journal article·2022-12Open access

Accelerated radiation tolerance testing of Ti-based MAX phases

Matheus A. Tunes, Sean M. Drewry, Jose D. Arregui-Mena, Sezer Picak, Graeme Greaves, Luigi B. Cattini, Stefan Pogatscher, James A. Valdez, Saryu Fensin, Osman El-Atwani, Stephen E. Donnelly, Tarik A. Saleh, Philip D. Edmondson

Abstract

MAX phases have recently attracted significant attention for potential nuclear applications due to their novel properties such as unique hexagonal-compact nanolayered crystal structure, high-machinability due to lower hardness levels than conventional ceramics, and high-chemical inertness. In order for MAX phases to be used in nuclear reactors, two aspects deserve detailed investigations: (i) their phase stability at high-temperatures and (ii) microstructural defect formation and recovery induced by energetic particle irradiation. To date, degradation mechanisms of MAX phases at high-temperatures and following irradiation are largely unexplored fields of research. This work focuses on the evaluation of two Ti-based MAX phases—Ti 2AlC and Ti 3SiC 2—within the context of extreme environments. To accomplish this, a one-of-a-kind comparison between neutron irradiations, performed over a decade of research at the high flux isotope reactor, and heavy-ion irradiations, carried out in situ in a transmission electron microscope, has been conducted. The results show Ti-based MAX phases are prone to accelerated decomposition under the conditions investigated. This questions the hypothesis that MAX phases exhibit high phase stability, especially when used in future nuclear energy systems where energetic particle irradiation is a dominating degradation mechanism.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Kohlenstoffhaltige ternäre verbindungen (h-phase)
2. Kohlenstoffhaltige ternäre Verbindungen (V-Ge-C, Nb-Ga-C, Ta-Ga-C, Ta-Ge-C, Cr-Ga-C und Cr-Ge-C)
3. Die H-Phasen: Ti2CdC, Ti2GaC, Ti2GaN, Ti2InN, Zr2InN und Nb2GaC
4. Die H-Phasen Ti2TlC, Ti2PbC, Nb2InC, Nb2SnC und Ta2GaC
5. Die Kristallstruktur von Ti3SiC2 - ein neuer Komplexcarbid-Typ10.1007/BF00899949 ↗
6. Synthesis and characterization of a remarkable ceramic: Ti3SiC210.1111/j.1151-2916.1996.tb08018.x ↗
7. Room-temperature ductile carbides10.1007/s11661-999-0325-0 ↗
8. The MAX phases: unique new carbide and nitride materials: ternary ceramics turn out to be surprisingly soft and machinable, yet also heat-tolerant, strong and lightweight10.1511/2001.28.334 ↗
9. Barsoum · 2013
10. Elastic and mechanical properties of the max phases10.1146/annurev-matsci-062910-100448 ↗
11. The mn+ 1axn phases: a new class of solids: thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
12. Progress in research and development on max phases: a family of layered ternary compounds10.1179/1743280410Y.0000000001 ↗
13. Processing of MAX phases: from synthesis to applications10.1111/jace.17544 ↗
14. Tunes · 2020
15. A candidate accident tolerant fuel system based on a highly concentrated alloy thin film10.1016/j.mtener.2019.03.004 ↗
16. Helium implantation damage resistance in nanocrystalline w-ta-v-cr high entropy alloys
17. Depth distributions of cavities in advanced ferritic/martensitic and austenitic steels with high helium preimplantation and high damage level
18. Effect of neutron irradiation on select MAX phases10.1016/j.actamat.2014.10.068 ↗
19. Effect of neutron irradiation on defect evolution in Ti3SiC2 and Ti2AlC10.1016/j.jnucmat.2015.10.030 ↗
20. Effects of neutron irradiation of Ti3SiC2 and Ti3AlC2 in the 121–1085C temperature range10.1016/j.jnucmat.2016.11.016 ↗
21. A transmission electron microscopy study of the neutron-irradiation response of Ti-based max phases at high temperatures10.1016/j.actamat.2019.02.046 ↗
22. Radiation tolerance of Mn+1AXn phases, Ti3AlC2 and Ti3SiC210.1016/j.actamat.2010.04.029 ↗
23. XRD investigation of ion irradiated Ti3Si0.90Al0.10C210.1016/j.nimb.2009.11.017 ↗
24. Structural changes induced by heavy ion irradiation in titanium silicon carbide10.1016/j.jnucmat.2010.12.235 ↗
25. Damage tolerance of Ti3SiC2 to high energy iodine irradiation10.1016/j.apsusc.2012.03.022 ↗
26. Accommodation, accumulation, and migration of defects in Ti3SiC2 and Ti3AlC2 MAX phases10.1111/jace.12537 ↗
27. Saturation of irradiation damage in (Ti,Zr)3(Si,Al)C2 compounds10.1016/j.jnucmat.2012.07.042 ↗
28. Radiation resistance and mechanical properties of magnetron-sputtered cr2alc thin films10.1016/j.jnucmat.2019.151742 ↗
29. Heavy ion irradiation damage in zr2alc max phase10.1016/j.jnucmat.2019.05.034 ↗
30. The stability of irradiation-induced defects in Zr3AlC2, Nb4AlC3 and (Zr0.5,Ti0.5)3AlC2 MAX phase-based ceramics10.1016/j.actamat.2019.10.049 ↗
31. In situ He+ irradiation of the double solid solution (Ti0.5,Zr0.5)2(Al0.5,Sn0.5)C MAX phase: defect evolution in the 350–800C temperature range10.1016/j.actamat.2020.116606 ↗
32. Deviating from the pure max phase concept: radiation-tolerant nanostructured dual-phase cr2alc10.1126/sciadv.abf6771 ↗
33. High temperature ion irradiation effects in max phase ceramics10.1016/j.actamat.2015.11.055 ↗
34. Reactive hot pressing, a new ceramic process10.1038/206392c0 ↗
35. Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.510.1007/s11661-006-0243-3 ↗
36. New MAX-phase compounds in the V–Cr–Al–C system10.1111/j.1551-2916.2008.02279.x ↗
37. Reactive hot pressing and properties of Nb2AlC10.1111/j.1551-2916.2009.03187.x ↗
38. High temperature ion irradiation effects in MAX phase ceramics10.1016/j.actamat.2015.11.055 ↗
39. A review of focused ion beam milling techniques for TEM specimen preparation10.1016/S0968-4328(99)00005-0 ↗
40. New microscope and ion accelerators for materials investigations (miami-2) system at the university of huddersfield10.1016/j.nima.2019.03.074 ↗
41. Experimental and DFT investigation of (Cr,Ti)3AlC2 MAX phases stability10.1080/21663831.2016.1222598 ↗
42. Microstructure of Ti3SiC2-based ceramics10.1016/0167-577X(95)00259-6 ↗
43. Porter · 2009
44. The Ti-Al-C system (titanium-aluminum-carbon)10.1361/105497100770340273 ↗
45. Phase relationships in the Ti–Si–C system at high pressures10.1557/JMR.1992.1473 ↗
46. Nuclear applications for ultra-high temperature ceramics and max phases
47. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
48. Gilbert · 2015 · 1
49. Ion irradiation and modification: the role of coupled electronic and nuclear energy dissipation and subsequent nonequilibrium processes in materials10.1063/5.0027462 ↗
50. Coupled electronic and atomic effects on defect evolution in silicon carbide under ion irradiation10.1016/j.cossms.2017.09.003 ↗
51. On the nature of radiation damage in metals10.1063/1.1721810 ↗
52. The effect of electronic energy loss on irradiation-induced grain growth in nanocrystalline oxides10.1039/C4CP00392F ↗
53. Point defect formation in M2AlC MAX phases and their tendency to disorder and amorphize10.1038/s41598-017-10273-6 ↗
54. A computer simulation study of displacement cascades in alpha-titanium10.1080/01418619508236254 ↗
55. Defects in solids
56. Point defect modeling in materials: coupling ab initio and elasticity approaches
57. Self-interstitial defects in hexagonal close packed metals revisited: evidence for low-symmetry configurations in Ti, Zr, and Hf
58. Energetics of point defects in aluminum via orbital-free density functional theory10.1080/14786435.2017.1328139 ↗
59. Nonuniversal structure of point defects in face-centered cubic metals
60. On the effect of dose rate on irradiation hardening of RPV steels10.1080/14786430412331319910 ↗
61. Transmission electron microscopy investigation of the microstructure of Fe-Cr alloys induced by neutron and ion irradiation at 300C10.1016/j.jnucmat.2016.03.002 ↗
62. Thermodynamic and kinetic modeling of Mn-Ni-Si precipitates in low-Cu reactor pressure vessel steels10.1016/j.actamat.2017.07.021 ↗
63. Dose rate dependence of Cr precipitation in an ion-irradiated Fe-18Cr alloy10.1016/j.scriptamat.2017.11.040 ↗
64. Precipitation in Fe-Cu and Fe-Cu-Mn model alloys under irradiation: dose rate effects10.1016/j.actamat.2018.07.017 ↗