Dielectric Properties of Poly- and Single-Crystalline BaTi2O5
Source abstract
Abstract
Non-oriented and (010) oriented poly-crystalline BaTi2O5 (BT2) was prepared by hot-pressing and arc-melting, respectively. The dielectric properties of poly-crystalline BT2 were compared with those of single-crystalline BT2 prepared by a floating zone method. The maximum permittivity of (010) oriented poly-crystalline BT2 was 2000 at 720 K, whereas that of single-crystalline BT2 was 6000 at the Curie temperature, Tc (750 K). The permittivity of non-oriented poly-crystalline BT2 was 30 to 300, having a small peak at 720 K. The tanδ of all specimens was 0.01 to 0.2 below Tc and significantly increased with increasing temperature above Tc. The electrical conductivity of (010) oriented poly- and single-crystalline BT2 had almost same values, which were one order higher than that of non-oriented poly-crystalline BT2 and (001) oriented single-crystalline BT2.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Materials Research, Tohoku University
References (24)
Show source-provided references
1. 1) H. M. O ’Bryan, Jr. and J. Thomson, Jr.: J. Am. Ceram. Soc. 57 (1974) 522–526.10.1111/j.1151-2916.1974.tb10801.x ↗
2. 2) D. E. Rase and R. Roy: J. Am. Ceram. Soc. 38 (1955) 102–113.10.1111/j.1151-2916.1955.tb14585.x ↗
3. 3) T. Negas, R. S. Roth, H. S. Parker and D. Minor: J. Solid State Chem. 9 (1974) 297–307.10.1016/0022-4596(74)90087-5 ↗
4. 4) J. J. Ritter, R. S. Roth and J. E. Blendell: J. Am. Ceram. Soc. 69 (1986) 155–162.10.1111/j.1151-2916.1986.tb04721.x ↗
5. 5) K. W. Kirby and B. A. Wechsler: J. Am. Ceram. Soc. 74 (1991) 1841–1847.10.1111/j.1151-2916.1991.tb07797.x ↗
6. 6) T. Akashi, H. Iwata and T. Goto: Mater. Trans. 44 (2003) 1644–1646.10.2320/matertrans.44.1644 ↗
7. 7) T. Akashi, H. Iwata and T. Goto: Mater. Trans. 44 (2003) 802–804.10.2320/matertrans.44.802 ↗
8. 8) Y. Akishige, K. Fukano and H. Shigematsu: Jpn. J. Appl. Phys. 42 (2003) L946–L948.10.1143/JJAP.42.L946 ↗
9. 9) H. Beltrán, B. Gómez, N. Masó, E. Cordoncillo, P. Escribano and A. R. West: J. Appl. Phys. 97 (2005) 084104.
10. 10) Y. Akishige and H. Shigematsu: J. Korean Phys. Soc. 46 (2005) 24–28.
11. 11) J. T. S. Irvine, D. C. Sinclair and A. R. West: Adv. Mater. 2 (1990) 132–138.10.1002/adma.19900020304 ↗
12. 12) A. R. West, D. C. Sinclair and N. Hirose: J. Electroceramics 1 (1997) 65–71.10.1023/A:1009950415758 ↗
13. 13) W. Preis, A. Burgermeister, W. Sitte and P. Supancic: Solid State Ionics 173 (2004) 69–75.10.1016/j.ssi.2004.07.054 ↗
14. 14) D. C. Sinclair and A. R. West: J. Appl. Phys. 66 (1989) 3850–3856.10.1063/1.344049 ↗
15. 15) C. Kittel: Introduction to Solid State Physics, pp. 467–483.
16. 16) H. Abdelkefi, H. Khemakhem, G. Vélu, J. C. Carru and R. Von der Mühll: J. Alloys Compounds 399 (2005) 1–6.10.1016/j.jallcom.2005.03.007 ↗
17. 17) M. E. Drougard and D. R. Young: Phys. Rev. 95 (1954) 1152–1153.10.1103/PhysRev.95.1152 ↗
18. 18) D. Richter and S. Trolier-McKinstry: Nanoelectronics and Information Technology, (Wiley-VCH, Weinheim, 2003) p. 59.
19. 19) M. Yashima, R. Tu, T. Goto and H. Yamane: Appl. Phys. Lett. 87 (2005) 101909.10.1063/1.2042636 ↗
20. 20) Y. Wu, M. J. Forbess, S. Seraji, S. J. Limmer, T. P. Chou and G. Cao: J. Appl. Phys. 89 (2001) 5647–5652.10.1063/1.1366657 ↗
21. 21) T. Akashi, K. Morita, T. Hirai, H. Yamane and T. Goto: Mater. Trans. 42 (2001) 1823–1826.10.2320/matertrans.42.1823 ↗
22. 22) N. Hirose and A. R. West: J. Am. Ceram. Soc. 79 (1996) 1633–1641.10.1111/j.1151-2916.1996.tb08775.x ↗
23. 23) J. Nowotny and M. Rekas: Ceramics International 20 (1994) 225–235.10.1016/0272-8842(94)90057-4 ↗
24. 24) T. Kimura, T. Goto, H. Yamane, H. Iwata, T. Kajiwara and T. Akashi: Acta Cryst. C 59 (2003) i128–130.10.1107/S0108270103021395 ↗