Effect of Ca addition on the microstructure and elevated-temperature properties of extruded Mg-Si-Zn based alloys
Source abstract
Abstract
The inferior high-temperature performance of Mg alloy has long limited their widespread application. Mg-Si series alloys emerge as a viable and low-cost option. However, the coarse heat-resistant Mg 2 Si phases in the microstructure result in their low strength and poor room-temperature ductility. Although significant progress has been made in improving the room-temperature properties of Mg-Si alloys by the combination of Ca addition and hot extrusion, their specific role and mechanism in enhancing high-temperature performance have not been specifically addressed. Herein, Mg-2.5Si-4Zn-xCa alloys were prepared by combining Ca modification with hot extrusion and the influence of Ca content on the microstructure, texture, and elevated-temperature mechanical properties of the extruded Mg-2.5Si-4Zn-xCa alloys was systematically examined. The results indicate that as the Ca content increased from 0% to 0.7%, the size of both primary and eutectic Mg 2 Si in the alloy gradually decreased, and the recrystallized grain size of the α-Mg was correspondingly refined. Under identical extrusion conditions, the Mg 2 Si phase in the extruded Ca-containing alloy undergoes a higher degree of fragmentation compared to the Ca-free alloy. The addition of Ca promotes the formation of the CaMgSi phase in the Mg-Si-Zn alloy during hot extrusion, which in turn facilitates further fragmentation of the Mg 2 Si phase. At a calcium content of 0.7 wt.%, the alloy demonstrated the best mechanical properties at room temperature and elevated temperatures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. A review of the design, processes, and properties of Mg-based composites10.1515/ntrev-2022-0043 ↗
2. Effect of heat treatment on the microstructure and corrosion properties of plasma wire arc additive manufactured Mg-Gd-Y-Zr alloy
3. Enhanced mechanical properties and electromagnetic interference shielding effectiveness in Mg-6Zn-1Y-1La-0.5Zr alloy sheet by hot deformation10.1016/j.jallcom.2024.175716 ↗
4. Cryogenic and conventional milling of AZ91 magnesium alloy10.1016/j.jma.2024.06.004 ↗
5. Improving the mechanical properties of a WE54 magnesium alloy through severe friction stir processing and rapid cooling10.1016/j.msea.2022.143963 ↗
6. Effect of heat treatment on microstructure and mechanical properties of WE43 alloy fabricated by wire arc additive manufacturing
7. Hot deformation behaviors and microstructure evolution of Mg-Si-Sr alloy10.1088/2053-1591/abb153 ↗
8. Morphology modification of Mg2Si by Sr addition in Mg-4%Si alloy10.1016/S1003-6326(11)60952-7 ↗
9. Recent advances in cost-effective aluminum alloys with enhanced mechanical performance for high-temperature applications: A review10.1016/j.matdes.2025.113869 ↗
10. Phase equilibria and thermodynamic modeling of the Mg-Si-Y system
11. Effect of co-modification by Ba and Sb on the microstructure of Mg2Si/Mg-Zn-Si composite and mechanism10.1016/j.jallcom.2013.12.041 ↗
12. Efficient modification eutectic Si of Al-10Si alloy with Mg-Gd master alloy addition
13. Effect of Ca on the microstructure and tensile properties of Mg-Zn-Si alloys at ambient and elevated temperature10.1016/j.jallcom.2012.05.047 ↗
14. Effect of Ba-Nd Composite Modification on Microstructure and Mechanical Properties of Mg-3Si-4Zn Cast Alloy
15. Effect of Er-Ba composite modification on microstructure and mechanical properties of Mg-2.5Si-4Zn cast alloy
16. Effects of Ca-Y compound modification on microstructure and properties of Mg-Si-Zn alloy with high Si content
17. Effects of Sr-Y compound modification on microstructure and properties of Mg-Si-Zn alloy with high Si content
18. Effects of different hot extrusion processes on corrosion behavior of Mg-6Gd-1Zn-0.5Zr alloy in 3.5 wt% sodium chloride solution
19. Enhanced strength-ductility synergy of Mg-Gd-Y-Zn-Zr alloy with gradient microstructure and abnormal texture via rotary backward extrusion
20. Effect of ECAP temperature and deformation route on mechanical properties of pre-extruded Mg-5Gd-3Y-1Zn-0.5Zr alloys10.1016/j.jmst.2024.03.086 ↗
21. Mechanical behavior of As-cast and extruded Mg-Si-Ni-Ca magnesium alloys10.1007/s11665-020-05229-3 ↗
22. Effect of La inoculation on composition, content, granularity and mechanical properties of in-situ Al-30wt%Mg2Si Composite10.1016/j.msea.2017.08.010 ↗
23. Effect of Ag addition on the elevated-temperature mechanical properties of an extruded high strength Mg-Gd-Y-Zr alloy10.1016/j.msea.2014.07.022 ↗
24. Microstructure and strength of quasicrystal containing extruded Mg-Zn-Y alloys for elevated temperature application10.1016/S0921-5093(04)00903-7 ↗
25. Research on extrusion welding of dissimilar magnesium alloys: Mg-Al-Zn and Mg-Gd10.1016/j.jmrt.2025.01.103 ↗
26. Effect of microalloying by Ca on the microstructure and mechanical properties of as-cast and wrought Mg-Mg2Si composites
27. Effect of extrusion temperatures on the microstructure, texture, and mechanical properties of Mg-5Sn-1Si-0.6Ca alloy10.1016/j.jmrt.2023.08.097 ↗
28. Molecular dynamics study on structural characteristics of amorphous C-S-H with different Ca/Si ratios10.1111/jace.20134 ↗
29. Improvement of contact and bonding performance of Mg2Si/Mg2SiNi3 thermoelectric joints by optimizing the concentration gradient of Mg10.1007/s11664-022-09477-y ↗
30. Achieving advanced elevated-temperature strength by tailoring precipitates in Mg-Sn-Y alloys
31. Enhanced high-temperature strength of a Mg-4Sn-3Al-1Zn alloy with good thermal stability via Mg2Sn precipitation
32. Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion
33. Particle effects on recrystallization in magnesium–manganese alloys: particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
34. Calcium and zirconium as texture modifiers during rolling and annealing of magnesium–zinc alloys10.1016/j.matchar.2015.02.002 ↗
35. Resolving localized geometrically necessary dislocation densities in Al-Mg polycrystal via in situ EBSD10.1016/j.actamat.2024.120290 ↗
36. DDRX and CDRX of an as-cast nickel-based superalloy during hot compression at γ′ sub-/super-solvus temperatures10.1016/j.jallcom.2019.06.202 ↗
37. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
38. Effect of subgrain and the associated DRX behaviour on the texture modification of Mg-6.63Zn-0.56Zr alloy during hot tensile deformation
39. Texture weakening and ductility variation of Mg-2Zn alloy with CA or RE addition10.1016/j.msea.2015.08.025 ↗
40. Enhanced mechanical properties in fine-grained Mg–1.0Zn–0.5Ca alloys prepared by extrusion at different temperatures10.1016/j.scriptamat.2010.07.038 ↗
41. Mechanochemical characteristics of Ca-added Mg-based alloys: a multimodality approach10.1016/j.matchar.2020.110475 ↗
42. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
43. Ca Addition effects on the microstructure, tensile and corrosion properties of Mg matrix alloy containing 8 wt% Mg2Si10.1007/s11665-017-3121-9 ↗
44. Processing parameter control of lifetime-limiting failure mechanisms in Al-Si cast alloys at room and elevated temperatures10.1007/s11663-018-1370-0 ↗
45. Strontium in Al-Si-Mg Alloy: A Review10.1007/s12540-021-01054-y ↗
46. Hot deformation behaviour and microstructure evolution of Al-3%Mg2Si alloy10.1016/j.matchar.2021.111623 ↗
47. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
48. On the thermal stability of grain boundaries in cast Mg-Y alloys and its influences to mechanical properties at room and elevated temperatures
49. Superior strength-ductility synergy of Mg-Nd-Zn-Zr alloy rod achieved by drawing at elevated temperatures10.1016/j.ijplas.2024.103944 ↗
50. Strength and ductility optimization of Mg-Y-Nd-Zr alloy by microstructural design10.1016/j.ijplas.2014.11.003 ↗
51. Superior elevated-temperature strength of Mg-Y-Sn alloys with thermostable multi-scale precipitates and grain structure
52. Effects of volume fraction of fine grains on the tensile creep properties of a hot-deformed Mg-Gd-Y-Zr alloy
53. High ductility induced by un-DRXed grains in a Mg-Zn-Mn-La-Ce alloy10.1007/s10853-019-03624-3 ↗
54. Deformation behavior of ultra-strong and ductile Mg-Gd-Y-Zn-Zr alloy with bimodal microstructure10.1007/s11661-018-4507-5 ↗
55. Creep-resistant magnesium alloys10.1016/S0921-5093(01)01290-4 ↗
56. Tensile properties of hot rolled AZ31 Mg alloy sheets at elevated temperatures10.1016/j.jallcom.2003.11.173 ↗
57. Creep behavior and deformation microstructures of Mg–Y alloys at 550 K10.1016/S0921-5093(98)00662-5 ↗