journal article·2026-02Open access

Atomic insight of deformation mechanism of monocrystalline pure iron upon equal channel angular pressing: Molecular dynamics simulation

Junaidi Syarif, Omarelfarouq Elgack, Amro Altoyuri, Belal Almomani, Fatayalkadri Citrawati

Abstract

Equal channel angular pressing (ECAP) is a widely used severe plastic deformation technique for producing ultrafine-grained metals with enhanced mechanical properties. Despite substantial experimental efforts that have established the macroscopic effects of ECAP, the atomic-scale deformation mechanisms in body-centered cubic (BCC) pure iron are still not fully understood. In particular, the role of initial crystallographic orientation in governing the competition between simple shear and compressive deformation during ECAP remains unresolved at the atomistic level. In this study, three monocrystalline pure iron samples with different initial orientations were examined using molecular dynamics simulations: a 100-sample with the [100] direction aligned parallel to the extrusion direction (ED), a 111-sample with the [111] direction aligned parallel to the ED, and an R45-sample with the [111] direction oriented at 45° to the ED. The deformation behavior was analyzed in terms of simple shear and compression mechanisms. The results reveal strong orientation dependence. The 100-sample predominantly deformed by simple shear throughout the extrusion process, consistent with shear factor predictions. In contrast, the 111-sample, characterized by fewer active slip systems, was mainly governed by compression, with simple shear occurring only at later stages. The R45-sample exhibited a mixed deformation behavior combining features of both orientations. All samples showed grain fragmentation and polycrystallization, while twin formation was observed in the 100-sample due to simple shear. These findings highlight the critical role of crystallographic orientation in ECAP deformation behavior and provide atomistic insights to support process optimization. • Molecular dynamics simulations reveal microstructural evolutions during ECAP. • ECAP deformation mechanism in Fe strongly depends on the initial crystal orientation. • Deformation mechanism is governed by compression, simple shear, or both. • All orientations lead to polycrystallization and lattice rotation after ECAP.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Nanomaterials by severe plastic deformation: review of historical developments and recent advances10.1080/21663831.2022.2029779 ↗
2. Severe plastic deformation-a review
3. G. Faraji, H.S. Kim, H.T. Kashi, Jan. 2018, Severe Plastic Deformation: Methods, Processing and Properties,” Severe Plastic Deformation: Methods, Processing and Properties. 131510.1016/C2016-0-05256-7.
4. Review: recent advances using severe plastic deformation to improve the properties of battery materials10.1007/s10853-023-09198-5 ↗
5. Influence of equal channel angular pressing on high cycle fatigue behavior of ultrafine-grained iron: role of anisotropy10.1016/j.msea.2017.11.075 ↗
6. Microstructure characterization of metallic materials processed by equal channel angular pressing (ECAP): an electron backscatter diffraction (EBSD) analysis10.2320/matertrans.MT-MF2022042 ↗
7. Paradoxes of severe plastic deformation10.1002/adem.200310089 ↗
8. A study of die parameters influencing the plastic deformation for 3D finite element simulations of equal-channel angular pressing10.1007/s10853-025-11249-y ↗
9. Optimization of equal channel angular pressing parameters for improving the hardness and microstructure properties of Al–Zn–Mg Alloy by Using Taguchi Method10.1007/s12540-020-00730-9 ↗
10. High-speed continuous equal channel angular pressing of 316 LVM stainless steel10.1016/j.matlet.2021.130631 ↗
11. Severe plastic deformation (SPD) processes for metals10.1016/j.cirp.2008.09.005 ↗
12. The influence of annealing temperature on the compressive deformation and damage behavior of ultrafine grained iron
13. Microstructural refinement and mechanical properties of ferritic stainless steel processed by equal-channel angular pressing10.1007/s11665-020-05131-y ↗
14. Mechanical, corrosion, nanotribological, and biocompatibility properties of equal channel angular pressed Ti-28Nb-35.4Zr alloys for biomedical applications10.1016/j.actbio.2022.07.005 ↗
15. Influence of processing route on the fracture resistance of equal channel angular pressing deformed iron10.1002/adem.202201011 ↗
16. Influence of grain refinement by ECAP on mechanical and erosion corrosion properties of AISI 4130 steel: experimental and prediction approach10.1007/s11661-019-05339-1 ↗
17. Development of texture in ultrafine-grained low-carbon steel processed through equal-channel angular pressing10.1007/s11665-019-04085-0 ↗
18. Analysis of hardness homogeneity in pure niobium subjected to equal channel angular pressing10.2320/matertrans.MT-M2021163 ↗
19. Enhanced yield stress and reduced elastic modulus of metastable β Ti–Nb alloys deformed by equal channel angular pressing attributed to the Synergistic effect of deformation mechanisms10.1016/j.msea.2024.146858 ↗
20. Molecular dynamics analysis on initial texture and processing route influences on grain refinement behavior of α-Fe by equal channel angular pressing10.4028/www.scientific.net/KEM.340-341.967 ↗
21. Atomistic modeling of idealized equal channel angular pressing process10.1007/s10853-024-09414-w ↗
22. Molecular dynamics analysis of microstructural deformation mechanisms in single crystal copper undergoing equal channel angular pressing
23. Equal channel angular pressing of single crystal aluminum: a molecular dynamics simulation10.1016/j.jmrt.2022.01.061 ↗
24. Deformation behavior of single-crystal magnesium during Nano-ECAP simulation10.1016/j.heliyon.2022.e11837 ↗
25. Evolution of microstructural deformation mechanisms under equal-channel angular extrusion loading conditions: a molecular dynamics case study of single crystal titanium10.1080/14786435.2020.1844331 ↗
26. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
27. Constant pressure molecular dynamics algorithms10.1063/1.467468 ↗
28. Embedded-atom potential for Fe and its application to self-diffusion on Fe(1 0 0)10.1016/j.susc.2006.02.010 ↗
29. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
30. Robust structural identification via polyhedral template matching10.1088/0965-0393/24/5/055007 ↗
31. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
32. Dynamics of viscoplastic deformation in amorphous solids10.1103/PhysRevE.57.7192 ↗
33. Comparison of simple and pure shear for an incompressible isotropic hyperelastic material under large deformation10.1016/j.polymertesting.2012.11.005 ↗
34. Hull · 2011
35. A new severe plastic deformation technique based on pure shear10.1016/j.msea.2014.12.024 ↗
36. Principles of deformation in single crystals of two different orientations processed by equal-channel angular pressing10.1016/j.msea.2008.03.053 ↗
37. Deformation heterogeneities in equal channel angular pressing10.2320/matertrans.MF201926 ↗
38. The application of equal-channel angular pressing to an aluminum single crystal10.1016/j.actamat.2003.11.028 ↗
39. Slip planes in bcc transition metals10.1179/1743280412Y.0000000015 ↗
40. Influence of crystal orientation on the processing of copper single crystals by ECAP10.1007/s10853-006-0753-9 ↗
41. Three Nb single crystals processed by equal-channel angular pressing - Part II: mesoscopic bands10.1016/j.actamat.2013.04.019 ↗
42. Twinning stress prediction in bcc metals and alloys10.1080/09500839.2014.955547 ↗
43. Strain and kinematic analysis in general shear zones10.1016/0191-8141(93)90075-L ↗
44. Review: modes and processes of severe plastic deformation (SPD)10.3390/ma11071175 ↗