Gram-scale polymer-based thermoelectric module for charging Li-ion batteries
Source abstract
Abstract
Organic thermoelectric devices are promising for charging Li-ion batteries in state-of-art sensors and communication devices. Herein, we report the design and fabrication of a gram-scale polymer-based thermoelectric module prepared by lamination of ultrathin half-dried poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) films with Ni foils. The hot pressing of a half-dried PEDOT/PSS film increases the film electrical conductivity and decreases its contact resistance. Such devices exhibit a power density of 72 μW/cm2 at 100 °C under natural cooling conditions in the absence of a heat sink. A 5 g device is capable of fully charging a commercial Li-ion battery (Nichicon SLB03070LR35) within 2 days. The manufactured organic thermoelectric device can be used instead of a CR2032 coin cell to power commercial sensors of acceleration, geomagnetism, temperature, humidity, atmospheric pressure, and illuminance. The manufactured devices exhibit excellent stability for over 2 months under continuous operation conditions. This work highlights the potential of organic thermoelectric devices for energy harvesting.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Conducting polymers and applications · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Organic thermoelectric materials for energy harvesting and temperature control10.1038/natrevmats.2016.50 ↗
2. Advances in organic thermoelectric materials and devices for smart applications10.1002/smm2.1034 ↗
3. Towards polymer-based organic thermoelectric generators10.1039/c2ee22777k ↗
4. Thermoelectric materials and applications for energy harvesting power generation10.1080/14686996.2018.1530938 ↗
5. Soft organic thermoelectric materials: principles, current state of the art and applications
6. Enhancement of the Seebeck coefficient of organic thermoelectric materials via energy filtering of charge carriers10.31635/ccschem.021.202101069 ↗
7. Flexible thermoelectric materials and devices: from materials to applications10.1016/j.mattod.2021.02.016 ↗
8. Wearable thermoelectric materials and devices for self-powered electronic systems10.1002/adma.202102990 ↗
9. Organic thermoelectrics: materials preparation, performance optimization, and device integration10.1016/j.joule.2018.10.012 ↗
10. Complex thermoelectric materials10.1038/nmat2090 ↗
11. Large-scale integration of flexible materials into rolled and corrugated thermoelectric modules10.1002/app.44208 ↗
12. Design of a polymer thermoelectric generator using radial architecture
13. Interconnect patterns for printed organic thermoelectric devices with large fill factors
14. Solution processed organic thermoelectrics: towards flexible thermoelectric modules10.1039/C4EE03297G ↗
15. Organic pi-type thermoelectric module supported by photolithographic mold: a working hypothesis of sticky thermoelectric materials10.1080/14686996.2018.1487239 ↗
16. Processing and doping of thick polymer active layers for flexible organic thermoelectric modules10.1016/j.orgel.2016.01.007 ↗
17. Textile-based thermoelectric generators and their applications10.1002/eem2.12045 ↗
18. Flexible n-type thermoelectric materials by organic intercalation of layered transition metal dichalcogenide TiS210.1038/nmat4251 ↗
19. Thermoelectric power generation from waste heat
20. Measurement of in-plane thermal conductivity in polymer films10.1063/1.4948447 ↗
21. Thermal conductivity and elastic constants of PEDOT:PSS with high electrical conductivity10.1021/ma502099t ↗
22. Thermoelectric polymers and their elastic aerogels10.1002/adma.201505364 ↗
23. Thermoelectric properties of PEDOT:PSS10.1002/aelm.201800769 ↗
24. Review on the operation of wearable sensors through body heat harvesting based on thermoelectric devices10.1063/5.0049347 ↗
25. A wearable organic photovoltaic-thermoelectric (OPV-TE) hybrid generator to minimize the open-circuit voltage losses of OPV module10.1016/j.nanoen.2021.106775 ↗
26. Wearable and flexible thermoelectrics for energy harvesting10.1557/mrs.2018.8 ↗
27. Elastic conducting polymer composites in thermoelectric modules10.1038/s41467-020-15135-w ↗
28. Foldable thermoelectric materials: improvement of the thermoelectric performance of directly spun CNT webs by individual control of electrical and thermal conductivity10.1021/acsami.6b04485 ↗
29. Fabrication of millimeter thick polymer-based thermoelectric devices by solvent-free printing10.1002/admt.202100473 ↗
30. High-power all-carbon fully printed and wearable SWCNT-based organic thermoelectric generator10.1021/acsami.1c00414 ↗
31. A textile-integrated polymer thermoelectric generator for body heat harvesting10.1002/admt.201800708 ↗
32. Enhanced power output in polymer thermoelectric devices through thermal and electrical impedance matching10.1021/acsaem.9b01342 ↗
33. Parameter analysis of thermoelectric generator/dc-dc converter system with maximum power point tracking10.1016/j.esd.2017.08.005 ↗
34. Effect of DC-DC voltage step-up converter impedance on thermoelectric energy harvester system design strategy10.1016/j.apenergy.2019.02.005 ↗
35. On leakage current measured at high cell voltages in lithium-ion batteries10.1149/2.1341702jes ↗
36. Thermal spin transport and energy conversion10.1016/j.mtphys.2017.05.003 ↗
37. Van der Pauw device used to investigate the thermoelectric power factor10.1063/5.0019005 ↗
38. Heat transfer
39. Reduction of specific contact resistance between the conducting polymer PEDOT:PSS and a metal electrode by addition of a second solvent during film formation and a post-surface treatment10.1016/j.synthmet.2018.11.005 ↗
40. Facile approach to enhance electrical and thermal performance of conducting polymer PEDOT:PSS films via hot pressing10.1021/acsami.1c19397 ↗