybrid gradient threshold segmentation and image registration
24. Multi-resolution and noise-resistant surface defect detection approach using new version of local binary patterns10.1080/08839514.2017.1378012 ↗
25. Image-based surface defect detection using deep learning: a review10.1115/1.4049535 ↗
26. Machine vision application for food quality: a review
27. Images, Pre-Trained Networks, and Information
28. State of the art in defect detection based on machine vision10.1007/s40684-021-00343-6 ↗
29. Surface defects detection of stamping and grinding flat parts based on machine vision10.3390/s20164531 ↗
30. Segmentation-based deep-learning approach for surface-defect detection10.1007/s10845-019-01476-x ↗
31. Kingma D.P., Ba J.L. Adam: A method for stochastic optimization. 3rd International Conference on Learning Representations, ICLR 2015 - Conference Track Proceedings, 2015.
32. Defect segmentation and classification in brazed joints using
33. Wetting and spreading behavior of molten brazing filler metallic alloys on metallic substrate10.1088/1757-899X/61/1/012017 ↗
34. Effect of copper-based fillers composition on spreading and wetting behaviour10.1088/1757-899X/238/1/012020 ↗
35. Effect of brazing temperature on microstructure and mechanical properties of graphite/copper joints10.1016/j.msea.2013.11.059 ↗
36. Microstructure and mechanical properties of Ti6Al4V alloy and sapphire joint brazed with graphene-AgCuTi
37. Effect of brazing temperature on microstructure and mechanical properties of TiAl/ZrB2 joint brazed with CuTiZrNi filler10.1016/j.jmapro.2019.09.001 ↗
38. Influence of gap clearance on brazing joint strength for Ni and Fe based filler metals
39. Influence of brazing process and gap size on the fatigue strength of shear and peel specimen10.1007/s40194-022-01304-6 ↗
40. Mechanical and microstructural behavior of brazed aluminum / stainless steel mixed joints10.1088/1757-899X/118/1/012003 ↗
41. The microstructures and mechanical properties of K465 superalloy joints, brazed with different clearances10.1007/s40194-015-0266-8 ↗
42. Principles of soldering and brazing. Choice Reviews Online 1994;31. https://doi.org/10.5860/choice.31-2706.1994.10.5860/CHOICE.31-2706 ↗
43. Low heat joining - manufacturing and fatigue strength of brazed, locally hardened structures
44. American Welding Society. Brazing Handbook. Brazing Handbook 2007.
45. Physical properties of selected brazing filler metals10.1179/136217104225021760 ↗
46. Brazing filler metals10.1080/09506608.2019.1613311 ↗
47. Effect of joining temperature and holding time on microstructure and shear strength of Ti2AlC/Cu joints brazed using Ag-Cu filler alloy10.1016/j.msea.2012.12.037 ↗
48. Visual observations of liquid filler metal flow within braze gap10.1179/136217104225017017 ↗
49. Wettability and microstructural evolution of copper filler in W and EUROFER brazed joints10.1007/s00170-024-13338-9 ↗
50. Effects of reactive air brazing parameters on the interfacial microstructure and shear strength of GDC-LSM/Crofer 22 APU joints10.4191/kcers.2019.56.4.11 ↗
51. Effect of brazing temperature on microstructure and properties of WC-10Ni + AgCuTi composite coatings
52. Formation of the reaction zone between tin-copper brazing fillers and aluminum-silicon-magnesium alloys: experiments and thermodynamic analysis10.1002/mawe.201700152 ↗
53. Phase transition, microstructural evolution and mechanical properties of Ti–6Al–4V and Ti–6.5Al–3.5Mo–1.5Zr–0.3Si joints brazed with Ti–Zr–Ni–Cu filler metal10.1007/s43452-020-00093-3 ↗
54. Interfacial microstructure and properties of Si3N4 Ceramics/Cu/304 stainless steel brazed by Ti40Zr25B0.2Cu amorphous solder10.3390/ma11112226 ↗
55. Mechanical behavior of reactive air brazed (RAB) Crofer 22 APU-Al2O3 joints at ambient temperature10.1007/s42452-020-2622-6 ↗
56. Microstructure and properties analysis of the brazing alloy prepared from recycled E-waste10.3389/fchem.2022.1038555 ↗
57. Microstructure evolution and shear strength of TiAl-based intermetallics joint vacuum brazed with TiH2–Ni–TiB2 powder filler10.1002/adem.202301185 ↗
58. Amorphization and intermetallic nucleation in early-stage interfacial diffusion during Sn-solder/Ni solid-state bonding10.1016/j.jallcom.2020.158399 ↗
59. Microstructural evolution during low-temperature brazing of WC-Co cemented carbide to AISI 4140 steel using a silver-based filler alloy10.1016/j.ijrmhm.2023.106354 ↗
60. Interfacial bonding mechanism and joint weakness area of brazed SiC and Nb with AuNi filler alloy: First-principles and experimental perspective10.1111/jace.19225 ↗
61. Nanoparticle enhanced eutectic reaction during diffusion brazing of aluminium to magnesium10.3390/nano9030370 ↗
62. Induction brazing of Inconel 718 to Inconel X-750 using Ni-Cr-Si-B amorphous foil10.1016/S0924-0136(00)00543-4 ↗
63. Atomistic assessment of melting point depression and enhanced interfacial diffusion of Cu in confinement with AlN10.1021/acsami.2c01347 ↗
64. Design of higher temperature copper brazing filler metals with reduced brittle phase content
65. Effect of holding time on interfacial reaction layer characteristics and mechanical performance of brazed diamonds with Cu-Sn-Ti-Ga filler metals10.1016/j.diamond.2022.108826 ↗
66. Materials characterization of advanced fillers for composites engineering applications10.1515/ntrev-2019-0045 ↗
67. Effect of crack bridging on the toughening of ceramic/graphene composites
68. Microstructural Evaluation of Copper Brazed Joints Using Silver-Based Filler Metal10.1007/s13632-021-00722-0 ↗
69. Effect of alumina strengthening particles on brazed joints of GlidCop Al-15 copper alloy
70. Effect of simulated brazing cycle on the microstructure and mechanical properties of cu-cr-zr-ti alloy10.4028/www.scientific.net/MSF.710.626 ↗
71. Effect of brazing temperature, filler thickness and post brazing heat treatment on the microstructure and mechanical properties of W-Eurofer joints brazed with Cu interlayers10.1016/j.jnucmat.2020.152117 ↗
72. Effect of Ni in pure Cu/304 stainless steel induction brazing joints10.1016/j.matchar.2021.111562 ↗
73. The bonding temperature effect of the diffusion brazing Inconel 625 superalloy on the microstructure changes, corrosion resistance, and mechanical properties10.1016/j.jmapro.2020.02.005 ↗
74. Effect of diffusion brazing time on microstructure, isothermal solidification completion and microhardness distribution during joining of Nicrofer 5520 superalloy using a liquated Ni-Cr-B interlayer10.1016/j.jmrt.2022.09.082 ↗