Structure and Transport Properties of (Bi1-xSbx)2Te3 Thermoelectric Materials Prepared by Mechanical Alloying and Pulse Discharge Sintering
Source abstract
Abstract
Mechanical alloying followed by pulse discharge sintering (MA-PDS) has been employed to develop the bulk (Bi1−xSbx)2Te3 thermoelectric materials with various Sb alloying contents. Substitutional solid solutions of (Bi1−xSbx)2Te3 are formed in the whole Sb content range by MA-PDS process. The sintered compacts are dense and have refined microstructures. Systematic investigations on the electrical, thermal and thermoelectric properties reveal that the transport properties of the obtained (Bi1−xSbx)2Te3 samples are quite sensitive to the Sb alloying content. At room temperature, the samples with x<0.57 exhibit n-type semi-conduction. However, at x>0.57, the samples become p-type. The pure constituents of Bi2Te3 and Sb2Te3 as well as the Sb-poor, n-type samples exhibit the room-temperature figure of merit of the order of 1.0×10−3 K−1. High values of figure of merit have been obtained in the Sb-rich, p-type samples. The maximum value of 3.35×10−3 K−1 is attained at x=0.80, which corresponds to the carrier concentration and Hall mobility of 1.95×1019 cm−3 and 207 cm2/Vs, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Institute of Advanced Industrial Science and Technology (AIST Tohoku)
References (17)
Show source-provided references
1. 1) M. Stordeur and H. Sobotta: Proc. First European Conf. on Thermoelectrics, ed. by D. M. Rowe (Peregrinus Ltd., London, 1988) pp. 209–212.
2. 2) H. Scherrer and S. Scherrer: CRC Handbook of Thermoelectrics, ed. by D. M. Rowe (CRC Press, Inc., 1995) pp. 211–255.
3. 3) C. Wood: Energy Convers. Mgmt. 24 (1984) 317–322.10.1016/0196-8904(84)90012-8 ↗
4. 4) T. S. Oh, D. B. Hyun and N. V. Kolomoets: Scr. Mater. 42 (2000) 849–854.10.1016/S1359-6462(00)00302-X ↗
5. 5) J. Yang, T. Aizawa, A. Yamamoto and T. Ohta: J. Alloys Comp. 309 (2000) 225–228.10.1016/S0925-8388(00)01063-X ↗
6. 6) H. C. Kim, T. S. Oh and D. B. Hyun: J. Phys. Chem. Solids 61 (2000) 743–747.10.1016/S0022-3697(99)00269-3 ↗
7. 7) X. D. Liu and Y. H. Park: Mater. Trans. 43 (2002) 30–35.10.2320/matertrans.43.30 ↗
8. 8) A. Giani, A. Boulouz, F. Pascal-Delannoy, A. Foucaran and A. Boyer: Thin Solid Films 315 (1998) 99–103.10.1016/S0040-6090(97)00792-X ↗
9. 9) S. Cho, Y. Kim, A. Divenere, G. K. Wong and J. B. Ketterson: J. Appl. Phys. 75 (1999) 1401–1404.10.1063/1.124707 ↗
10. 10) T. C. Harman, S. E. Miller and H. L. Goeing: Bull. Am. Phys. Soc. 30 (1955) 35–41.
11. 11) J. Horak, L. Tichy, P. Lostak and A. Vasko: Cryst. Lattice Defects 6 (1976) 223–228.
12. 12) J. M. Schultz, J. P. McHugh and W. A. Tiller: J. Appl. Phys. 33 (1962) 2443–2447.10.1063/1.1728990 ↗
13. 13) D. M. Gel’fgat and Z. M. Dashevskii: Inorg. Mater. 19 (1984) 1172–1175.
14. 14) B. Y. Jung, T. S. Oh, D. B. Hyun and J. D. Shim: J. Kor. Phys. Soc. 31 (1997) 219–223.
15. 15) R. D. Barnard: Thermoelectricity in Metals and Alloys, (Taylor & Francis, London, 1972) pp. 102–112.
16. 16) J. Seo, K. Park, D. Lee and C. Lee: Scr. Mater. 38 (1998) 477–481.10.1016/S1359-6462(97)00463-6 ↗
17. 17) M. Stordeur: CRC Handbook of Thermoelectrics, ed. D. M. Rowe (CRC Press, Inc., 1995) pp. 239–255.