journal article·2011Open access

Nucleation Behaviour of β to ω Phase Transformations in β-Type Ti-Mo Alloys

E. Sukedai, M. Shimoda, H. Nishizawa, Y. Nako

MATERIALS TRANSACTIONS· Volume 52· Issue 3

Abstract

Nucleation behaviour of β to ω phase transformations in β-type Ti alloys has been investigated using electron microscopy in four cases; (1) along the {112}〈11\\bar1〉 twin boundary, at which compressive stress occurs, (2) by means of aging under tensile stressing, (3) on the effects on the amounts of quenched-in vacancy in specimens quenched-in from two different temperatures, and (4) due to cooling to 131 K. Results show that the formation of nucleation-sites is enhanced by both compressive-stress along the twin boundary and tensile-stress during aging. In a specimen quenched from a higher temperature, the formation of nucleation-sites increases. It is considered that quenched-in vacancies and their clusters become nucleation-sites of β to ω phase transformations. The phase transformation occurs due to cooling to 131 K. It is also found that the formation of new nucleation-sites cannot be reproduced and that they moved randomly.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Engineering, Okayama University of Science

References (15)

Show source-provided references
1. 1) E. Aeby-Gautier, B. Appolaire, J. Da Costa Teixeira, F. Bruneseaux and S. Denis: Ti-2007 Science and Technology, ed. by M. Niinomi, S. Akiyama, M. Ikeda, M. Hagiwara and K. Maruyama, 1 (Japan Institute of Metals, Sendai, 2007) pp. 195–202.
2. 2) M. Okada: ISIJ Int. 31 (1991) 834–839.10.2355/isijinternational.31.834 ↗
3. 3) Y. Kawabe and S. Muneki: ISIJ Int. 31 (1991) 785–791.10.2355/isijinternational.31.785 ↗
4. 4) T. Horiuchi, E. Sukedai, M. Shimoda and H. Hashimoto: Mater. Trans. JIM 36 (1995) 1455–1462.10.2320/matertrans1989.36.1455 ↗
5. 5) S. Hanada: Bull. Japan Inst. Metals 25 (1986) 755–764.10.2320/materia1962.25.755 ↗
6. 6) H. Nishizawa, E. Sukedai, W. Liu and H. Hashimoto: Mater. Trans. JIM 39 (1998) 609–612.10.2320/matertrans1989.39.609 ↗
7. 7) H. Suzuki: Introduction of dislocation theory, (AGNE, Tokyo, 1989) pp. 194–204.
8. 8) R. Boyer, G. Welsch and E. W. Collings: Materials Properties Handbook: Titanium alloys, (ASM International, Ohio, 1994) pp. 943.
9. 9) Y. K. Vohra, E. S. K. Menon, S. K. Sikka and R. Krishnan: Acta Metall. 29 (1981) 457–470.10.1016/0001-6160(81)90171-1 ↗
10. 10) B. S. Hickman: Trans. Metall. Soc. AIME 245 (1969) 1329–1336.
11. 11) H. Matsumoto, E. Sukedai and H. Hashimoto: J. Japan Inst. Metals 67 (2003) 635–642.10.2320/jinstmet1952.67.11_635 ↗
12. 12) M. Hida and E. Sukedai: J. Japan Inst. Metals 50 (1986) 893–899.10.2320/jinstmet1952.50.10_893 ↗
13. 13) H. Fujii and H. Suzuki: BETA TITANIUM ALLOYS in the 1990’s, ed. by D. Eylon, R. R. Boyer and D. A. Koss, (TMS, Pennsylvania, 1993) pp. 249–259.
14. 14) H. Matsumoto, E. Sukedai and H. Hashimoto: Mater. Trans. JIM 40 (1999) 1436–1443.10.2320/matertrans1989.40.1436 ↗
15. 15) E. Sukedai and H. Matsumoto: J. Phys. Conference Series 241 (2010) 012106.10.1088/1742-6596/241/1/012106 ↗