journal article·2009Open access

Evolution of Mechanical Properties and Microstructure in Extruded Mg96Zn2Y2 Alloys by Annealing

Masafumi Noda, Tsuyoshi Mayama, Yoshihito Kawamura

MATERIALS TRANSACTIONS· Volume 50· Issue 11

Abstract

Mg96Zn2Y2 alloy with a long period stacking ordered (LPSO) phase was produced by extrusion, and the effects of annealing on its microstructure and mechanical properties were investigated. Annealing at temperatures up to 623 K improved the elongation of the alloy from 5.4 to 9.6% but caused no changes in yield stress and tensile strength, respectively, because the LPSO phase prevented grain growth, the α-Mg phase maintained a fine grain size, kink deformation remained in the LPSO phase, and the Mg3Zn3Y2 phases finely dispersed. When the alloy was annealed at 773 K, the α-Mg and Mg3Zn3Y2 phases became coarse, which reduced the yield stress and tensile strength, respectively, while the elongation improved to 23%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Kumamoto Technology and Industry Foundation

Department of Materials Science, Kumamoto University

References (28)

Show source-provided references
1. 1) H. Friedrich and S. Schumann: J. Mater. Process. Technol. 117 (2001) 276–281.10.1016/S0924-0136(01)00780-4 ↗
2. 2) A. Luo and M. O. Peguleryuz: J. Mater. Sci. 29 (1994) 5259–5271.10.1007/BF01171534 ↗
3. 3) M. Noda, H. Shimizu, K. Funami and H. Mori: Mater. Sci. Forum 551–552 (2007) 225–230.10.4028/www.scientific.net/MSF.551-552.225 ↗
4. 4) Y. Chino, H. Iwahashi and M. Mabuchi: Mater. Sci. Eng. A 466 (2007) 90–95.10.1016/j.msea.2007.02.027 ↗
5. 5) L. W. F. Mackenzie, B. Davis, F. J. Hamphreys and G. W. Lorimer: Mater. Sci. Technol. 23 (2007) 1173–1180.10.1179/174328407X226509 ↗
6. 6) M. T. Perez-Prado and O. A. Ruano: Scr. Mater. 46 (2002) 149–155.10.1016/S1359-6462(01)01212-X ↗
7. 7) Y. Kawamura and M. Yamasaki: Mater. Trans. 48 (2007) 2986–2992.10.2320/matertrans.MER2007142 ↗
8. 8) S. Yoshimoto, M. Yamasaki and Y. Kawamura: Mater. Trans. 47 (2006) 959–965.10.2320/matertrans.47.959 ↗
9. 9) H. Watanabe, T. Mukai, S. Kamado, Y. Kojima and K. Higashi: Mater. Trans. 44 (2003) 463–467.10.2320/matertrans.44.463 ↗
10. 10) X. Yung, H. Miura and T. Sakai: Mater. Trans. 44 (2003) 197–203.10.2320/matertrans.44.197 ↗
11. 11) E. Abe, Y. Kawamura, K. Hayashi and A. Inoue: Acta Mater. 50 (2002) 3845–3857.10.1016/S1359-6454(02)00191-X ↗
12. 12) T. Morikawa, K. Kaneko, K. Higashida, D. Kinoshita, M. Takenaka and Y. Kawamura: Mater. Trans. 49 (2008) 1294–1297.10.2320/matertrans.MC2007110 ↗
13. 13) R. Cottam, J. Robson, G. Lorimer and B. Davis: Mater. Sci. Eng. A 485 (2008) 375–382.10.1016/j.msea.2007.08.016 ↗
14. 14) J. Y. Lee, D. H. Kim, H. K. Lim and D. H. Kim: Mater. Lett. 59 (2005) 3801–3805.10.1016/j.matlet.2005.06.052 ↗
15. 15) X. Zeng, Y. Zhang, C. Lu, W. Ding, Y. Wang and Y. Zhu: J. Alloy. Compd. 395 (2005) 213–219.10.1016/j.jallcom.2004.10.070 ↗
16. 16) D. H. Kim, Y. Kim and I. J. Kim: Mater. Lett. 60 (2006) 2190–2193.10.1016/j.matlet.2005.12.096 ↗
17. 17) M. Yamasaki, T. Annan, S. Yoshimoto and Y. Kawamura: Scr. Mater. 53 (2005) 799–803.10.1016/j.scriptamat.2005.06.006 ↗
18. 18) G. Yuan, Y. Liu, W. Ding and C. Lu: Mater. Sci. Eng. A 474 (2008) 348–354.10.1016/j.msea.2007.04.017 ↗
19. 19) Y. Yoshida, L. Cisar, S. Kamado and Y. Kojima: Mater. Trans. 44 (2003) 468–475.10.2320/matertrans.44.468 ↗
20. 20) C. W. Su, L. Lu and M. O. Lai: Mater. Sci. Technol. 23 (2007) 290–296.10.1179/174328407X161132 ↗
21. 21) M. Noda, M. Hirohashi, K. Funami, Y. Suwahara and M. Kobayashi: J. Japan Inst. Metals 66 (2003) 101–108.10.2320/jinstmet1952.66.2_101 ↗
22. 22) T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A 490 (2008) 411–420.10.1016/j.msea.2008.02.004 ↗
23. 23) L. Jin, D. Lin, D. Mao, X. Zeng and W. Ding: J. Alloy. Compd. 426 (2006) 148–154.10.1016/j.jallcom.2006.02.018 ↗
24. 24) J. Y. Lee, H. K. Lim, D. H. Kim, W. T. Kim and D. H. Kim: Mater. Sci. Eng. A 491 (2008) 349–355.10.1016/j.msea.2008.02.010 ↗
25. 25) K. Higashida, J. Takamura and N. Narita: Mater. Sci. Eng. 81 (1986) 239–258.10.1016/0025-5416(86)90266-1 ↗
26. 26) F. Inoko and K. Kashihara: J. Japan Inst. Metals 56 (1992) 361–370.10.2320/jinstmet1952.56.4_361 ↗
27. 27) T. Itoi, T. Seimiya, Y. Kawamura and M. Hirohashi: Scr. Mater. 51 (2004) 107–111.10.1016/j.scriptamat.2004.04.003 ↗
28. 28) D. K. Xu, L. Liu, Y. B. Xu and E. H. Han: Mater. Sci. Eng. A 420 (2006) 322–332.10.1016/j.msea.2006.01.092 ↗