journal article·2023-12

Mitigating the P2–O2 phase transition of Ni–Co–Mn based layered oxide for improved sodium-ion batteries via interlayered structural modulation

Suyoon Eom, Su Hwan Jeong, Sang Jun Lee, Young Hwa Jung, Joo-Hyung Kim

Publisher page

Abstract

Mn-based layered oxides are promising cathode materials for sodium-ion batteries owing to their high reversible capacities. However, P2–O2 phase transition and Jahn–Teller distortion of Mn3+ frequently occur at the end of the discharging process, resulting in low cycling stability and severe capacity degradation during the cycling processes. In this study, we proposed an effective strategy to inhibit the harmful phase transition and suppress the Jahn–Teller distortion using Al substitution. The proposed method was validated via in situ and ex situ X-ray diffraction. Furthermore, the Al-substituted P2-Na0.7Ni0.2Co0.2Mn0.58Al0.02O2(NCMA2) electrode exhibited only a topotactic phase transition from P2 to OP4 and excellent cycling stability (80% retention of the initial capacity at 170 mAh/g after 50 cycles at 0.1 C within 1.50–4.50 V). X-ray photoelectron spectroscopy analysis showed that the Mn4+ content of the Al-substituted electrode was higher than the bare NCM (Na0.7Ni0.2Co0.2Mn0.6O2) electrode in both the charge and discharge states. This confirms that Al substitution can improve the electrochemical performance by mitigating the irreversible P2–O2 phase transition and suppressing Jahn–Teller distortion. This study provides a new perspective for effectively mitigating the P2–O2 phase transition in Mn-based layered oxide cathodes via interlayered structural modulation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Current collectors for flexible lithium ion batteries: a review of materials10.33961/JECST.2015.6.1.1 ↗
2. Research development on sodium-ion batteries10.1021/cr500192f ↗
3. Novel P2-type layered medium-entropy ceramics oxide as cathode material for sodium-ion batteries10.1007/s40145-021-0524-8 ↗
4. Sodium-ion batteries: from academic research to practical commercialization10.1002/aenm.201701428 ↗
5. Recent advances and perspectives on the polymer electrolytes for sodium/potassium-ion batteries10.1002/smll.202006627 ↗
6. Advanced anode materials for sodium-ion batteries: confining polyoxometalates in flexible metal-organic frameworks by the ‘Breathing Effect’10.1021/acsami.2c04077 ↗
7. Recent advances and prospects of layered transition metal oxide cathodes for sodium-ion batteries10.1016/j.ensm.2020.04.040 ↗
8. A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries10.1039/C4EE03192J ↗
9. Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance
10. Dual-strategy of cation-doping and nanoengineering enables fast and stable sodium-ion storage in a novel Fe/Mn-based layered oxide cathode
11. P2-type Na2/3Ni1/3Mn2/3O2 as a cathode material with high-rate and long-life for sodium ion storage10.1039/C8TA11927A ↗
12. Structural classification and properties of the layered oxides10.1016/0378-4363(80)90214-4 ↗
13. Manganese based layered oxides with modulated electronic and thermodynamic properties for sodium ion batteries10.1038/s41467-018-07646-4 ↗
14. High performance manganese-based layered oxide cathodes: overcoming the challenges of sodium ion batteries10.1039/C7EE00566K ↗
15. P2-type Na (x)[Fe(1/2)Mn(1/2)]O2 made from earth-abundant elements for rechargeable Na batteries10.1038/nmat3309 ↗
16. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
17. Suppressing the P2-O2 phase transition of Na0.67 Mn0.67 Ni0.33 O2 by magnesium substitution for improved sodium-ion batteries10.1002/anie.201602202 ↗
18. Comprehensive review of P2-type Na2/3Ni1/3Mn2/3O2, a potential cathode for practical application of Na-ion batteries10.1021/acsami.9b03937 ↗
19. Role of lithium doping in P2-Na0.67Ni0.33Mn0.67O2 for sodium-ion batteries10.1021/acs.chemmater.1c00569 ↗
20. Review—Manganese-based P2-type transition metal oxides as sodium-ion battery cathode materials10.1149/2.0201514jes ↗
21. Insights into P2-type layered positive electrodes for sodium batteries: from long- to short-range order10.1021/acsami.9b18109 ↗
22. Review on synthesis methods to obtain LiMn2O4-based cathode materials for Li-ion batteries10.1007/s10008-019-04467-3 ↗
23. Improved electrochemical performance of Na0.67MnO2 through Ni and Mg substitution10.1039/C5TA06361B ↗
24. P2 manganese rich sodium layered oxides: rational stoichiometries for enhanced performance10.1016/j.jpowsour.2018.08.068 ↗
25. Lithium-doping stabilized high-performance P2–Na0.66Li0.18Fe0.12Mn0.7O2 cathode for sodium ion batteries10.1021/jacs.9b01855 ↗
26. P2-type layered Na0.45Ni0.22Co0.11Mn0.66O2 as intercalation host material for lithium and sodium batteries10.1016/j.electacta.2013.02.109 ↗
27. Toward high energy density cathode materials for sodium-ion batteries: investigating the beneficial effect of aluminum doping on the P2-type structure10.1039/C6TA08667E ↗
28. Improved electrochemical performance of Fe-substituted NaNi0.5Mn0.5O2 cathode materials for sodium-ion batteries10.1021/acsami.5b00594 ↗
29. Iron-based layered cathodes for sodium-ion batteries10.1002/batt.202100108 ↗
30. Insights into Ti doping for stabilizing the Na2/3Fe1/3Mn2/3O2 cathode in sodium ion battery10.1016/j.jechem.2022.06.016 ↗
31. Suppressing interlayer-gliding and Jahn-Teller effect in P2-type layered manganese oxide cathode via Mo doping for sodium-ion batteries
32. Facile synthesis of an Al-doped carbon-coated Li4Ti5O12 anode for high-rate lithium-ion batteries10.1039/C6RA11353B ↗
33. Ionic conductivity and air stability of al-doped Li7La3Zr2O12. Sintered in alumina and Pt crucibles10.1021/acsami.5b12186 ↗
34. An in-depth understanding of the effect of aluminum doping in high-nickel cathodes for lithium-ion batteries10.1016/j.ensm.2020.09.015 ↗
35. Suppressing the P2-O2 phase transition of Na0.6 Mn0.67 Ni0.33 O2 by magnesium substitution for improved sodium-ion batteries10.1002/ange.201602202 ↗
36. Al substituted Mn position on Li[Ni0.5Co0.2Mn0.3]O2 for high rates performance of cathode material10.1016/j.vacuum.2021.110168 ↗
37. Electrochemical properties and structural evolution of O3-type layered sodium mixed transition metal oxides with trivalent nickel10.1039/C6TA09220A ↗
38. Oxygen redox activity with small voltage hysteresis in Na0.67Cu0.28Mn0.72O2 for sodium-ion batteries10.1016/j.ensm.2020.03.016 ↗
39. High performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 cathode for sodium-ion batteries10.1002/aenm.201400083 ↗
40. Designing high-performance nanostructured P2-type cathode based on a template-free modified Pechini method for sodium-ion batteries10.1021/acsomega.8b00204 ↗
41. Suppressed P2-P2′ phase transition of Fe/Mn-based layered oxide cathode for high-performance sodium-ion batteries10.1016/j.ensm.2022.06.045 ↗
42. In situ X-ray diffraction study of P2-Na[2/3][Ni[1/3]Mn[2/3]]O[2]10.1149/1.1407247 ↗
43. Systematic XPS studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
44. Revisiting the Na2/3Ni1/3Mn2/3O2 cathode: oxygen redox chemistry and oxygen release suppression10.1021/acscentsci.9b01166 ↗
45. Jahn–Teller assisted Na diffusion for high performance Na ion batteries10.1021/acs.chemmater.6b02440 ↗