journal article·2003Open access

Cyclic Oxidation Behavior of Iridium-Modified Aluminide Coatings for Nickel-Base Single Crystal Superalloy TMS-75

Feng Wu, Hideyuki Murakami, Hiroshi Harada

MATERIALS TRANSACTIONS· Volume 44· Issue 9

Abstract

The oxidation behavior of iridium-modified aluminide (Ir–Al) coating obtained by a two-step process was investigated. A pure Ir layer was first electrodeposited on the nickel-base single crystal superalloy TMS-75, and then the Ir-coated TMS-75 was treated by a conventional low activity pack-cementation aluminizing process. The oxidation resistance of the Ir–Al coated TMS-75 and the simply aluminized TMS-75 was evaluated by a cyclic oxidation test at 1373 K in air. The results showed that the Ir–Al coated TMS-75 had better thermal cyclic oxidation resistance than the simply aluminized TMS-75. The existence of Ir in the Ir–Al coatings may promote the formation of dense and adherent Al2O3 scale and thus retard the degradation of β-(Ir, Ni)Al phase during oxidation process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

High Temperature Materials 21 Project, Materials Engineering Laboratory, National Institute for Materials Science (NIMS)

Department of Materials Engineering, Graduate School of Engineering, The University of Tokyo

References (14)

Show source-provided references
1. 1) R. Mevrel, C. Duret and R. Pichoir: Mater. Sci. Tech. 2 (1986) 201–206.10.1179/mst.1986.2.3.201 ↗
2. 2) D. K. Das, V. Singh and S. V. Joshi: Metall. Mater. Trans. 29A (1998) 2173–2188.10.1007/s11661-998-0042-0 ↗
3. 3) J. H. Chen and J. A. Little: Surf. Coat. Tech. 92 (1997) 69–77.10.1016/S0257-8972(96)03117-9 ↗
4. 4) V. K. Tolpygo and D. R. Clarke: Acta Mater. 48 (2000) 3283–3293.10.1016/S1359-6454(00)00156-7 ↗
5. 5) J. Angenete and K. Stiller: Mater. Sci. Eng. A316 (2001) 182–194.10.1016/S0921-5093(01)01236-9 ↗
6. 6) F. Wu, H. Murakami and A. Suzuki: Surf. Coat. Tech. 168 (2003) 62–69.10.1016/S0257-8972(03)00009-4 ↗
7. 7) H. Hosoda, T. Takahashi, M. Takehara, T. Kingetsu and H. Masumoto: Mater. Trans., JIM 38 (1997) 871–878.10.2320/matertrans1989.38.871 ↗
8. 8) H. Murakami, T. Honma, Y. Koizumi and H. Harada, in Superalloys/2000, T. M. Pollock, R. D. Kissinger and J. J. Schirra, Editors, p. 747–754, The Minerals, Metals and Materials Society proceedings series, Seven Springs, PA (2000).10.7449/2000/Superalloys_2000_747_756 ↗
9. 9) G. Fisher, P. K. Datta and J. S. Burnell-Gray: Surf. Coat. Tech. 113 (1999) 259–267.10.1016/S0257-8972(99)00008-0 ↗
10. 10) F. Wu, H. Murakami, Y. Yamabe-Mitarai, H. Harada and Y. Yamamoto: as presented at the 202nd Meeting of the electrochemical society, Salt Lake City, October, 2002.
11. 11) Y. Koizumi, T. Kobayashi, T. Yokokawa, T. Kimura, M. Osawa and H. Harada: Proceedings of the International Symposium on Materials for Advanced Power Engineering 1998, Germany, 2000, p. 1089–1194.
12. 12) Y. Zhang, J. A. Haynes, W. Y. Lee, I. G. Wright, B. A. Pint, K. M. Cooley and P. K. Liaw: Metall. Mater. Trans. 32A (2001) 1727–1741.10.1007/s11661-001-0150-6 ↗
13. 13) S. Alperine, P. Steinmetz, P. Josso and A. Costantini: Mater. Sci. Eng. A121 (1989) 367–385.10.1016/0921-5093(89)90789-2 ↗
14. 14) P. Kuppusami and H. Murakami: Submitted to Surf. Coat. Tech.