Class I Creep Deformation of Sn–Ag–Cu Containing Solid Solution Elements and Its Effect on Thermal Fatigue Life of Solder Joints
Source abstract
Abstract
The creep deformation mechanism of Sn–Ag–Cu alloy doped with Bi and Sb (SACBiSb) alloys is theoretically and experimentally analyzed in order to clarify the effect of solid solution additives in Sn–Ag–Cu alloys. The theoretical prediction results and test results are found to mostly agree with each other. The breakaway stress which is the stress at the transition from Class II to Class I in particular is finely reproduced in the theoretical prediction, with a stress of 25 MPa found both by the prediction and test results. In the stress range where the stress is higher than the breakaway stress, the creep strength of SACBiSb is higher than that of Sn–Ag–Cu, while it was predicted that the creep strength of Sn–Ag–Cu would be superior to that of SACBiSb in the range of stress lower than the breakaway stress. The thermal fatigue life of SACBiSb was predicted to be longer than that of Sn–Ag–Cu in the temperature profile mainly used above the breakaway stress. However, in the temperature profile mainly used in the low-stress range, a reversal of the creep strength between SACBiSb and Sn–Ag–Cu was predicted to occur and the loss of the superiority of SACBiSb in the thermal fatigue life was also predicted.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Shibaura Institute of Technology
Department of Materials Science and Engineering, Shibaura Institute of Technology
References (29)
Show source-provided references
1. 1) H. Nishida: J. Japan Inst. Electron. Packag. 22 (2019) 596–601. doi:10.5104/jiep.22.59610.5104/jiep.22.596 ↗
2. 2) H. Watanabe, T. Asai, H. Hokazono and S. Saito: J. Japan Inst. Electron. Packag. 19 (2016) 427–434. doi:10.5104/jiep.19.42710.5104/jiep.19.427 ↗
3. 3) H. Watanabe: J. Japan Inst. Electron. Packag. 8 (2005) 183–187. doi:10.5104/jiep.8.18310.5104/jiep.8.183 ↗
4. 4) W. Liu, N.C. Lee, A. Porras, M. Ding, A. Gallagher, A. Huang, S. Chen and J.B. Lee: Electron. Comp. and Technol. Conf. 59, (2009) pp. 994–1007.
5. 5) D.A. Shnawah, S.B.M. Said, M.F.M. Sabri, I.A. Badruddin and F.X. Che: J. Electron. Mater. 41 (2012) 2631–2658. doi:10.1007/s11664-012-2145-z10.1007/s11664-012-2145-z ↗
6. 6) S. Terashima, Y. Kariya and M. Tanaka: Mater. Trans. 45 (2004) 673–680. doi:10.2320/matertrans.45.67310.2320/matertrans.45.673 ↗
7. 7) P.T. Vianco and J.A. Rejent: J. Electron. Mater. 28 (1999) 1138–1143. doi:10.1007/s11664-999-0251-310.1007/s11664-999-0251-3 ↗
8. 8) J. Zhao, L.Q. Wang and L. Wang: J. Alloy. Compd. 375 (2004) 196–201. doi:10.1016/j.jallcom.2003.12.00510.1016/j.jallcom.2003.12.005 ↗
9. 9) M.L. Huang and L. Wang: Metall. Mater. Trans. A 36 (2005) 1439–1446. doi:10.1007/s11661-005-0236-710.1007/s11661-005-0236-7 ↗
10. 10) A.F. Abd El-Rehim and H.Y. Zahran: Mater. Sci. Technol. 30 (2014) 434–438. doi:10.1179/1743284713Y.000000037210.1179/1743284713Y.0000000372 ↗
11. 11) D. Witkin: J. Electron. Mater. 41 (2012) 190–203. doi:10.1007/s11664-011-1748-010.1007/s11664-011-1748-0 ↗
12. 12) W.R. Cannon and O.D. Sherby: Mater. Trans. 1 (1970) 1030–1032. doi:10.1007/BF0281178910.1007/BF02811789 ↗
13. 13) Y. Kariya and M. Otsuka: J. Electron. Mater. 27 (1998) 1229–1235. doi:10.1007/s11664-998-0074-710.1007/s11664-998-0074-7 ↗
14. 14) Y. Kariya and M. Otsuka: J. Electron. Mater. 27 (1998) 866–870. doi:10.1007/s11664-998-0111-610.1007/s11664-998-0111-6 ↗
15. 15) R. Labusch: Phys. Status Solidi B 41 (1970) 659–669. doi:10.1002/pssb.1970041022110.1002/pssb.19700410221 ↗
16. 16) D. Mitlin, C.H. Raeder and R.W. Messler: Metall. Mater. Trans. A 30 (1999) 115–122. doi:10.1007/s11661-999-0199-110.1007/s11661-999-0199-1 ↗
17. 17) J. Friedel: Dislocations, (Pergamon Press, Oxford, United Kingdom, 1964) pp. 385–414.10.1016/B978-0-08-013523-6.50020-X ↗
18. 18) Y. Kanda, K. Zama, Y. Kariya, T. Mikami, T. Kobayashi, T. Sato, T. Enomoto and K. Hirata: InterPACK, (2009) pp. 755–759.
19. 19) Y. Kanda and Y. Kariya: Microelectron. Reliab. 52 (2012) 1435–1440. doi:10.1016/j.microrel.2012.02.00610.1016/j.microrel.2012.02.006 ↗
20. 20) I. Dutta: J. Electron. Mater. 32 (2003) 201–207. doi:10.1007/s11664-003-0210-310.1007/s11664-003-0210-3 ↗
21. 21) I. Dutta, D. Pan, R.A. Marks and S.G. Jadhav: Mater. Sci. Eng. A 410–411 (2005) 48–52. doi:10.1016/j.msea.2005.08.14210.1016/j.msea.2005.08.142 ↗
22. 22) Y. Kanda, Y. Kariya and T. Tasaka: Mater. Trans. 53 (2012) 2072–2077. doi:10.2320/matertrans.MB20120510.2320/matertrans.MB201205 ↗
23. 23) Y. Kanda, Y. Kariya and Y. Oto: J. Electron. Mater. 41 (2012) 580–587. doi:10.1007/s11664-011-1830-710.1007/s11664-011-1830-7 ↗
24. 24) K. Morooka and Y. Kariya: Mater. Trans. 62 (2021) 205–212. doi:10.2320/matertrans.MT-M202031310.2320/matertrans.MT-M2020313 ↗
25. 25) I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids 19 (1961) 35–50. doi:10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
26. 26) C. Wagner: Z. Elektrochem. 65 (1961) 581–591.10.1001/archopht.1961.01840020583023 ↗
27. 27) R.W. Wu, L.C. Tsao, S.Y. Chang, C.C. Jain and R.S. Chen: J. Mater. Sci. Mater. Electron. 22 (2011) 1181–1187. doi:10.1007/s10854-010-0281-x10.1007/s10854-010-0281-x ↗
28. 28) J.D. Morrow: Cyclic Plastic Strain Energy and Fatigue of Metals, (ASTM Inter., Chicago, 1964) pp. 45–87.10.1520/STP43764S ↗
29. 29) C. Kanchanomai, Y. Miyashita and Y. Mutoh: J. Electron. Mater. 31 (2002) 456–465. doi:10.1007/s11664-002-0100-010.1007/s11664-002-0100-0 ↗