journal article·2026-03Open access

Based on CFD and the Metzner-Otto theory: Mechanisms governing the influence of non-Newtonian fluid properties on flow field and power characteristics in spiral stirred kettles

Hailun Ren, Jing Han, Wenhui Shen, Lu Wang, YingHui Cai, Xubin Zhang, Xinhui Sui, Qingzhao Liu, Weihong Li, Pengpeng Hao, Huidong Yang

Abstract

Spiral stirred kettles are frequently employed for processing high-viscosity non-Newtonian fluids due to their exceptional stability and high energy efficiency. However, the complex helical structure and rheological properties of non-Newtonian fluids render flow field and power prediction challenging. Consequently, this study employs computational fluid dynamics (CFD) alongside the Metzner-Otto theory to simulate the flow field and power characteristics when spiral stirred kettles process various non-Newtonian fluids. Findings reveal that higher consistency coefficient ( m ) and higher flow index ( n ) of non-Newtonian fluids correlate with increased stirring torque and Np values. To reduce the effect of fluid rheology on the power prediction, the traditional Np - Re correlation was corrected by introducing m and n . The resulting equation is Np = 184.21096 m 0.0523 n 0.29841 Rea –0.98235 , (within 20% error and applicable to Rea : 0.3-16, m : 14–44, n : 0.07–0.57). The conclusions not only fill a gap in existing research on screw agitators but also provide a comprehensive theoretical basis for optimizing the design of stirring equipment for efficiently processing non-Newtonian fluids in actual industrial production.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Rheology and Fluid Dynamics Studies · Fluid Dynamics and Mixing · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Characterisation and analysis on the agitation of downward pitched blade turbine in the Stirred Tank Reactor10.1016/j.cej.2023.144556 ↗
2. Experimental and computational investigation of chaotic advection mixing in laminar rectangular stirred tanks10.1016/j.cej.2024.149956 ↗
3. The effect of radial impeller geometry on the link between power and flow numbers
4. CFD simulation of power characteristics and flow field distribution of different spiral stirring paddles10.1016/j.cep.2024.110033 ↗
5. Numerical simulation of power and flow field characteristics of different spiral stirred reactors10.1016/j.cjche.2024.10.021 ↗
6. Shear rate and direct numerical calculation of the Metzner-Otto constant for a pitched blade turbine10.1016/j.jfoodeng.2019.03.021 ↗
7. Viscosity influence on hydrodynamics behaviour in a stirred tank reactor10.1016/j.cherd.2025.05.024 ↗
8. Torrez · Power Consum. a Rushton Turbine Mixing Viscous Newton. Shear-thinning Fluid. Comp. Exp. Numer. Results · 1998 · 21 · 599
9. Non-Newtonian Fluids: An Introduction
10. Mixing of Highly Viscous Fluids, Polymers, and Pastes
11. Numerical simulation and analysis of power consumption and Metzner-Otto constant for impeller of 6PBT10.3901/CJME.2014.03.635 ↗
12. Mixing of power-law fluids using anchors: Metzner-Otto concept revisited
13. Mixing of complex fluids with flat-bladed impellers: effect of impeller geometry and highly shear-thinning behavior10.1016/j.cep.2003.11.005 ↗
14. Rheological and Structural Changes During the Mixing of Suspensions and Emulsions
15. Rheological properties of digestate from agricultural biogas plants: An overview of measurement techniques and influencing factors10.1016/j.rser.2020.109709 ↗
16. Process viscometry in flows of non-Newtonian fluids using an anchor agitator10.1007/s13367-017-0031-1 ↗
17. Mixing of Newtonian and viscoelastic fluids using “butterfly” impellers10.1016/j.ces.2015.09.026 ↗
18. Power consumption characteristics of an in-line silverson high shear mixer10.1002/aic.12703 ↗
19. Evaluation of a helical ribbon impeller as a viscosity measuring device for fluid foods with particles10.1515/arh-2002-0018 ↗
20. Scale-up in laminar and transient regimes of a multi-stage stirrer, a CFD approach10.1016/S0009-2509(02)00371-8 ↗
21. Power Consumption and Fluid Mixing in a Scale-Down Geometry of a Stirred Digester for Biogas Production10.1021/acsengineeringau.2c00047 ↗
22. Power-draw analysis of a coaxial mixer with Newtonian and non-Newtonian fluids in the laminar regime10.1016/S0009-2509(02)00238-5 ↗
23. Modeling of power characteristics for multistage rotor–stator mixers of shear-thinning fluids10.1016/j.ces.2014.06.039 ↗
24. A direct calculation method of the Metzner-Otto constant by using computational fluid dynamics10.1016/j.ces.2017.09.023 ↗
25. Numerical investigation of hydrodynamics and heat transfer for Bingham-pseudoplastic fluids in an industrial coiled stirred tank
26. Computational fluid dynamics analysis of power dissipation and shear rate distribution for highly viscous and highly shear-thinning fluids in stirred tanks10.1016/j.cherd.2025.02.022 ↗
27. CFD simulation of floating particles suspension in a stirred tank10.1007/s11696-017-0128-5 ↗
28. Impeller shape-optimization of stirred-tank reactor: CFD and fluid structure interaction analyses10.1016/j.cej.2020.127497 ↗
29. Domination of fluid rheological parameters on gold nanofluid drug delivery in trapezoidal stenosed vessel
30. Impact of non-identical forms of stenosis on the power-law model of non-Newtonian blood flow in a multi-stenosed carotid artery
31. Numerical Investigation of Degassing Behavior of Highly Viscous Non-Newtonian Fluids under Stirring10.1002/ceat.201900269 ↗
32. CFD prediction of fluid flow and mixing in stirred tanks: Numerical issues about the RANS simulations10.1016/j.compchemeng.2010.12.007 ↗
33. Numerical simulation of hydrodynamic properties of perforated corrugated sheet materials
34. CFD modeling and simulation of the hydrodynamics characteristics of packed column with structured sinusoidal corrugated sheets packings10.1016/j.cherd.2022.04.038 ↗
35. Multi-scale CFD study of multiphase flow in structured sinusoidal corrugated sheets packings10.1016/j.cherd.2023.10.004 ↗
36. The Effects of Power Law Fluid Rheology on Coil Heat Transfer for Agitated Vessel in the Transitional Flow Regime10.1002/cjce.5450820615 ↗
37. Using CFD to predict the behavior of power law fluids near axial-flow impellers operating in the transitional flow regime10.1016/S0009-2509(03)00060-5 ↗
38. Investigation of power characteristics in a novel cup-shaped-blade mixer10.1016/j.cep.2018.01.025 ↗
39. Power consumption and form drag of regular and fractal-shaped turbines in a stirred tank