journal article·2021-06-01Open access

Fabrication of the Casting Products in Cu–Zn–Mn–Ni Medium-Entropy Brasses

Takeshi Nagase, Akihiro Shibata, Mitsuaki Matsumuro, Mamoru Takemura, Satoshi Semboshi

MATERIALS TRANSACTIONS· Volume 62· Issue 6

Abstract

The ingots of CuxZnMnNi (x = 1, 2) medium-entropy (ME) brasses were fabricated using metallic mold-casting process without a vacuum chamber. The molten metal was obtained by high-frequency melting of the mixture of pure Cu, pure Ni, and pre-alloy ingots of Mn–Cu and Zn–Ni using silica-based crucible in Ar flow. The metallic mold-casting ingots were obtained using centrifugal casting in air atmosphere. The composite of body-centered-cubic (BCC) and face-centered-cubic (FCC) phases were obtained in the ingots of equiatomic CuZnMnNi ME brass, while a near-single FCC phase was obtained in the ingots of non-equiatomic Cu2ZnMnNi ME brass, where the identification of the constituent phases was mainly performed by XRD analysis. The ingots showed superior deformability and high 0.2% proof stress during compression test conducted at room temperature.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Metallurgy and Material Science · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Center for Ultra-High Voltage Electron Microscopy, Osaka University

Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University

Osaka Research Institute of Industrial Science and Technology

Institute for Materials Research, Tohoku University

References (47)

Show source-provided references
1. 1) B. Cantor, I.T.H. Chang, P. Knight and A.J.B. Vincent: Mater. Sci. Eng. A 375–377 (2004) 213–218.10.1016/j.msea.2003.10.257 ↗
2. 2) J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau and S.Y. Chang: Adv. Eng. Mater. 6 (2004) 299–303.10.1002/adem.200300567 ↗
3. 3) S. Ranganathan: Curr. Sci. 85 (2003) 1404–1406. https://www.currentscience.ac.in/Downloads/article_id_085_10_1404_1406_0.pdf
4. 4) Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen and P.K. Liew: Adv. Eng. Mater. 10 (2008) 534–538.10.1002/adem.200700240 ↗
5. 5) J.W. Yeh: JOM 65 (2013) 1759–1771.10.1007/s11837-013-0761-6 ↗
6. 6) M.H. Tsai and J.W. Yeh: Mater. Res. Lett. 2 (2014) 107–123.10.1080/21663831.2014.912690 ↗
7. 7) Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw and Z.P. Lu: Prog. Mater. Sci. 61 (2014) 1–93.10.1016/j.pmatsci.2013.10.001 ↗
8. 8) B.S. Murty, J.-W. Yeh and S. Ranganathan: High-Entropy Alloys, first ed., (Elsevier, Amsterdam, 2014).10.1016/B978-0-12-800251-3.00002-X ↗
9. 9) M.C. Gao, J.-W. Yeh, P.K. Liaw and Y. Zhang: High-Entropy Alloys, Fundamentals and Applications, first ed., (Springer, Berlin, 2016).10.1007/978-3-319-27013-5 ↗
10. 10) A. Takeuchi: J. Jpn. Inst. Metals and Materials 79 (2015) 157–168.10.2320/jinstmet.J2014046 ↗
11. 11) A. Takeuchi: J. Jpn. Soc. Powder Metall. 63 (2016) 209–216.10.2497/jjspm.63.209 ↗
12. 12) Y.F. Ye, Q. Wang, J. Lu, C.T. Liu and Y. Yang: Mater. Today 19 (2016) 349–362.10.1016/j.mattod.2015.11.026 ↗
13. 13) D.B. Miracle and O.N. Senkov: Acta Mater. 122 (2017) 448–511.10.1016/j.actamat.2016.08.081 ↗
14. 14) T. Nagase: J. Soc. Mech. Eng. 121 (2018) 8–11.
15. 15) W. Zhang, P.K. Liew and Y. Zhang: Sci. China Mater. 61 (2018) 2–22.10.1007/s40843-017-9195-8 ↗
16. 16) D.B. Miracle: Nat. Commun. 10 (2019) 1805.10.1038/s41467-019-09700-1 ↗
17. 17) T. Nagase: KINZOKU 89 (2019) 899–910.
18. 18) T. Nagase, M. Takemura, M. Matsumuro and T. Maruyama: J. JFS 89 (2017) 119–129.
19. 19) T. Nagase, M. Takemura, M. Matsumuro and T. Maruyama: Mater. Trans. 59 (2018) 255–264.10.2320/matertrans.F-M2017851 ↗
20. 20) T. Nagase, T. Kakeshita, K. Matsumura, K. Nakazawa, S. Furuya, N. Ozoe and K. Yoshino: Mater. Des. 184 (2019) 108172.10.1016/j.matdes.2019.108172 ↗
21. 21) K.J. Laws, C. Crosby, A. Sridhar, P. Conway, L.S. Koloadin, M. Zhao, S. Aron-Dine and L.C. Bassman: J. Alloy. Compd. 650 (2015) 949–961.10.1016/j.jallcom.2015.07.285 ↗
22. 22) T. Nagase, A. Shibata, M. Matsumuro, M. Takemura and S. Semboshi: Mater. Des. 181 (2019) 107900.10.1016/j.matdes.2019.107900 ↗
23. 23) Dou Goukin Imono No Hyojyun, (Japan Foundry Society, 2011).
24. 24) B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George and R.O. Ritchie: Science 345 (2014) 1153–1158.10.1126/science.1254581 ↗
25. 25) O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang and P.K. Liaw: Intermetallics 18 (2010) 1758–1765.10.1016/j.intermet.2010.05.014 ↗
26. 26) O.N. Senkov, G.B. Wilks, J.M. Scott and D.B. Miracle: Intermetallics 19 (2011) 698–706.10.1016/j.intermet.2011.01.004 ↗
27. 27) O.N. Senkov, J.M. Scotta, S.V. Senkova, D.B. Miracle and C.F. Woodward: J. Alloy. Compd. 509 (2011) 6043–6048.10.1016/j.jallcom.2011.02.171 ↗
28. 28) O.N. Senkov, J.M. Scott, S.V. Senkova, F. Meisenkothen, D.B. Miracle and C.F. Woodward: J. Mater. Sci. 47 (2012) 4062–4074.10.1007/s10853-012-6260-2 ↗
29. 29) O.N. Senkov, D.B. Miracle, K.J. Chaput and J.-P. Couzinie: J. Mater. Res. 33 (2018) 3092–3128.10.1557/jmr.2018.153 ↗
30. 30) T. Nagase, S. Anada, P.D. Rack, J.H. Noh, H. Yasuda, H. Mori and T. Egami: Intermetallics 38 (2013) 70–79.10.1016/j.intermet.2013.02.009 ↗
31. 31) T. Nagase, S. Anada, P.D. Rack, J.H. Noh, H. Yasuda, H. Mori and T. Egami: Intermetallics 26 (2012) 122–130.10.1016/j.intermet.2012.02.015 ↗
32. 32) M. Todai, T. Nagase, T. Hori, A. Matsugaki, A. Sekita and T. Nakano: Scr. Mater. 129 (2017) 65–68.10.1016/j.scriptamat.2016.10.028 ↗
33. 33) S.P. Wang and J. Xu: Mater. Sci. Eng. C 73 (2017) 80–89.10.1016/j.msec.2016.12.057 ↗
34. 34) T. Nagase, M. Todai, T. Hori and T. Nakano: J. Alloy. Compd. 753 (2018) 412–421.10.1016/j.jallcom.2018.04.082 ↗
35. 35) T. Nagase, K. Mizuuchi and T. Nakano: Entropy 21 (2019) 483.10.3390/e21050483 ↗
36. 36) T. Hori, T. Nagase, M. Todai, A. Matsugaki and T. Nakano: Scr. Mater. 172 (2019) 83–87.10.1016/j.scriptamat.2019.07.011 ↗
37. 37) T. Nagase, Y. Iijima, A. Matsugaki, K. Ameyama and T. Nakano: Mater. Sci. Eng. C 107 (2020) 110322.10.1016/j.msec.2019.110322 ↗
38. 38) K.M. Youssef, A.J. Zaddach, C. Niu, D.L. Irving and C.C. Koch: Mater. Res. Lett. 3 (2015) 95–99.10.1080/21663831.2014.985855 ↗
39. 39) R. Feng, M.C. Gao, C. Lee, M. Mathes, T. Zuo, S. Chen, J.A. Hawk, Y. Zhang and P.K. Liaw: Entropy 18 (2016) 333.10.3390/e18090333 ↗
40. 40) Y. Qiu, Y.J. Hu, A. Taylor, M.J. Styles, R.K.W. Marceau, A.V. Ceguerra, M.A. Gibson, Z.K. Liu, H.L. Fraser and N. Birbilis: Acta Mater. 123 (2017) 115–124.10.1016/j.actamat.2016.10.037 ↗
41. 41) R. Feng, M.C. Gao, C. Zhang, W. Guo, J.D. Poplawsky, F. Zhang, J.A. Hawk, J.C. Neuefeind, Y. Ren and P.K. Liaw: Acta Mater. 146 (2018) 280–293.10.1016/j.actamat.2017.12.061 ↗
42. 42) T. Nagase, A. Terayama, T. Nagaoka, N. Fuyama and T. Sakamoto: J. JFS 91 (2019) 717–729.
43. 43) T. Nagase, A. Terayama, T. Nagaoka, N. Fuyama and T. Sakamoto: Mater. Trans. 61 (2020) 1369–1380.10.2320/matertrans.F-M2020825 ↗
44. 44) https://www4.hp-ez.com/hp/haradadenki/page2, (assessed, 05/30, 2019).
45. 45) T. Nagase, M. Matsumoto and Y. Fujii: J. Alloy. Compd. 738 (2018) 440–447.10.1016/j.jallcom.2017.12.138 ↗
46. 46) A. Yasuhara: JEOL News 40 (2005) 46–49. https://www.jeol.co.jp/download_jeolnews.html
47. 47) JEOL Ltd.: EM-09100IS Ion Slicer, https://www.jeol.co.jp/en/products/detail/EM-09100IS.html, (assessed, 01/16, 2020).