Green-light wavelength-selective organic solar cells: module fabrication and crop evaluation towards agrivoltaics
Source abstract
Abstract
Green-light wavelength-selective organic solar cells (GLWS-OSCs) pioneer novel agrivoltaics in greenhouses via transforming solar energy in the green-light region to electricity while simultaneously growing crops by utilizing the transmitted blue and red lights. However, the development of GLWS-OSCs has been stymied due to the limited availability of donors and acceptors. Herein, we investigate the combination of a cost-effective poly(3-hexylthiophene) (P3HT) donor with a fluorinated-naphthobisthiadiazole-based non-fullerene acceptor (FNTz-FA) for GLWS-OSC application. FNTz-FA shows an intense absorption band between 500 and 600 nm and a high level of chemical stability. OSCs based on P3HT and FNTz-FA with an inverted configuration are optimized to show high green-light wavelength-selective absorption and power conversion efficiency in the green-light region. Furthermore, large-scale device fabrication has been considered, leading to the development of 100 and 400 cm 2 scale OSC modules. These modules showed sustained solar cell performance after 180 days. Photosynthetic rate measurements indicate that transmissions by the P3HT:FNTz-FA film show a non-obstructing nature and the advantage of green-light wavelength-selectivity in crop growth. Preliminary investigations on the growth of tomatoes have shown the potential of P3HT:FNTz-FA-based OSCs for agrivoltaics. These results demonstrate that GLWS-OSCs are a valid candidate to realize agrivoltaics in greenhouses for an effective utilization of solar energy. • Green-light wavelength-selective organic solar cells are developed for greenhouses. • Green light is converted to electricity, allowing crops to use blue and red light. • Large-scale solar cell modules based on cost-effective materials are fabricated. • Photosynthetic rate measurements show no interference with strawberry growth. • Tomato growth under indoor light transmitted through the modules shows potential.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · solar cell performance optimization · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Solar photovoltaics is ready to power a sustainable future10.1016/j.joule.2021.03.005 ↗
2. Solar-photovoltaic-power-sharing-based design optimization of distributed energy storage systems for performance improvements10.1016/j.energy.2021.119931 ↗
3. Solar sharing for both food and clean energy production: performance of agrivoltaic systems for corn, a typical shade-intolerant crop10.3390/environments6060065 ↗
4. Technological advancements and research prospects of innovative concentrating agrivoltaics10.1016/j.apenergy.2023.120799 ↗
5. Biological impact of lead from halide perovskites reveals the risk of introducing a safe threshold10.1038/s41467-019-13910-y ↗
6. Pb-based perovskite solar cells and the underlying pollution behind clean energy: dynamic leaching of toxic substances from discarded perovskite solar cells10.1021/acs.jpclett.0c00503 ↗
7. Recent progress in organic solar cells based on non-fullerene acceptors: materials to devices10.1039/D1TA10707K ↗
8. Action spectra for photosynthesis in higher plants
9. Green-light wavelength-selective organic solar cells based on poly(3-hexylthiophene) and naphthobisthiadiazole-containing acceptors toward agrivoltaics10.1021/acssuschemeng.2c06426 ↗
10. Organic photovoltaic greenhouses: a unique application for semi-transparent PV?10.1039/C4EE03132F ↗
11. Visibly transparent organic photovoltaic with improved transparency and absorption based on tandem photonic crystal for greenhouse application10.1364/AO.54.010232 ↗
12. The influence of greenhouse-integrated photovoltaics on crop production10.1016/j.solener.2017.06.044 ↗
13. Spectral engineering of semitransparent polymer solar cells for greenhouse applications
14. Unraveling sunlight by transparent organic semiconductors toward photovoltaic and photosynthesis10.1021/acsnano.8b08577 ↗
15. A review on semitransparent solar cells for agricultural application
16. Chalkias · 2024
17. A 2.20 eV bandgap polymer donor for efficient colorful semitransparent organic solar cells
18. Electron-accepting π-conjugated systems for organic photovoltaics: influence of structural modification on molecular orientation at donor−acceptor interfaces10.1021/acs.chemmater.5b04551 ↗
19. Naphtho[1,2-c:5,6-c']bis[1,2,5]thiadiazole-containing π-conjugated compound: nonfullerene electron acceptor for organic photovoltaics10.1002/adfm.201504153 ↗
20. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
21. Correlation between the dipole moment of nonfullerene acceptors and the active layer morphology of green-solvent-processed P3HT-based organic solar cells10.1021/acssuschemeng.0c07114 ↗
22. Molecular design of a non-fullerene acceptor enables a P3HT-based organic solar cell with 9.46% efficiency10.1039/D0EE01763A ↗
23. Nonfullerene acceptors for P3HT-based organic solar cells10.1039/D1TA03219D ↗
24. Synthesis, properties, and photovoltaic characteristics of fluoranthenedione-containing nonfullrene acceptors for organic solar cells, J. Photopolym
25. Green-light wavelength-selective organic solar cells for agrivoltaics: dependence of wavelength on photosynthetic rate10.1039/D3FD00141E ↗
26. Fluorinated naphtho[1,2-c:5,6-c′]bis[1,2,5] thiadiazole-containing π-conjugated compound: synthesis, properties, and acceptor applications in organic solar cells10.1038/s41427-018-0088-4 ↗
27. Invariant charge carrier dynamics using a non-planar non-fullerene acceptor across multiple processing solvents10.1021/acs.jpcc.4c00708 ↗
28. Exploring the origin of high optical absorption in conjugated polymers10.1038/nmat4645 ↗
29. Stability of polymer solar cells10.1002/adma.201104187 ↗
30. Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend10.1016/j.solmat.2010.03.012 ↗
31. Stability of non-fullerene electron acceptors and their photovoltaic devices
32. Reversible chemical reactivity of non-fullerene acceptors for organic solar cells under acidic and basic environment10.1021/acsaem.9b01591 ↗
33. On the interface reactions and stability of nonfullerene organic solar cells10.1039/D1SC07269B ↗
34. A universal method to produce low–work function electrodes for organic electronics10.1126/science.1218829 ↗
35. Electrostatically self-assembled nonconjugated polyelectrolytes as an ideal interfacial layer for inverted polymer solar cells10.1002/adma.201200594 ↗
36. Influence of substituent groups on chemical reactivity kinetics of nonfullerene acceptors10.1021/acs.jpcc.9b09833 ↗
37. The damaging effects of the acidity in PEDOT:PSS on semiconductor device performance and solutions based on non-acidic alternatives10.1039/C9MH01978B ↗
38. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
39. Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells10.1039/c2jm35646e ↗
40. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
41. UV light protection through TiO2 blocking layers for inverted organic solar cells10.1016/j.solmat.2011.08.004 ↗
42. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells10.1002/adfm.201101915 ↗
43. Tandem GCIB-ToF-SIMS and GCIB-XPS analyses of the 2-mercaptobenzothiazole on brass10.1038/s41529-022-00317-2 ↗
44. P3HT: non-fullerene acceptor based large area, semi-transparent PV modules with power conversion efficiencies of 5%, processed by industrially scalable methods10.1039/C8EE01150H ↗
45. 2012
46. Emergence of highly transparent photovoltaics for distributed applications10.1038/s41560-017-0016-9 ↗
47. Semi-transparent polymer solar cells with 6% PCE, 25% average visible transmittance and a color rendering index close to 100 for power generating window applications10.1039/c2ee22623e ↗
48. Wavelength-selective solar photovoltaic systems: powering greenhouses for plant growth at the food-energy-water nexus10.1002/2016EF000531 ↗
49. Photosynthetic physiology of blue, green, and red light: light intensity effects and underlying mechanisms
50. Effect of different PPFDs and photoperiods on growth and yield of everbearing strawberry ‘Elan’ in plant factory with white LED lighting10.2525/ecb.58.99 ↗