journal article·2012Open access

Influence of Dislocation Separation on Dynamic Strain Aging in a Fe–Mn–C Austenitic Steel

Motomichi Koyama, Takahiro Sawaguchi, Kaneaki Tsuzaki

MATERIALS TRANSACTIONS· Volume 53· Issue 3

Abstract

The influences of deformation temperature and strain rate on the serrated flow behavior of a Fe–17Mn–0.3C alloy with a low stacking fault energy were investigated by the tensile tests in a temperature range of 273 to 523 K. Three regions were found when the deformation temperature was plotted against the critical strains for the onset of serrations. The critical strain decreased in the region of 273 to 323 K, increased in that of 323 to 423 K, and decreased again in that of 423 to 523 K with increasing temperature. The first two regions are well known. However, the third region corresponding to that of high temperature has not been reported, and this region could be interpreted by separately considering the interactions of solute atoms with leading and trailing partials. Since the velocity of the leading partials is assumed to be significantly higher than that of the trailing partials, the critical strains in the first and third regions were concluded to result from trapping the trailing partials and the leading partials, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Science and Engineering, University of Tsukuba

National Institute for Materials Science

References (42)

Show source-provided references
1. 1) I. Tamura, T. Maki and H. Hato: Trans. ISIJ 10 (1970) 163.10.2355/isijinternational1966.10.163 ↗
2. 2) K. S. Chan, L. H. Chen and T. S. Lui: Mater. Trans. 38 (1997) 420–426.10.2320/matertrans1989.38.420 ↗
3. 3) T. H. Blewitt, R. R. Coltman and J. K. Redman: J. Appl. Phys. 28 (1957) 651.10.1063/1.1722824 ↗
4. 4) H. Suzuki and C. S. Barrett: Acta Metall. 6 (1958) 156.10.1016/0001-6160(58)90002-6 ↗
5. 5) Y. N. Dastur and W. C. Leslie: Metall. Trans. A 12A (1981) 749.10.1007/BF02648339 ↗
6. 6) T. Shun, C. M. Wan and J. G. Bryne: Acta Mater. 40 (1992) 3407.10.1016/0956-7151(92)90054-I ↗
7. 7) L. Chen, H. S. Kim, S. K. Kim and B. C. De Cooman: ISIJ Int. 47 (2007) 1804.10.2355/isijinternational.47.1804 ↗
8. 8) D. Canadinc, C. Efstathiou and H. Shitoglu: Scr. Mater. 59 (2008) 1103.10.1016/j.scriptamat.2008.07.027 ↗
9. 9) L. H. de Almeida, I. L. May and P. R. O. Emygdio: Mater. Charact. 41 (1998) 137.10.1016/S1044-5803(98)00031-X ↗
10. 10) R. K. Ham and D. Jaffrey: Philos. Mag. 15 (1967) 247.10.1080/14786436708227697 ↗
11. 11) W. S. Owen and M. Grujicic: Acta Mater. 47 (1999) 111.10.1016/S1359-6454(98)00347-4 ↗
12. 12) S. Allain, P. Cugy, C. Scott, J. P. Chateau, A. Rusinek and A. Deschamps: Int. J. Mater. Res. 99 (2008) 734.10.3139/146.101693 ↗
13. 13) S. M. Copley and B. H. Kear: Acta Metall. 16 (1968) 227.10.1016/0001-6160(68)90118-1 ↗
14. 14) I. Karaman, H. Sehitoglu, K. Gall, Y. I. Chumlyakov and H. J. Mailer: Acta Mater. 48 (2000) 1345.10.1016/S1359-6454(99)00383-3 ↗
15. 15) T. S. Byun: Acta Mater. 51 (2003) 3063.10.1016/S1359-6454(03)00117-4 ↗
16. 16) M. Koyama, T. Sawaguchi and K. Tsuzaki: Mater. Sci. Eng. A 528 (2011) 2882.10.1016/j.msea.2010.12.065 ↗
17. 17) A. Dumay, J. P. Chateau, S. Allain, S. Migot and O. Bouaziz: Mater. Sci. Eng. A 483 (2008) 184.10.1016/j.msea.2006.12.170 ↗
18. 18) L. Remy and A. Pineau: Mater. Sci. Eng. 28 (1977) 99.10.1016/0025-5416(77)90093-3 ↗
19. 19) N. Bergeon, S. Kajiwara and T. Kikuchi: Acta Mater. 48 (2000) 4053.10.1016/S1359-6454(00)00187-7 ↗
20. 20) M. Koyama, T. Sawaguchi, K. Ogawa, T. Kikuchi and M. Murakami: Mater. Trans. 51 (2010) 1194–1199.10.2320/matertrans.M2010073 ↗
21. 21) A. Sato, E. Chishima, Y. Yamaji and T. Mori: Acta Metall. 32 (1984) 539.10.1016/0001-6160(84)90065-8 ↗
22. 22) Y. Nakada and A. S. Ker: Acta Metall. 18 (1970) 437.10.1016/0001-6160(70)90129-X ↗
23. 23) M. Koyama, T. Sawaguchi, T.-K. Lee, C.-S. Lee and K. Tsuzaki: Mater. Sci. Eng. A 24 (2011) 7310.10.1016/j.msea.2011.06.011 ↗
24. 24) B. Hutchinson and N. Ridley: Scr. Mater. 55 (2006) 299.10.1016/j.scriptamat.2006.05.002 ↗
25. 25) L. Remy and A. Pineau: Mater. Sci. Eng. A 28 (1977) 99.10.1016/0025-5416(77)90093-3 ↗
26. 26) L. H. de Almeida, I. L. May and P. R. O. Emygdio: Mater. Charact. 41 (1998) 137.10.1016/S1044-5803(98)00031-X ↗
27. 27) S. G. Hong and S. B. Lee: J. Nucl. Mater. 340 (2005) 307.10.1016/j.jnucmat.2004.12.012 ↗
28. 28) K. Ohnishi and J. Ishizaka: Tetsu to Hagane 14 (1977) 2362.10.2355/tetsutohagane1955.63.14_2362 ↗
29. 29) J. E. King, C. P. You and J. F. Knott: Acta Metall. 29 (1981) 1553.10.1016/0001-6160(81)90037-7 ↗
30. 30) S. Kumar: Scr. Metall. Mater. 33 (1995) 81.10.1016/0956-716X(95)00099-H ↗
31. 31) V. Shankar, M. Valsan, B. B. S. Rao and S. L. Mannan: Metall. Mater. Trans. A 35A (2004) 3129.10.1007/s11661-004-0057-0 ↗
32. 32) K. Gopinath, A. K. Gogia, S. V. Kamat and U. Ramamurty: Acta Mater. 57 (2009) 1243.10.1016/j.actamat.2008.11.005 ↗
33. 33) W. Charnock: Philos. Mag. 20 (1969) 427.10.1080/14786436908228714 ↗
34. 34) H. Schumann: J. Kristall Technik 10 (1974) 1141.10.1002/crat.19740091009 ↗
35. 35) P. Y. Volosevich, V. N. Grindnev and Y. N. Petrov: Phys. Met. Metallogr. 42 (1976) 372.
36. 36) P. H. Adler, G. B. Olson and W. S. Owen: Metall. Trans. A 17 (1986) 1725.10.1007/BF02817271 ↗
37. 37) A. H. Cottrell: Dislocations and Plastic Flow in Crystals, (Oxford University Press, 1953) p. 136.
38. 38) W. G. Johnston and J. J. Gilman: J. Appl. Phys. 30 (1959) 129.10.1063/1.1735121 ↗
39. 39) J. T. Michalak: Acta Metall. 13 (1965) 213.10.1016/0001-6160(65)90198-7 ↗
40. 40) K. Marukawa: J. Phys. Soc. Japan 22 (1967) 499.10.1143/JPSJ.22.499 ↗
41. 41) T. Suzuki and T. Ishii: Proc. Int. Conf. on Strength of Metals and Alloys, (Trans. Japan Inst. Metals, 1967) p. 687.
42. 42) R. W. Rhode and C. H. Pitt: J. Appl. Phys. 38 (1967) 876.10.1063/1.1709428 ↗