Effects of Thermal Aging on the Mechanical Properties of FeCrAl-ODS Alloy Claddings
Source abstract
Abstract
The FeCrAl-ODS alloy claddings were manufactured and Vickers hardness, ring tensile tests and transmission electron microscopy (TEM) observations of these claddings were performed to investigate the effects of thermal aging at 450°C for 5,000 and 15,000 h. The age-hardening of all FeCrAl-ODS alloy cladding was found. In addition, the significant increase in tensile strength was accompanied by much larger loss of ductility. It was suggested that this age-hardening behavior was attributed to the (Ti, Al)-enriched phase (β′ phase) and the α′ phase precipitates (content of Al is <7 mass%). In comparison with FeCrAl-ODS alloys with almost same chemical compositions, there was significant age-hardening in both alloys. However, the extrusion bar with no-recrystallized structures was keeping good ductility. It was suggested that this different behavior of reduction ductility was attributed to the effects of grain boundaries, dislocation densities and specimen preparation direction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Japan Atomic Energy Agency
Materials Science and Engineering, Faculty of Engineering, Hokkaido University
References (31)
Show source-provided references
1. 1) T. Kaito, S. Ohtsuka, M. Inoue, T. Asayama, T. Uwaba, S. Mizuta, S. Ukai, T. Furukawa, C. Ito, E. Kagota, R. Kitamura, T. Aoyama and T. Inoue: J. Nucl. Mater. 386–388 (2009) 294–298.10.1016/j.jnucmat.2008.12.117 ↗
2. 2) Y. Yano, R. Ogawa, S. Yamashita, S. Ohtsuka, T. Kaito, N. Akasaka, M. Inoue, T. Yoshitake and K. Tanaka: J. Nucl. Mater. 419 (2011) 305–309.10.1016/j.jnucmat.2011.05.026 ↗
3. 3) S. Yamashita, Y. Yano, S. Ohtsuka, T. Yoshitake, T. Kaito, S. Koyama and K. Tanaka: J. Nucl. Mater. 442 (2013) 417–424.10.1016/j.jnucmat.2013.04.051 ↗
4. 4) Y. Yano, T. Tanno, H. Oka, S. Ohtsuka, T. Inoue, S. Kato, T. Furukawa, T. Uwaba, T. Kaito, S. Ukai, N. Oono, A. Kimura, S. Hayashi and T. Torimaru: J. Nucl. Mater. 487 (2017) 229–237.10.1016/j.jnucmat.2017.02.021 ↗
5. 5) Y. Yano, Y. Sekio, T. Tanno, S. Kato, T. Inoue, H. Oka, S. Ohtsuka, T. Furukawa, T. Uwaba, T. Kaito and S. Ukai: J. Nucl. Mater. 516 (2019) 347–353.10.1016/j.jnucmat.2019.01.052 ↗
6. 6) A. Katoh, H. Hayafune and S. Kotake: Nucl. Eng. Des. 280 (2014) 586–597.10.1016/j.nucengdes.2014.08.031 ↗
7. 7) K.A. Terrani: J. Nucl. Mater. 501 (2018) 13–30.10.1016/j.jnucmat.2017.12.043 ↗
8. 8) Y. Yamamoto, B.A. Pint, K.A. Terrani, K.G. Field, Y. Yang and L.L. Snead: J. Nucl. Mater. 467 (2015) 703–716.10.1016/j.jnucmat.2015.10.019 ↗
9. 9) G.P. Massey, K.A. Terrani, S.N. Dryepondt and B.A. Pint: J. Nucl. Mater. 470 (2016) 128–138.10.1016/j.jnucmat.2015.12.018 ↗
10. 10) K.A. Gamble, T. Barani, D. Pizzocri, J.D. Hales, K.A. Terrani and G. Pastore: J. Nucl. Mater. 491 (2017) 55–66.10.1016/j.jnucmat.2017.04.039 ↗
11. 11) C. Tang, M. Stueber, H.J. Seifert and M. Steinbrueck: Corros. Rev. 35 (2017) 141–165.10.1515/corrrev-2017-0010 ↗
12. 12) Y. Lee, J.I. Lee and H.C. NO: Nucl. Eng. Technol. 49 (2017) 1031–1043.10.1016/j.net.2017.03.012 ↗
13. 13) W. Zhong, P.A. Mouche and B.J. Heuser: J. Nucl. Mater. 498 (2018) 137–148.10.1016/j.jnucmat.2017.10.021 ↗
14. 14) Y. Katoh and K.A. Terrani: ORNL/TM-2015/454 (2015) 1–39.10.1007/s00266-015-0468-x ↗
15. 15) V.A. Avincola, M. Grosse, U. Stegmaier, M. Steinbrueck and H.J. Seifert: Nucl. Eng. Des. 295 (2015) 468–478.10.1016/j.nucengdes.2015.10.002 ↗
16. 16) P. Dou, A. Kimura, R. Kasada, T. Okuda, M. Inoue, S. Ukai, S. Ohnuki, T. Fujisawa and F. Abe: J. Nucl. Mater. 444 (2014) 441–453.10.1016/j.jnucmat.2013.10.028 ↗
17. 17) W. Han, K. Yabuuchi, A. Kimura, S. Ukai, N. Oono, T. Kaito, T. Torimaru and S. Hayashi: Nucl. Mater. Eng. 9 (2016) 610–615.10.1016/j.nme.2016.05.015 ↗
18. 18) R. Kamikawa, S. Ukai, N. Oono, T. Kaito, T. Torimaru, A. Kimura, S. Hayashi, H. Masuda and E. Sato: Nucl. Mater. Eng. 9 (2016) 338–341.10.1016/j.nme.2016.08.006 ↗
19. 19) T. Maeda, S. Ukai, S. Hayashi, N. Oono, Y. Shizukawa and K. Sakamoto: J. Nucl. Mater. 516 (2019) 317–326.10.1016/j.jnucmat.2019.01.041 ↗
20. 20) Y. de Carlan, A. Alamo, M.H. Mathon, G. Geoffroy and A. Castaing: J. Nucl. Mater. 283–287 (2000) 672–676.10.1016/S0022-3115(00)00277-4 ↗
21. 21) M.H. Mathon, Y. de Carlan, G. Geoffroy, X. Averty, A. Alamo and C.H. de Novion: J. Nucl. Mater. 312 (2003) 236–248.10.1016/S0022-3115(02)01630-6 ↗
22. 22) K. Chandra, V. Kain, V. Bhutani, V.S. Raja, R. Tewari, G.K. Dey and J.K. Chakravartty: Mater. Sci. Eng. A 534 (2012) 163–175.10.1016/j.msea.2011.11.055 ↗
23. 23) T. Takeuchi, J. Kameda, Y. Nagai, T. Toyama, Y. Matsukawa, Y. Nishiyama and K. Onizawa: J. Nucl. Mater. 425 (2012) 60–64.10.1016/j.jnucmat.2011.12.004 ↗
24. 24) K. Fujii and K. Fukuya: J. Nucl. Mater. 440 (2013) 612–616.10.1016/j.jnucmat.2013.04.072 ↗
25. 25) T.G. Lach, A. Devaraji, K.J. Lenoard and T.S. Byun: J. Nucl. Mater. 510 (2018) 382–395.10.1016/j.jnucmat.2018.08.038 ↗
26. 26) W. Sang, P. Dou and A. Kimura: J. Nucl. Mater. 535 (2020) 152164.10.1016/j.jnucmat.2020.152164 ↗
27. 27) P. Dou, Z. Xin, W. Sang and A. Kimura: J. Nucl. Mater. 540 (2020) 152368.10.1016/j.jnucmat.2020.152368 ↗
28. 28) C. Capdevila, M.K. Miller and K.F. Russell: J. Mater. Sci. 43 (2008) 3889–3893.10.1007/s10853-007-2228-z ↗
29. 29) R. Kasada, N. Toda, K. Yutani, H.S. Cho, H. Kishimoto and A. Kimura: J. Nucl. Mater. 367–370 (2007) 222–228.10.1016/j.jnucmat.2007.03.141 ↗
30. 30) Y. Oka, S. Koshizuka, Y. Ishiwatari and A. Yamaji: Super Light Water Reactors and Super Fast Reactors (Springer, Boston, 2010) pp. 1–78.10.1007/978-1-4419-6035-1_1 ↗
31. 31) T. Tanno, Y. Yano, H. Oka, S. Ohtsuka, T. Uwaba and T. Kaito: Nucl. Mater. Eng. 9 (2016) 353–359.10.1016/j.nme.2016.02.009 ↗