Microstructural integrity and mechanical synergy at the ER2205–Inconel 718 interface in functionally graded wire arc additively manufactured bimetallic structures
Source abstract
Abstract
This study investigates the microstructural and mechanical behaviour of an ER2205–Inconel 718 bimetallic wall fabricated by gas metal arc welding (GMAW) based wire arc additive manufacturing (WAAM) technique. Twenty layers were deposited to build a well-bonded interface between ER2205 and Inconel 718. Optical microscopy, field-emission scanning electron microscopy, and electron backscatter diffraction analyses indicate a continuous interface with a narrow remelting zone and controlled dilution. ER2205 exhibited a stable duplex microstructure of ferrite and austenite, while Inconel 718 solidified with columnar dendritic morphology and revealed Nb and Mo rich interdendritic segregation. Grain size analysis indicated a broad distribution with maximum grains fall within 10–60 µm range and a peak near 90 µm due to combined thermal effects across the interface. XRD revealed γ-Ni, γ-NiFe, and α-Fe as major phases with a minor Cr₃C₂ peak, suggest limited diffusion without the formation of intermetallics. Microhardness measurements revealed a smooth transition across the wall with hardness increases from ER2205 to Inconel 718 and intermediate values at the interface. Tensile results revealed at ER2205 side ultimate tensile strength (UTS) of 667 MPa, yield strength (YS) of 239 MPa, and maximum elongation of 34%. The results indicate that WAAM enables the successful fabrication of ER2205–Inconel 718 bimetallic structures with strong bonding and reliable property transitions suitable for high-temperature and corrosive service environments.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure
2. Applications of wire arc additive manufacturing (WAAM) for aerospace component manufacturing10.1007/s00170-023-11623-7 ↗
3. Wire-arc directed energy deposition of steel onto tungsten substrate: fabricability and mechanical performance of synergistic structures10.1080/17452759.2024.2443578 ↗
4. A review on advances and challenges in wire arc additive manufacturing: Process parameters, microstructural evolution and material performance across alloys10.1016/j.jallcom.2025.180735 ↗
5. WAAM 2015–2025: a review of technological advancements, material applications, and emerging directions
6. Multi-wire additive manufacturing: a comprehensive review on materials, microstructure, methodological advances, and applications10.1016/j.rineng.2025.104814 ↗
7. Additive manufacturing of bimetallic structures: process challenges, interfacial engineering, and emerging intelligent approaches
8. Improvement of the fatigue resistance of super duplex stainless-steel (SDSS) components fabricated by wire arc additive manufacturing (WAAM)
9. Development of strong, oxidation and corrosion resistant nickel-based superalloys: critical review of challenges, progress and prospects10.1080/09506608.2018.1516713 ↗
10. Weldability, machinability and surfacing of commercial duplex stainless steel AISI2205 for marine applications – A recent review10.1016/j.jare.2017.01.002 ↗
11. An overview on additive manufacturing of duplex stainless steels: microstructure, mechanical properties, corrosion resistance, postheat treatment, and future perspectives10.1002/srin.202400463 ↗
12. Review on optimization of tensile, fatigue, and creep properties of additive manufactured nickel-based superalloys by modifying the microstructure and residual stress10.1111/ffe.70100 ↗
13. A performance comparison of additive manufactured creep-resistant superalloys10.1080/13621718.2023.2187925 ↗
14. Creep behaviour of additively manufactured nickel-based superalloys: a review10.1007/s10853-025-11359-7 ↗
15. Studies on the structural property, mechanical relationships and corrosion behaviour of Inconel 718 and SS 316L dissimilar joints by TIG welding without using activated flux10.1016/j.jmapro.2017.09.028 ↗
16. Influence of heat treatment on the microstructure and thermal conductivity of duplex stainless steel manufactured via wire arc additive manufacturing10.1177/09544089241309449 ↗
17. Wear characteristics of dissimilar SDSS 2507–IN 718 parts fabricated by cold metal transfer-based wire arc additive manufacturing10.1115/1.4067555 ↗
18. Mechanical and metallurgical properties of SS304L–IN718 bimetallic wall deposited using cold metal transfer10.1007/978-981-96-3821-5 ↗
19. Design and fabrication of wire arc additive manufacturing setup and enhanced tailored properties of dissimilar steel additively deposited by WAAM process10.1016/j.istruc.2025.108228 ↗
20. Effects of deposition strategies on microstructure and mechanical properties of 316L stainless steel and inconel 625 alloy dissimilar structure fabricated by cold metal transfer arc additive manufacturing10.1007/s11665-023-08615-9 ↗
21. Enhanced interface strength in steel-nickel bimetallic component fabricated using wire arc additive manufacturing with interweaving deposition strategy10.1016/j.jmst.2020.04.019 ↗
22. Microstructural characteristics and crack formation in additively manufactured bimetal material of 316L stainless steel and Inconel 625
23. Microstructure evolution of 2205 duplex stainless steel (DSS) and inconel 718 dissimilar welded joints and impact on corrosion and mechanical behavior10.1016/j.msea.2025.148136 ↗
24. Role of microstructure evolution during welding on mechanical properties and residual stresses of the inconel 718 and austenitic stainless steel 304l dissimilar weld joint10.1007/s11661-024-07571-w ↗
25. Local microstructure engineering of super duplex stainless steel via dual laser powder bed fusion – An analytical modeling and experimental approach
26. Dissolution of the Laves phase and δ-precipitate formation mechanism in additively manufactured Inconel 718 during post printing heat treatments
27. Mechanical characteristics and microstructural investigation of CMT deposited bimetallic SS316LSi-IN625 thin wall for WAAM10.1007/s40194-022-01403-4 ↗
28. Implementing machine learning in robotic wire arc additive manufacturing for minimizing surface roughness10.1080/0951192X.2024.2330091 ↗
29. Influence of process parameters on the physical and material properties of WAAM steels10.1016/j.conbuildmat.2025.141078 ↗
30. Recent progress and scientific challenges in wire-arc additive manufacturing of metallic multi-material structures
31. Influence of interlayer thermal cycling on microstructural evolution in WAAM processed carbon steel
32. Enhanced strength-ductility-toughness synergy in an HSLA steel with multi-gradient ultrafine grained structure by adopting a two-stage rolling coupling inter-pass ultra-fast cooling process10.1016/j.jmatprotec.2022.117832 ↗
33. The influence of intercritical temperature, ferrite-austenite morphology, and orientation relationship on martensitic transformation in dual phase steels
34. Optimizing the austenite stability in a ferritic lightweight steel through thermomechanical processing10.1016/j.matchar.2020.110367 ↗
35. Grain morphologies in additively manufactured alloys: From solidification fundamentals to advanced microstructure control10.1016/j.jmst.2025.02.033 ↗
36. Effect of microstructural characteristics on mechanical properties of austenitic, ferritic, and γ-α duplex stainless steels10.1007/s11661-018-5083-4 ↗
37. Effect of material gradation strategy on the microstructure and mechanical properties of directed energy deposition Inconel 718/CuCrZr compounds10.1016/j.jallcom.2025.184767 ↗
38. Regionalization of microstructure characteristics and mechanisms of slip transmission in oriented grains deposited by wire arc additive manufacturing10.1016/j.msea.2022.143529 ↗
39. Comparative study on crystallographic orientation, precipitation, phase transformation and mechanical response of Ni-rich NiTi alloy fabricated by WAAM at elevated substrate heating temperatures10.1016/j.msea.2020.140307 ↗
40. Additive manufacturing of duplex stainless steels: assessment of deposition processes, microstructure, and properties10.1007/s00170-023-11947-4 ↗
41. Comparative study of microstructure and mechanical properties of Nb-Ti-Al alloy fabricated by as-cast and laser directed energy deposition processing10.1016/j.ijrmhm.2025.107220 ↗
42. Influence of heat treatment temperature on microstructure, hardness and sensitization of UNS S32205 duplex stainless steel10.3390/ma17194715 ↗
43. Bimetallic additively manufactured structure (BAMS) of Inconel 625 and austenitic stainless steel: effect of heat-treatment on microstructure and mechanical properties10.1007/s00170-022-09723-x ↗
44. The microstructure evolution and tensile properties of Inconel 718 fabricated by high-deposition-rate laser directed energy deposition
45. Effect of process parameters on microstructure and properties of Inconel-718 superalloy fabricated by wire-arc direct energy deposition technique10.1016/j.jmrt.2025.06.026 ↗
46. Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire + arc additive manufacture process10.1016/j.jmatprotec.2018.10.023 ↗
47. G.S. Commons, S.G. Hill, Pulsed Arc Additive Manufacturing of a Functionally Graded ER2209 Duplex Stainless Steel and HSLA-100 Structure: Morphology, Characterization, and Mechanical Performance, n.d. 〈https://digitalcommons.georgiasouthern.edu/etd/2957〉.
48. Functionally graded deposition of dissimilar steel (316LSi and ER70S-6) fabricated through twin-wire arc additive manufacturing10.1016/j.matlet.2023.135395 ↗