journal article·2005Open access

Irradiation Effects on Precipitation in Reduced-Activation Ferritic/Martensitic Steels

Hiroyasu Tanigawa, Hideo Sakasegawa, Ronald L. Klueh

MATERIALS TRANSACTIONS· Volume 46· Issue 3

Abstract

It was previously reported that reduced-activation ferritic/martensitic steels (RAFs), such as F82H-IEA and its heat treatment variant, ORNL9Cr-2WVTa, JLF-1 and 2%Ni-doped F82H, show a variety of changes in ductile-brittle transition temperature (DBTT) and yield stress after irradiation at 573 K up to 5 dpa. These differences could not be interpreted as an effect of irradiation hardening caused by dislocation loop formation. In this paper, the effects of irradiation on precipitation of RAFs were investigated to determine how these effects might affect the mechanical properties. The precipitation behavior of the irradiated steels was examined by weight analysis, X-ray diffraction analysis and chemical analysis on extraction residues. These analyses suggested that irradiation caused (1) an increase of the amount of precipitates (mainly M23C6), (2) an increase of Cr and decrease of W contained in precipitates, and (3) the disappearance of MX (TaC) in ORNL9Cr and JLF-1.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fusion materials and technologies · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fusion Engineering Research, Japan Atomic Energy Research Institute

System Engineering Technology Division, Japan Nuclear Cycle Development Institute

Metals & Ceramics Division, Oak Ridge National Laboratory

References (22)

Show source-provided references
1. 1) K. Shiba, M. Suzuki and A. Hishinuma: J. Nucl. Mater. 233–237 (1996) 309–312.10.1016/S0022-3115(96)00223-1 ↗
2. 2) H. Tanigawa, M. A. Sokolov, K. Shiba and R. L. Klueh: Fusion Sci. Tech. 44 (2003) 206–210.10.13182/FST44-206 ↗
3. 3) N. Hashimoto, H. Tanigawa, M. Ando, T. Sawai, K. Shiba and R. L. Klueh: Fusion Materials Semiannual Progress Report, (U.S. Dept. of Energy, Office of Fusion Energy Science) DOE/ER-0313/35 (2003) pp. 41–44.
4. 4) R. Schaeublin, D. Gelles and M. Victoria: J. Nucl. Mater. 307–311 (2002) 197–202.10.1016/S0022-3115(02)01034-6 ↗
5. 5) T. Ohmura, T. Hara and K. Tsuzaki: J. Mater. Res. 18 (2003) 1465–1470.10.1557/JMR.2003.0201 ↗
6. 6) R. L. Klueh and D. R. Harries: High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, (American Society for Testing and Materials, Philadelphia, 2001) pp. 103–112.10.1520/MONO10025M ↗
7. 7) P. J. Maziasz, R. L. Klueh and J. M. Vitek: J. Nucl. Mater. 141–143 (1986) 929–937.10.1016/0022-3115(86)90120-0 ↗
8. 8) A. Kimura and H. Matsui: J. Nucl. Mater. 212–215 (1994) 701–706.10.1016/0022-3115(94)90148-1 ↗
9. 9) H. Tanigawa, H. Sakasegawa, E. A. Payzant, S. J. Zinkle, R. L. Klueh and A. Kohyama: Fusion Materials Semiannual Progress Report, (U.S. Dept. of Energy, Office of Fusion Energy Science) DOE/ER-0313/35 (2003) pp. 37–40.
10. 10) H. Tanigawa, H. Sakasegawa, S. J. Zinkle, R. L. Klueh and A. Kohyama: Fusion Materials Semiannual Progress Report, (U.S. Dept. of Energy, Office of Fusion Energy Science) DOE/ER-0313/35 (2003) pp. 30–32.
11. 11) K. Shiba: Proc. the IEA WorkShop/Working Group Meeting on Ferritic/Martensitic Steels, ORNL/M-6627 (Oak Ridge National Laboratory, Oak Ridge, Tennessee 1998) pp. 80–113.
12. 12) K. Shiba, JAERI tech., (2005) to be published.
13. 13) T. S. Morgan, E. A. Little and R. G. Faulkner: Effects of Radiation on Materials: 16th International Symposium, ASTM STP 1175, Eds. R. E. Stoller, A. S. Kumar and D. S. Gelles (American Society for Testing and Materials, Philadelphia, 1994) pp. 607–621.10.1520/STP23961S ↗
14. 14) R. Schaublin, P. Spatig and M. Victoria: J. Nucl. Mater. 258–263 (1998) 1350–1355.10.1016/S0022-3115(98)00337-7 ↗
15. 15) Y. Kohno, A. Kohyama, M. Yoshino and K. Asakura: J. Nucl. Mater. 212–215 (1994) 707–713.10.1016/0022-3115(94)90149-X ↗
16. 16) H. Tanigawa, M. Ando, Y. Katoh, T. Hirose, H. Sakasegawa, S. Jitsukawa, A. Kohyama and T. Iwai: J. Nucl. Mater. 297 (2001) 279–284.10.1016/S0022-3115(01)00633-X ↗
17. 17) M. Tamura, K. Shinozuka, K. Masamura, K. Ishikawa and S. Sugimoto: J. Nucl. Mater. 258–263 (1998) 1158–1162.10.1016/S0022-3115(98)00151-2 ↗
18. 18) H. Sakasegawa, Y. Katoh, A. Kohyama, M. Tamura and T. Kumagaya: Collected Abstracts of the 2001 Autumn Meeting of the Japan Inst. Metals, (2001) p. 64.
19. 19) E. Wakai, N. Hashimoto, K. Shiba, T. Sawai, J. P. Robertson and R. L. Klueh: Fusion Materials Semiannual Progress Report, (U.S. Dept. of Energy, Office of Fusion Energy Science) DOE/ER-0313/23 (1997) pp. 190–197.
20. 20) A. Inoue and T. Msumoto: Met. Trans. A 11A (1980) 739–747.10.1007/BF02661203 ↗
21. 21) Y. Kohno, D. S. Gelles, A. Kohyama, M. Tamura and A. Hishinuma: J. Nucl. Mater. 191–194 (1992) 868–873.10.1016/0022-3115(92)90597-E ↗
22. 22) P. J. Maziasz and R. L. Klueh: Effects of Radiation on Materials: 11th International Symposium, ASTM STP 1125, Eds. R. E. Stoller, A. S. Kumar and D. S. Gelles (American Society for Testing and Materials, Philadelphia, 1992) pp. 1135–1156.