journal article·2026-03Open access

Improving strength and corrosion resistance of the Cu-0.2Be-0.8Ni-0.1Al alloy via a dual-layer microstructure

Jinyun Wang, Pingda Xu, Zhenyu Hong, Ruibo Song, Fuping Dai

Abstract

Simultaneous enhancement of strength and corrosion resistance is imperative to extend the application and service life of low-beryllium copper alloys. Here, a distinctive dual-layer microstructure, including a 240 μm-thick gradient fine-grain surface layer with sparse precipitates and a deformed coarse-grain matrix containing dense precipitates, is produced in the Cu‑0.2Be‑0.8Ni‑0.1Al alloy via rolling to matrix and ultrasonic modification to surface layer followed by aging. This architecture delivers high tensile strength (868.2 MPa) and low corrosion current density (2.1 μA/cm 2 ), significantly outperforming those of the conventionally aged alloy (421.6 MPa and 5.1 μA/cm 2 ) and the rolled-aged alloy (752.4 MPa and 19.7 μA/cm 2 ). The enhanced strength results from synergistic effects of grain boundary, deformation, precipitation and hetero-deformation-induced strengthening. The improved corrosion resistance arises from the ultrafine-grained surface layer with spare precipitates, which can form dense and stable passive film and suppress the micro-galvanic corrosion. This study provides a viable microstructural design strategy for developing high-performance low-beryllium copper alloys with high strength and good corrosion resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Nanoporous metals and alloys · Metallurgy and Material Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Design of high-performance Cu-Be alloy based on machine learning with integrated phase diagram information10.1007/s12598-025-03331-w ↗
2. Comprehensive analysis of beryllium content influence on secondary electron yield in Cu-Be alloys10.1016/j.matchar.2024.114553 ↗
3. Effects of grain size on stress relaxation and tensile properties of C17200 micro-wires10.1016/j.matchar.2025.115674 ↗
4. Study on the effect of heat treatment on the microstructure and properties of C17300 beryllium copper alloy microwires10.1016/j.jmrt.2023.06.274 ↗
5. Insight into patina formed on beryllium-bronze after 29 years of exposure in an industrial environment and DFT research10.1016/j.jmrt.2024.07.092 ↗
6. Insight into the mechanism of alloying elements (Sn, Be) effect on copper corrosion during long-term degradation in harsh marine environment10.1016/j.apsusc.2018.06.029 ↗
7. Precipitation behaviors and strengthening mechanisms of Cu-Be-Ni alloy aging at 360 ℃10.1016/j.matchar.2025.115808 ↗
8. Precipitation behavior and properties of aged Cu-0.23Be-0.84Co alloy10.1016/j.jallcom.2015.10.290 ↗
9. Effect of Al content on microstructure and properties of Cu-Be-Ni alloy10.1016/S1003-6326(21)65713-8 ↗
10. Bend formability and strength of Cu-Be-Co alloys10.1007/s10853-010-5232-7 ↗
11. The effect of silicon on the microstructure and properties of aged Cu-2.2Ni-0.4Be alloy10.1016/j.jallcom.2022.164680 ↗
12. Mechanical properties optimization of a Cu-Be-Co-Ni alloy by precipitation design10.1016/j.jallcom.2016.11.014 ↗
13. Evolution of electrical contact status and wear pattern under various loading conditions for copper-beryllium alloy
14. Microstructure, electrical conductivity, and stress relaxation resistance of Cu-0.3Be-0.5Co alloy under heat treatment and two‑stage cold rolling10.1007/s10854-025-14831-x ↗
15. The Portevin-Le Chatelier effect of Cu-2.0Be alloy during hot compression10.3390/ma16124455 ↗
16. Synergistic enhancing strength and conductivity of Cu-Be alloy via long-range ordering distribution of Be atoms10.1016/j.msea.2025.149300 ↗
17. Multiscale architectural synergy in Cu-Be-Ni-Cr-Zr alloy
18. Rolling contact fatigue behaviors of C17200 beryllium-copper alloy processed by surface mechanical rolling treatment10.1007/s11665-024-10103-7 ↗
19. Double-peak age strengthening phenomenon and mechanism of Cu-Be-Ni-Co alloys10.1016/j.matdes.2024.112666 ↗
20. Specific very high cycle fatigue fracture mechanism in C17200 beryllium copper alloy caused by grain boundary precipitates and persistent slip bands10.1016/j.engfracmech.2025.111113 ↗
21. Recent advances in protective technologies against copper corrosion10.1016/j.jmst.2024.02.060 ↗
22. Corrosion behavior of TaC/Ta composite coatings on C17200 alloy by plasma surface alloying and CVD carburizing10.1016/j.surfcoat.2018.12.074 ↗
23. Surface modification of C17200 copper-beryllium alloy by plasma nitriding of Cu-Ti gradient film10.1007/s11665-018-3190-4 ↗
24. Effect of ultrasonic nanocrystal surface modification on corrosion behavior of additively manufactured Inconel 62510.1016/j.matchar.2025.115559 ↗
25. Magnetic-assisted ultrasonic nanocrystal surface modification induced microstructures of titanium alloy10.1016/j.surfcoat.2024.130892 ↗
26. Insights into the strengthening mechanisms of titanium alloy treated by electropulsing-assisted ultrasonic nanocrystal surface modification: Process, microstructure, and deformation behavior
27. Post-processing of additively manufactured Ti64 alloy using electropulsing-assisted ultrasonic nanocrystal surface modification10.1016/j.matchar.2025.115413 ↗
28. Effect of ultrasonic nanocrystal surface modification on microstructural evolution and tribological properties of pure tungsten10.1016/j.triboint.2025.110792 ↗
29. Simultaneously improving corrosion and fatigue resistance of A100 steel by laser assisted ultrasonic nanocrystal surface modification10.1016/j.ijfatigue.2025.109056 ↗
30. Advanced post-processing of Ti-6Al-4V alloy fabricated by selective laser melting: A study of laser shock peening and ultrasonic nanocrystal surface modification10.1016/j.jmrt.2025.02.038 ↗
31. Effect of ultrasonic nanocrystal surface modification on fuel-lubricated wear mechanisms of thermal spray Al2O3-TiO2 coating
32. Enhancing mechanical and electrical properties of the Cu-0.2Be-1.0Ni alloy via dual plastic deformations10.1016/j.jmrt.2025.07.125 ↗
33. Effects of Ni content on microstructure and properties of aged Cu-0.4Be alloy10.1016/S1003-6326(21)65529-2 ↗
34. Dual-stage corrosion mechanisms and antibacterial enhancement of Cu-Sn-P alloys with Si and Al microalloying in simulated body fluid10.1016/j.matdes.2025.113635 ↗
35. Overcoming the trade-off between conductivity and strength in copper alloys through undercooling10.1038/s41467-025-60346-8 ↗
36. Ultrasonic effects on the microstructures and properties of the cast Cu‑0.2Be‑1.0Co alloy10.1007/s12540-025-01904-z ↗
37. Microstructures and properties of ultrasonically surface-modified Cu-0.2Be-1.0Co alloy10.1080/02670844.2023.2253392 ↗
38. The effect of aging process on the microstructure and mechanical properties of a Cu-Be-Co-Ni alloy10.1016/j.matdes.2015.06.157 ↗
39. Precipitation behavior and electrical conductivity and mechanical properties of Cu-0.9Be-1.5Ni-0.04Y alloy
40. Precipitation behavior, microstructure and properties of aged Cu-1.7 wt% Be alloy10.1016/j.jallcom.2018.09.296 ↗
41. The precipitation behavior and strengthening of a Cu-2.0 wt% Be alloy10.1016/j.msea.2012.08.007 ↗
42. Precipitation behavior of Cu-1.9Be-0.3Ni-0.15Co alloy during aging10.1007/s40195-014-0198-0 ↗
43. Tailoring precipitate distribution in 2024 aluminum alloy for improving strength and corrosion resistance10.1016/j.jmst.2023.12.055 ↗
44. Impedance analysis of electrochemical systems10.1021/acs.chemrev.1c00876 ↗
45. Effect of further precipitate refinement on mechanical properties and corrosion behavior of additively manufactured nickel aluminum bronze10.1016/j.corsci.2025.113114 ↗
46. Superior corrosion resistance and its origins in an additively manufactured Co-Cr-Ni-Al-Ti high-entropy alloy with nano-lamellar precipitates10.1016/j.jmst.2024.12.072 ↗
47. Synergistic effects of grain sizes on the corrosion behavior and mechanical properties in a metastable high-entropy alloy10.1016/j.corsci.2023.111588 ↗
48. Microstructural evolution, mechanical properties and corrosion mechanisms of additively manufactured biodegradable Zn-Cu alloys10.1016/j.jmst.2023.10.052 ↗
49. The interaction between in situ grain refiner and ultrasonic treatment and its influence on the mechanical properties of Mg-Sm-Al magnesium alloy10.1016/j.jmrt.2020.06.044 ↗
50. Effects of residual stress on the mechanical properties of copper processed using ultrasonic-nanocrystalline surface modification10.1080/21663831.2018.1560370 ↗
51. Interrogation of the microstructure and residual stress of a nickel-base alloy subjected to surface severe plastic deformation10.1016/j.actamat.2007.10.003 ↗
52. Anisotropic effects in elastic and incipient plastic deformation under (001), (110), and (111) nanoindentation of Al and Cu10.1103/PhysRevB.75.035415 ↗
53. Microstructure, mechanical properties and aging behaviour of nanocrystalline copper-beryllium alloy10.1016/j.msea.2018.12.011 ↗
54. Precipitate sequence, strengthening mechanism and properties of Cu-0.9Be-1.0Ni alloys prepared by powder metallurgy10.1016/j.matdes.2026.115481 ↗
55. Improving the stability of microstructure and mechanical property in Cu-9Ni-6Sn-0.2Nb alloy by annealing treatment10.1016/j.msea.2024.147302 ↗
56. Speight · 2005
57. Beryllium oxide utilized in nuclear reactors: Part I: Application history, thermal properties, mechanical properties, corrosion behavior and fabrication methods10.1016/j.net.2022.07.017 ↗
58. Microstructure and corrosion properties of Cr41CoFeNi eutectic high-entropy alloy in sulfuric acid solution10.1016/j.jallcom.2024.173443 ↗
59. Revealing the relationship between grain size and corrosion rate of metals10.1016/j.scriptamat.2010.08.035 ↗