Glass-Forming Ability and Thermal Stability of Ti–Zr–Cu–Pd–Si Bulk Glassy Alloys for Biomedical Applications
Source abstract
Abstract
The thermal properties, glass forming ability (GFA) and mechanical properties of a series of Ti40Zr10Cu40−xPd10Six (x=0, 1, 2) bulk glassy alloys were examined by differential scanning calorimetry (DSC), differential thermal analysis (DTA), X-ray diffractometry (XRD) and compression test. The bulk glassy alloys are expected to be used as biomedical materials because of the absence of toxic elements such as Ni, Al and Be. The glass-forming ability and thermal stability of the Ti–Zr–Cu–Pd alloy can be improved by a small amount of Si addition. The critical diameters for glass formation are 5 mm for both Ti40Zr10Cu39Pd10Si1 and Ti40Zr10Cu38Pd10Si2 alloys. A large supercooled liquid region of 65 K was obtained for the Ti40Zr10Cu38Pd10Si2 bulk glassy alloy. The bulk glassy alloys have higher compressive strength of over 1900 MPa and lower Young’s modulus below 85 GPa as compared with conventional biomedical Ti alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Materials Research, Tohoku University
References (23)
Show source-provided references
1. 1) A. Inoue, T. Zhang and T. Masumoto: Mater. Trans. JIM 31 (1990) 177–183.10.2320/matertrans1989.31.177 ↗
2. 2) T. Zhang, A. Inoue and T. Masumoto: Mater. Trans. JIM 32 (1991) 1005–1010.10.2320/matertrans1989.32.1005 ↗
3. 3) H. Kakiuchi, A. Inoue, M. Onuki, Y. Takano and T. Yamaguchi: Mater. Trans. 42 (2001) 678–681.10.2320/matertrans.42.678 ↗
4. 4) F. X. Qin, H. F. Zhang, Y. F. Deng, B. Z. Ding and Z. Q. Hu: J. Alloy. Compd. 375 (2004) 318–323.10.1016/j.jallcom.2003.12.004 ↗
5. 5) A. Inoue: Acta Mater. 48 (2000) 279–306.10.1016/S1359-6454(99)00300-6 ↗
6. 6) T. Zhang, A. Inoue and T. Masumoto: Mater. Sci. Eng. A 181–182 (1994) 1423–1426.10.1016/0921-5093(94)90877-X ↗
7. 7) A. Inoue, N. Nishiyama, K. Amiyam, T. Zhang and T. Masumoto: Mater. Lett. 19 (1994) 131–135.10.1016/0167-577X(94)90057-4 ↗
8. 8) T. Zhang and A. Inoue: Mater. Trans. JIM 39 (1998) 1001–1006.10.2320/matertrans1989.39.1001 ↗
9. 9) H. Men, S. Pang, A. Inoue and T. Zhang: Mater. Trans. 10 (2005) 2218–2220.10.2320/matertrans.46.2218 ↗
10. 10) Y. C. Kim, W. T. Kim and D. H. Kim: Mater. Sci. Eng. A 375–377 (2004) 127–135.10.1016/j.msea.2003.10.115 ↗
11. 11) S. L. Zhu, X. M. Wang, F. X. Qin and A. Inoue: in review.
12. 12) C. L. Ma, H. Soejima, S. Ishihara, K. Amiya, N. Nishiyama and A. Inoue: Mater. Trans. 45 (2004) 3223–3227.10.2320/matertrans.45.3223 ↗
13. 13) M. Hasegawa, M. Takeuchi, H, Kato and A. Inoue: Acta Mater. 52 (2004) 1799–7806.10.1016/j.actamat.2003.12.019 ↗
14. 14) T. Zhang and A. Inoue: Mater. Sci. Eng. A 304–306 (2001) 771–774.10.1016/S0921-5093(00)01592-6 ↗
15. 15) A. Inoue: Mater. Trans. JIM 36 (1995) 866–875.10.2320/matertrans1989.36.866 ↗
16. 16) Z. P. Lu and C. T. Liu: Acta Mater. 50 (2002) 3501–3512.10.1016/S1359-6454(02)00166-0 ↗
17. 17) Q. J. Chen, J. Shen, H. B. Fan, J. F. Sun, Y. J. Huang and D. G. Mccartney: Chin. Phys. Lett. 22 (2005) 1736–1738.10.1088/0256-307X/22/7/048 ↗
18. 18) Z. P. Lu, X. Hu, Y. Li and S. C. Ng: Mater. Sci. Eng. A 304–306 (2001) 679–682.10.1016/S0921-5093(00)01563-X ↗
19. 19) M. X. Xia, C. L. Ma, H. X. Zheng and J. G. Li: Mater. Sci. Eng. A 390 (2005) 372–375.10.1016/j.msea.2004.08.019 ↗
20. 20) W. Z. Liang, J. Shen and J. F. Sun: J. Alloys Compd. 420 (2006) 94–97.10.1016/j.jallcom.2005.10.018 ↗
21. 21) H. Choi-Yim, R. Busch and W. L. Johnson: J. Appl. Phys. 83 (1998) 7993–7997.10.1063/1.367981 ↗
22. 22) C. T. Liu and Z. P. Lu: Intermetallics 13 (2005) 415–418.10.1016/j.intermet.2004.07.034 ↗
23. 23) M. Hasegawa, M. Takeuchi, H. Kato and A. Inoue: Acta Mater. 52 (2004) 1799–1806.10.1016/j.actamat.2003.12.019 ↗