Thermal Diffusivities and Conductivities of Molten Germanium and Silicon
Source abstract
Abstract
Thermal diffusivity values of molten germanium and silicon were measured by a laser flash method. Simple but useful sample cell systems were developed to keep the molten germanium and silicon shape uniform for a given thickness. In the present experimental condition, it is necessary to consider the effect of not only the radiative heat loss but also the conductive heat loss at the interface between the molten sample and the cell material under the present experimental conditions. However, the computer simulation results suggest that the conductive heat loss is found to be negligibly small. The thermal diffusivity values of molten germanium and silicon are given in the following equations (unit: m2/s). 2α_Ge & =1.40×10^-8(T-1218)+2.29×10^-5 & & 1218≤T≤1398 (unit: K)α_Si & =4.48×10^-9(T-1685)+2.23×10^-5 & & 1685≤T≤1705 (unit: K)
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal properties of materials · Thermography and Photoacoustic Techniques · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School, Department of Materials Processing, Tohoku University
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
Department of Materials Science, Ibaraki University
References (17)
Show source-provided references
1. 1) E. Yamasue, M. Susa, H. Fukuyama and K. Nagata: J. Crys. Growth. 234 (2002) 121–131.10.1016/S0022-0248(01)01673-6 ↗
2. 2) H. Nagai, Y. Nakata, T. Tsurue, H. Minagawa, K. Kamada, S. E. Gustafsson and T. Okutani: Jpn. J. Appl. Phys. 39 (2000) 1405–1408.10.1143/JJAP.39.1405 ↗
3. 3) E. Takasuka, E. Tokizaki, K. Terashima and S. Kimura: The Fourth Asian Thermophysical Properties Conference (Tokyo, September 1995) pp. 89–92.
4. 4) E. Takasuka, E. Tokizaki, K. Terashima and S. Kimura: Netsu Bussei 9 (1995) 169–174.10.2963/jjtp.9.169 ↗
5. 5) K. Yamamoto, T. Abe and S. Takasu: Jpn. J. Appl. Phys. 30 (1991) 2423–2426.10.1143/JJAP.30.2423 ↗
6. 6) S. Kimura and K. Terashima: J. Crys. Growth. 180 (1997) 323–333.10.1016/S0022-0248(97)00263-7 ↗
7. 7) W. J. Parker, R. J. Jenkins, C. P. Butler and G. L. Abbott: J. Appl. Phys. 32 (1961) 1679–1684.10.1063/1.1728417 ↗
8. 8) T.Nishi, H.Shibata, H.Ohta and Y.Waseda: Metall. Trans. A 34A (2003) in press.10.1007/s11661-003-0181-2 ↗
9. 9) T.Nishi, H.Ohta, H.Shibata and Y.Waseda: Int. J. Thermophys. 24 (2003) 1735–1751.10.1023/B:IJOT.0000004102.55688.c7 ↗
10. 10) Y. Takahashi, T. Azumi and M. Sugano: Netsu-Sokutei 8 (1981) 62–66.
11. 11) H.Ohta and Y.Waseda: High. Temp. Mat. Proc. 7 (1986) 179–184.10.1515/HTMP.1986.7.2-3.179 ↗
12. 12) H.Ohta, T.Baba, H.Shibata and Y.Waseda: Int. J. Thermophys. 23 (2002) 1659–1668.10.1023/A:1020702320037 ↗
13. 13) P. Sommelet and R. J. Orr: J. Chem. Eng. Data 11 (1966) 64–65.10.1021/je60028a018 ↗
14. 14) P. B. Kantor, O. M. Kisel and E. M. Fomichev: Ukrain. Fiz. Zh. 5 (1960) 358.
15. 15) V. M. Glazov, S. N. Chizhevskaya and N. N. Glagoleva; Liquid Semiconductors, (Plenum Press, New York 1969) pp.60, 61, 69.10.1007/978-1-4899-6451-9 ↗
16. 16) L. P. Filippov: Int. J. Heat Mass Transfer 16 (1973) 665–885.10.1016/0017-9310(73)90029-X ↗
17. 17) K.C.Mills, B.J.Monaghan and B.J.Keene: Int. Mater. Rev. 41 (1996) 209–242.10.1179/imr.1996.41.6.209 ↗