Distribution of Ni, Cr, Mn, Co and Cu between Fe-Ni Alloy and FeOX-MgO-SiO2 Base Slags
Source abstract
Abstract
The distribution of nickel and minor elements such as chromium, manganese, cobalt and copper between the Fe–Ni alloy and the FeOX–MgO–SiO2 base slag in a magnesia crucible was studied at 1773 and 1873 K under controlled partial pressure of oxygen in a range between 1.8×10−5 and 3.2×10−2 Pa using CO–CO2 gas mixtures. The effect of adding lime (CaO/SiO2 molar ratio of about 1) and alumina (AlO1.5/SiO2 molar ratio of about 0.25) to the plain FeOX–MgO–SiO2 slag was also investigated. The distribution ratios of chromium and manganese, defined by (mass%X in slag)/[mass%X in alloy] where X is the minor element, for the plain slag at 1773 K have large values greater than 100 and 1000, respectively. These are 4 and 5 orders of magnitude larger than that of nickel, while those of cobalt and copper are of a magnitude similar to that of nickel. It was clarified that the addition of lime reduces the distribution of chromium and manganese into the slag while the addition of alumina increases the dissolution of chromium though it reduces the dissolution of nickel, cobalt and copper.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Magnesium Oxide Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. 1) Y. Wiryokusumo, A. S. Loebis, T. Badrujaman and T. Miraza: Proceedings of the Nickel-Cobalt 97, vol. III Pyrometallurgical Operations, the Environment and Vessel Integrity in Nonferrous Smelting and Converting, (Metallurgical Society of CIM, 1997) pp. 175–189.
2. 2) Korean Zinc Nickel Plant: Private Communication, 1997, October 6.
3. 3) B. Terry: Extractive Metallurgy of Nickel, ed. by A. R. Burkin (John Wiley & Sons, 1987) pp. 24–28.
4. 4) R. U. Pagador, M. Hino and K. Itagaki: Metall. Rev. MMIJ 13 (1996) 90–103.
5. 5) R. U. Pagador, M. Hino and K. Itagaki: Mater. Trans., JIM 40 (1999) 225–232.10.2320/matertrans1989.40.225 ↗
6. 6) A. Muan and E. F. Osborn: Am. Ceram. Soc. 39 (1956) 121–140.10.1111/j.1151-2916.1956.tb14178.x ↗
7. 7) Slag Atlas: Verein Deutscher Eisenhüttenleute (VDEh), (1995) pp. 170.
8. 8) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 688.
9. 9) B. R. Conard, T. McAneney and R. Sridhar: Metall. Trans. 9B (1978) 463–468.10.1007/BF02654422 ↗
10. 10) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 1455.
11. 11) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 521.
12. 12) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 1182.
13. 13) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 601.
14. 14) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 477.
15. 15) G. R. Belton and R. J. Fruehan: Metall. Trans. 1 (1970) 781–787.10.1007/BF02811755 ↗
16. 16) N. A. Gokcen and M. R. Baren: Metall. Trans. 16A (1985) 907–911.10.1007/BF02814842 ↗
17. 17) R. U. Pagador: Ph.D. thesis, Tohoku University, Japan (1997) pp. 36–42.
18. 18) G. R. Belton and R. J. Fruehan: J. Phys. Chem. 71 (1967) 1403–1410.10.1021/j100864a034 ↗
19. 19) K. Mukai, H. Aibe and T. Kitajima: J. Jpn. Inst. Metals. 46 (1982) 487–493.10.2320/jinstmet1952.46.5_487 ↗
20. 20) K. Mukai, Y. Wasai, K. Funatsu, K. Wasai and H. Koda: J. Jpn. Inst. Metals. 46 (1982) 870–875.10.2320/jinstmet1952.46.9_870 ↗
21. 21) R. U. Pagador, M. Hino and K. Itagaki: J. MMIJ 114 (1998) 127–132.10.2473/shigentosozai.114.127 ↗
22. 22) I. Barin, O. Knacke and O. Kubaschewski: Thermochemical Properties of Inorganic Substances, Supplement, (Springer-Verlag, 1977) pp. 120.10.1007/978-3-662-02293-1 ↗
23. 23) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 1166.
24. 24) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 1171.
25. 25) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 68.
26. 26) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 1213.
27. 27) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 716.
28. 28) Y. Takeda and A. Yazawa: Proceedings of Intern. Conf. on Productivity and Technology in the Metallurgical Industries, (TMS, Koln, 1989) pp. 227–240.
29. 29) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 377.
30. 30) O. Knacke, O. Kubaschewski and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Second Edition, (Springer-Verlag, 1991) pp. 1161.