journal article·2023-07

Separator modification by MoxC/N-doped graphene enabling polysulfide catalytic conversion for high-performance Li–S batteries

Xiyun Yang, Jiamin Liu, Fulu Chu, Jie Lei, Feixiang Wu

Publisher page

Abstract

The shuttle effect and sluggish electrochemical conversion of polysulfides have been believed to strongly influence the performances of lithium-sulfur (Li–S) batteries. Herein, we propose the synthesis of nanosized MoxC electrocatalysts embedded on N-doped graphene and develop its application for separator modification of Li–S batteries. The N-doped graphene provides a two-dimension conductive barrier layer to chemically adsorb polysulfides and inhibit polysulfides diffusion, while MoxC nanoparticles could serve as the functional electrocatalyst to facilitate the redox kinetics of the multiphase conversion. The Li–S coin cells with MoxC@N-rGO-modified separator can exhibit good long-term cycling stability with a capacity decay of 0.069% per cycle after 400 cycles at 0.5C and excellent rate performance with a discharge capacity of 653 mAh/g at 4C. An area capacity of 4.5 mAh/cm2 is also achieved with a high sulfur loading of 5.2 mg/cm2 and a low electrolyte/sulfur ratio of ∼5 μL/mg.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Advanced chemical strategies for lithium-sulfur batteries: a review10.1016/j.gee.2017.08.002 ↗
2. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
3. In situ structural evolutions of sulfur-limonene polysulfides encapsulated in yeast-derived porous N-doped carbon spheres for high-performance Li-S batteries
4. A comprehensive review of materials with catalytic effects in Li-S batteries: enhanced redox kinetics10.1002/ange.201902413 ↗
5. Challenges and prospects of lithium-sulfur batteries10.1021/ar300179v ↗
6. Molecularly imprinted polymer enables high-efficiency recognition and trapping lithium polysulfides for stable lithium sulfur battery10.1021/acs.nanolett.7b02332 ↗
7. Carbon/sulfur aerogel with adequate mesoporous channels as robust polysulfide confinement matrix for highly stable lithium-sulfur battery10.1021/acs.nanolett.0c03203 ↗
8. High sulfur loading and shuttle inhibition of advanced sulfur cathode enabled by graphene network skin and N, P, F-doped mesoporous carbon interfaces for ultra-stable lithium sulfur battery10.26599/NRE.2023.9120049 ↗
9. Boosting high-performance in lithium-sulfur batteries via dilute electrolyte10.1021/acs.nanolett.0c01778 ↗
10. Low concentration electrolyte enabling cryogenic lithium-sulfur batteries10.1002/adfm.202205393 ↗
11. Flexible carbon nanotube modified separator for high-performance lithium-sulfur batteries10.3390/nano7080196 ↗
12. Understanding the catalytic kinetics of polysulfide redox reactions on transition metal compounds in Li-S batteries10.1021/acsnano.2c08581 ↗
13. A multifunctional SnO2-nanowires/carbon composite interlayer for high-performance lithium-sulfur batteries10.1016/j.cej.2020.126042 ↗
14. Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer10.1038/ncomms2163 ↗
15. From filter paper to carbon paper and toward Li-S battery interlayer10.1016/j.matlet.2014.01.151 ↗
16. Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium-sulfur battery10.1016/j.jpowsour.2013.05.063 ↗
17. A review on separators for lithium-sulfur battery: progress and prospects10.1016/j.jpowsour.2016.09.044 ↗
18. Reactivation of dissolved polysulfides in Li-S batteries based on atomic layer deposition of Al2O3 in nanoporous carbon cloth10.1016/j.nanoen.2013.05.003 ↗
19. Facile synthesis of TiN nanocrystals/graphene hybrid to chemically suppress the shuttle effect for lithium-sulfur batteries10.1016/j.jallcom.2020.153751 ↗
20. Novel interlayer made from Fe3C/carbon nanofiber webs for high performance lithium-sulfur batteries10.1016/j.jpowsour.2015.02.140 ↗
21. CoS-interposed and Ketjen black-embedded carbon nanofiber framework as a separator modulation for high performance Li-S batteries10.1016/j.cej.2019.03.034 ↗
22. Surface/interface structure and chemistry of lithium-sulfur batteries: from density functional theory calculations' perspective10.1002/aesr.202100007 ↗
23. Modulating the electronic structure of nanomaterials to enhance polysulfides confinement for advanced lithium-sulfur batteries10.1039/D1TA02741G ↗
24. Twinborn TiO2-TiN heterostructures enabling smooth trapping-diffusion-conversion of polysulfides towards ultralong life lithium-sulfur batteries10.1039/C7EE01430A ↗
25. Synergistic adsorption-electrocatalysis of Mo-MoB heterostructures for lithium-sulfur batteries10.1021/acsaem.2c02440 ↗
26. A MoO3/MoO2-CP self-supporting heterostructure for modification of lithium-sulfur batteries10.1039/D0TA01664K ↗
27. Construction of nanoporous Mo2C shell/MoO3 core composite by converting MoO3 and its superior performance in lithium sulfur battery10.1016/j.jelechem.2022.116742 ↗
28. MoN supported on graphene as a bifunctional interlayer for advanced Li-S batteries10.1002/aenm.201901940 ↗
29. Covalent coupled sulfur-deficient MoS2 nanosheets on carbon nanotubes toward polysulfide catalytic conversion in a lithium sulfur battery10.1021/acssuschemeng.2c05699 ↗
30. Necklace-like MoC sulfiphilic sites embedded in interconnected carbon networks for Li-S batteries with high sulfur loading10.1039/C9TA00741E ↗
31. Enhancing polysulfide confinement and conversion in meso-/microporous core-shelled MoC/NC microspheres for lithium-sulfur batteries10.1039/D1TA06863F ↗
32. Decorating ketjen black with ultra-small Mo2C nanoparticles to enhance polysulfides chemisorption and redox kinetics for lithium-sulfur batteries10.1016/j.jechem.2020.04.008 ↗
33. Boosting catalytic activity by seeding nanocatalysts onto interlayers to inhibit polysulfide shuttling in Li-S batteries10.1002/adfm.202101980 ↗
34. Operando UV/vis spectroscopy providing insights into the sulfur and polysulfide dissolution in magnesium-sulfur batteries10.1021/acsenergylett.1c02152 ↗
35. A highly efficient polysulfide mediator for lithium-sulfur batteries10.1038/ncomms6682 ↗
36. Three-dimensionally ordered macro-microporous metal organic frameworks with strong sulfur immobilization and catalyzation for high-performance lithium-sulfur batteries10.1016/j.nanoen.2020.104685 ↗
37. Synergistic capture and conversion of polysulfides in cathode composites with multidimensional framework structures10.1016/j.jcis.2022.05.118 ↗
38. All-in-one sulfur host: smart controls of architecture and composition for accelerated liquid-solid redox conversion in lithium-sulfur batteries10.1021/acsami.1c10612 ↗
39. Low loading of RhxP and RuP on N, P codoped carbon as two trifunctional electrocatalysts for the oxygen and hydrogen electrode reactions
40. Sub-50 nm iron-nitrogen-doped hollow carbon sphere-encapsulated iron carbide nanoparticles as efficient oxygen reduction catalysts10.1002/advs.201800120 ↗
41. Interfacial lithium-nitrogen bond catalyzes sulfide oxidation reactions in high-loading Li2S cathode
42. Molybdenum carbide nanostructures for electrocatalytic polysulfide conversion in lithium-polysulfide batteries10.1039/C9NH00618D ↗
43. More reliable lithium-sulfur batteries: status, solutions and prospects10.1002/adma.201606823 ↗
44. The importance of confined sulfur nanodomains and adjoining electron conductive pathways in subreaction regimes of Li-S batteries10.1002/aenm.201700074 ↗
45. Crepe cake structured layered double hydroxide/sulfur/graphene as a positive electrode material for Li-S batteries10.1021/acsnano.0c01694 ↗
46. Sulfur reduction catalyst design inspired by elemental periodic expansion concept for lithium-sulfur batteries10.1021/acsnano.2c00515 ↗
47. Porous carbon nanofiber paper as an effective interlayer for high-performance lithium-sulfur batteries10.1016/j.electacta.2015.04.055 ↗