Influence of Temperature and Dwelling Time on Low-Cycle Fatigue Characteristic of Isotropic Conductive Adhesive Joint
Source abstract
Abstract
The effects of temperature and dwell time on the low-cycle fatigue life of Ag-epoxy based conductive adhesive have been investigated by using a micro-joint specimen. The low cycle fatigue life of the conductive adhesive increases when test temperature is elevated beyond the glass transition point. On the other hand, the dwell time at 398 K reduces the fatigue life, which, however, is increased by the dwell time at 348 K. The cross-sectional image suggests the embrittlement of epoxy resin during the dwell time at 398 K, which reduces the fatigue endurance of the conductive adhesive. In contrast, some kind of recovery effects exists during dwell time near the glass transition temperature, which improves the fatigue life.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Shibaura Institute of Technology
Graduate School of Shibaura Institute of Technology
References (20)
Show source-provided references
1. 1) D. Lu, Q. K. Tong and C. P. Wong: IEEE Trans. Electron. Packag. Manuf. 22 (1999) 223–227.10.1109/6104.795857 ↗
2. 2) S. Kohinata: J. Jpn. Inst. Electron. Packag. 9 (2006) 495–505.10.5104/jiep.9.495 ↗
3. 3) R. Kisiel: J. Electron. Packag. 124 (2002) 367–370.10.1115/1.1497628 ↗
4. 4) R. R. Gomatam and E. Sancaktar: Proc. ASME Int. Mech. Eng. Congress and Exposition, (American Society of Mechanical Engineers, 2004) pp. 247–260.10.1115/IMECE2004-60543 ↗
5. 5) R. R. Gomatam and E. Sancaktar: J. Adhesion Sci. Technol. 20 (2006) 53–68.10.1163/156856106775212378 ↗
6. 6) M. Inoue, H. Muta, T. Maekawa, S. Yamanaka and K. Suganuma: J. Electron. Mater. 37 (2008) 462–468.10.1007/s11664-007-0378-z ↗
7. 7) Y. Kanda, Y. Kariya and Y. Mochizuki: Mater. Trans. 49 (2008) 1524–1530.10.2320/matertrans.MF200852 ↗
8. 8) Y. Kanda and Y. Kariya: J. Electron. Mater. 39 (2010) 238–245.10.1007/s11664-009-1003-0 ↗
9. 9) J. H. Constable, T. Kache, H. Teichmann, S. Muhle and M. A. Gaynes: IEEE Trans. Compon. Packag. Tech. 22 (1998) 76–83.10.1109/6144.774731 ↗
10. 10) O. Rusanen: Proc. 4th Int. Conf. on Adhesive Joining and Coating Technology in Electronics Manufacturing, (the Institute of Electrical and Electronics Engineering, 2000) pp. 194–198.
11. 11) C. Kanchanomai and Y. Mutoh: Fatig. Fract. Eng. Mater. Struct. 30 (2007) 443–457.10.1111/j.1460-2695.2006.01088.x ↗
12. 12) C. K. Lin and C. M. Huang: J. Electron. Mater. 35 (2006) 292–301.10.1007/BF02692449 ↗
13. 13) Y. Kariya, T. Morihata, E. Hazawa and M. Otsuka: J. Electron. Mater. 30 (2001) 1184–1189.10.1007/s11664-001-0148-2 ↗
14. 14) R. Kusibiki, H. Ishino and Y. Kariya: Proc. 17th Micro Electronics Symposium, (Japan Institute of Electronics Packaging, 2007) pp. 183–186.
15. 15) Y. Kariya and T. Suga: Fatig. Fract. Eng. Mater. Struct. 30 (2007) 413–419.10.1111/j.1460-2695.2006.01091.x ↗
16. 16) C. Kanchanomai and Y. Mutoh: Mater. Sci. Eng. A 381 (2004) 113–120.10.1016/j.msea.2004.04.018 ↗
17. 17) S. Taira, M. Fujino and T. Takahashi: J. Soc. Mater. Sci. Jpn. 27 (1978) 434–439.10.2472/jsms.27.434 ↗
18. 18) S. Taira, M. Fujino and M. Yoshida: J. Soc. Mater. Sci. Jpn. 27 (1978) 447–453.10.2472/jsms.27.447 ↗
19. 19) T. Nemoto, S. Sasaki, H. Hachiya and K. Takeda: Proc. Mechanical Engineering Congress 2000, (The Japan Society of Mechanical, 2000) pp. 223–224.
20. 20) H. Umino, A. Ishikawa and K. Takeda: Proc. 52th JSMS Annual Meeting, (The Society of Materials Science, Japan, 2003) pp. 194–195.