journal article·2026-03Open access

Fabrication of cellulose nanofibril aerogels via emulsion templating and supercritical carbon dioxide drying

Dikshya Pokhrel, Sumanjot Kaur, Shuaib A. Mubarak, Islam Elsayed, El Barbary Hassan, Ali Ubeyitogullari, Yunsang Kim

Abstract

Cellulose nanofibril (CNF) aerogels were fabricated using CNF-stabilized oil-in-water (O/W) Pickering emulsions as templates, followed by sequential solvent exchange with ethanol and supercritical carbon dioxide (SC-CO₂) drying. Stable CNF-based O/W emulsions were prepared using a 0.1% CNF aqueous suspension as the continuous water phase, and either n -hexane or n -hexadecane as the dispersed oil phase, yielding average droplet sizes of 14.1 ± 4.4 μm and 10.1 ± 2.2 μm, respectively. The emulsions had an oil volume fraction of 40%, classifying them as medium internal phase emulsions. The O/W emulsion as a template compels cellulose nanofibrils to assemble around oil droplets, creating a hollow microcapsule-like structure. The emulsion-templated aerogels were then characterized for their morphology and pore structure. Thermogravimetric analysis confirmed complete removal of the oil phase in the aerogels. Compared to neat CNF aerogels and freeze-dried cryogels, the emulsion-templated aerogels contained microcapsule-like features observed in SEM images whose sizes and distributions resembled those of emulsion droplets. BET analysis showed that the emulsion-templated aerogels exhibited a maximum specific surface area (SSA) of 183 m²/g. This SSA was slightly lower than that of the neat CNF aerogel (216 m²/g), suggesting limited mesopore formation, which may be due to partial miscibility between the oil phase and ethanol during solvent exchange. Nonetheless, the emulsion-templating approach effectively produced CNF aerogels with hollow microcapsule-like features with nanofibrillar shells, creating hierarchical porosity with macro- and mesopores. To the best of our knowledge, this is the first report to integrate emulsion templating with SC-CO₂ drying to fabricate CNF aerogels, offering a promising strategy for the fabrication of bio-based materials with tailored pore structures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Aerogels and thermal insulation · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Aerogels and related porous materials10.1021/cr00094a003 ↗
2. Formation of nanoporous aerogels from wheat starch10.1016/j.carbpol.2016.03.086 ↗
3. Cellulose aerogels: synthesis, applications, and prospects
4. Polysaccharide-based porous biopolymers for enhanced bioaccessibility and bioavailability of bioactive food compounds: challenges, advances, and opportunities10.1111/1541-4337.13049 ↗
5. Data-driven review on aerogels and polymeric aerogels10.1002/anie.202504250 ↗
6. Transformation from hydrogels to nanostructured aerogels: review and future perspectives10.1021/acsanm.5c02544 ↗
7. Renewable biomass-based aerogels: from structural design to functional regulation10.1039/D3CS01014G ↗
8. Nanocellulose-based lightweight porous materials: A review10.1016/j.carbpol.2020.117489 ↗
9. Recent progress on nanocellulose aerogels: preparation, modification, composite fabrication, applications10.1002/adma.202005569 ↗
10. Recent developments in nanocellulose-based aerogels in thermal applications: a review10.1021/acsnano.0c09678 ↗
11. Advanced superhydrophobic and multifunctional nanocellulose aerogels for oil/water separation: A review10.1016/j.carbpol.2022.120242 ↗
12. Review on recent advances in cellulose nanofibril based hybrid aerogels: Synthesis, properties and their applications10.1016/j.ijbiomac.2024.129460 ↗
13. Nanocellulose-based foams and aerogels: processing, properties, and applications10.1039/C7TA02807E ↗
14. Amphiphilic superabsorbent cellulose nanofibril aerogels10.1039/C4TA00743C ↗
15. Freeze–Thaw Gelation of Cellulose Nanocrystals10.1021/acsmacrolett.9b00140 ↗
16. Generation of porous starch beads via a 3D food printer: The effects of amylose content and drying technique10.1016/j.carbpol.2022.120296 ↗
17. Cellulose aero-, cryo- and xerogels: towards understanding of morphology control10.1007/s10570-016-0960-8 ↗
18. Design of aerogels, cryogels and xerogels of cellulose with hierarchical porous structures10.1016/j.matdes.2015.12.041 ↗
19. Hierarchically porous materials: synthesis strategies and structure design10.1039/C6CS00829A ↗
20. Advances in hierarchically porous materials: Fundamentals, preparation and applications10.1016/j.rser.2024.114641 ↗
21. Synthesis and applications of emulsion-templated porous materials10.1039/b502551f ↗
22. High Internal Phase Emulsion Templating – A Path To Hierarchically Porous Functional Polymers10.1002/marc.201200393 ↗
23. Emulsion Templating: Porous Polymers and Beyond10.1021/acs.macromol.8b02576 ↗
24. Fundamentals and Design-Led Synthesis of Emulsion-Templated Porous Materials for Environmental Applications
25. Flexible and Super Thermal Insulating Cellulose Nanofibril/Emulsion Composite Aerogel with Quasi-Closed Pores10.1021/acsami.0c14091 ↗
26. Cellulose Nanofibril Stabilized Pickering Emulsion Templated Aerogel with High Oil Absorption Capacity10.1021/acsomega.3c03871 ↗
27. Freeze Casting: From Low-Dimensional Building Blocks to Aligned Porous Structures—A Review of Novel Materials, Methods, and Applications10.1002/adma.201907176 ↗
29. Cellulose Nanofibril Aerogels Derived from Pickering Emulsion Templates with Anisotropic Droplet Sizes10.1016/j.colsurfa.2025.136393 ↗
30. Formation of nanoporous aerogels from defatted rice bran via supercritical carbon dioxide drying10.1039/D3FB00069A ↗
31. Microencapsulated phase change material via Pickering emulsion stabilized by cellulose nanofibrils for thermal energy storage10.1016/j.carbpol.2021.118745 ↗
32. Efficient phase-change polymer composite film from emulsion gels stabilized by cellulose nanofiber-based amphiphiles10.1021/acsapm.1c00769 ↗
33. High internal phase emulsion templating as a route to well-defined porous polymers10.1016/j.polymer.2004.11.097 ↗
34. High internal phase Pickering emulsions10.1016/j.cocis.2021.101556 ↗
35. New pickering emulsions stabilized by bacterial cellulose nanocrystals10.1021/la200971f ↗
36. Self-assembling behavior of cellulose nanoparticles during freeze-drying: effect of suspension concentration, particle size, crystal structure, and surface charge10.1021/bm4001734 ↗
37. Directional freezing of nanocellulose dispersions aligns the rod-like particles and produces low-density and robust particle networks10.1021/acs.biomac.6b00304 ↗
38. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
39. Adjusting the pore size of nano-cellulose aerogel by heat treatment in the gel stage10.1088/2053-1591/ab13c6 ↗
40. Review on the aerogel-type oil sorbents derived from nanocellulose10.1021/acssuschemeng.6b02301 ↗
41. Revisiting the liquid–liquid phase behavior of n-alkanes and ethanol10.1021/acs.jpcb.9b07214 ↗
42. Developing dual nano/macroporous starch bioaerogels via emulsion templating and supercritical carbon dioxide drying10.1016/j.carbpol.2022.119607 ↗
43. Solubility of n-alkanes in supercritical CO2 at diverse temperature and pressure10.1016/j.jcou.2014.12.002 ↗