journal article·2004Open access

Tensile Deformation Behavior of Ti-Nb-Ta-Zr Biomedical Alloys

Nobuhito Sakaguch, Mitsuo Niinomi, Toshikazu Akahori

MATERIALS TRANSACTIONS· Volume 45· Issue 4

Abstract

The composition of Ti-30Nb-10Ta-5Zr, which is simplified that of the Ti-29Nb-13Ta-4.6Zr alloy developed for biomedical applications, was selected, and then Nb content in the basic composition was varied from 20 to 35%. The deformation mechanisms of such Ti-Nb-Ta-Zr system alloys were investigated by loading-unloading tensile tests and characterizing deformed microstructures. The behavior of unloading and reloading of the stress-strain curves up to strain about 2% of Ti-20Nb-10Ta-5Zr and Ti-25Nb-10Ta-5Zr alloys is similar to that obtained in metastable β type titanium alloys where the stress induced martensite transformation occurs. This indicates that the stress and strain induced martensite transformation occurred in these alloys. Furthermore, the elastic deformation of Ti-30Nb-10Ta-5Zr alloy disobeys Hooke's law. However, the behavior of stress or strain-induced martensite transformation does not recognized in the stress-strain curve up to strain about 2% of this alloy. The main deformation mechanism up to fracture of Ti-20Nb-10Ta-5Zr alloy, Ti-25Nb-10Ta-5Zr alloy and Ti-35Nb-10Ta-5Zr alloy is identified as the deformation - induced martensite transformation of β phase to α″ phase, deformation-induced martensite transformation of β phase to α″ phase and deformation twin, and slip, respectively. The deformation mechanisms for Ti-30Nb-10Ta-5Zr alloy are not explained by slip, deformation twining and deformation-induced martensite transformation. However, the super elastic behavior observed in this alloy is expected to occur without deformation-induced martensite transformation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Production Systems Engineering, Toyohashi University of Technology

References (19)

Show source-provided references
1. 1) M. Geetha, A.K. Singh, K. Muraleedharan, A.K. Gogia and R. Asokamani: J. Alloy Comp. 329 (2001) 264-271.10.1016/S0925-8388(01)01604-8 ↗
2. 2) T. Ahmed, M. Long, J. Slivestri, C. Ruiz and H.J. Rack: Proc. Titanium '95 (Inst. Metals, 1996) pp.1760-1767.
3. 3) D. Kuroda, M. Niinomi, M. Morinaga, Y. Kato and T. Yashiro: Mater. Sci. Eng. A243 (1998) 244-249.10.1016/S0921-5093(97)00808-3 ↗
4. 4) D. Kuroda, M. Niinomi, H. Fukui, A. Suzuki and J. Hasegawa: Tetsu-to-Hagane 86 (2000) 610-616.10.2355/tetsutohagane1955.86.9_610 ↗
5. 5) N. Sakaguchi, M. Niinomi, T. Akahori, T. Saito and T. Furuta: J. Japan Inst. Metals 67 (2003) 681-687.10.2320/jinstmet1952.67.11_681 ↗
6. 6) N. Sakaguchi, M. Niinomi, T. Akahori, T. Saito and T. Furuta: Proc. of Int. Conf. on Advanced Technology in Experimental Mechanics 2003, (The Japan Society of Mechanical Engineering 2003) CD-ROM.
7. 7) N. Sakaguchi, M. Niinomi, T. Akahori, T. Saito and T. Furuta: Abstracts of 104th Spring Meeting of the Japan Institute of Light Metals (2003) pp.75-76.
8. 8) S. Yoshitani, M. Niinomi, D. Kuroda, K. Fukunaga, T. Saito and T. Furuta: Proceedings of 2000 Powder Metallurgy World Congress, (The Japan Society of Powder Metallurgy and the Japan Powder Metallurgy Association, 2000) pp.1085-1088.
9. 9) S. Li, Y. Hao, Y. Cui and M. Niinomi: Mater. Trans. 43 (2002) 2964-2969.10.2320/matertrans.43.2964 ↗
10. 10) S. Hanada, M. Ozeki and O. Izumi: Metall. Trans. A 16A (1985) 789-795.10.1007/BF02814829 ↗
11. 11) T. Grosdidier and M.J. Philippe: Mater. Sci. Eng. A291 (2000) 218-223.10.1016/S0921-5093(00)00921-7 ↗
12. 12) T. Grosdidier, Y. Combres, E. Gautier and M.J. Philippe: Metall. Mater. Trans. A 31A (2000) 1095-1106.10.1007/s11661-000-0105-3 ↗
13. 13) E. Takahashi, S. Watanabe and S. Hanada: Collected Abstracts of the 2003 Spring Meeting of the Japan Inst. Metals (2003) pp.135.
14. 14) T. Maejima, T. Eto, H. Uchiyama, K. Yamauchi and M. Nishida: Collected Abstracts of the 2003 Spring Meeting of the Japan Inst. Metals (2003) pp.134.
15. 15) T. Maejima, T. Eto, H. Uchiyama, K. Yamauchi and M. Nishida: Collected Abstracts of the 2003 Spring Meeting of the Japan Inst. Metals (2003) pp.135.
16. 16) K. Ikeda, A. Sugimoto, Y. Shintaklu and M. Niimomi: Abstracts of 104th Spring Meeting of the Japan Institute of Light Metals (2003) pp.409-410.
17. 17) M. Oka and Y. Taniguchi: J. Japan Inst. Metals 42 (1978) 814-820.10.2320/jinstmet1952.42.8_814 ↗
18. 18) M. Hida, E. Sukedai, Y. Yokohari and A. Nakagawa: J. Japan Inst. Metals 44 (1980) 436-442.10.2320/jinstmet1952.44.4_436 ↗
19. 19) Y. Ohmori, T. Ogo, K. Nakai and S. Kobayashi: Mater. Sci. Eng. A321 (2001) 182-188.10.1016/S0921-5093(00)01891-8 ↗