journal article·2018-11-01Open access

Chalcopyrite Bioleaching Using Adapted Mesophilic Microorganisms: Effects of Temperature, Pulp Density, and Initial Ferrous Concentrations

Kim Anh Nguyen, Danilo Borja, Junhyuk You, Gilsang Hong, Hyunsung Jung, Hyunjung Kim

MATERIALS TRANSACTIONS· Volume 59· Issue 11

Abstract

This study examines the effects of several operating parameters on copper leaching from chalcopyrite ores using an adapted mesophilic bacterial culture. Three temperatures (35, 40, and 45°C), three pulp density (1, 2, and 4% (w/v)), and three initial ferrous ion (Fe(II)) concentrations (5, 10, and 20 g/L) were employed as variable parameters, and their effects on the bioleaching efficiency of chalcopyrite were investigated. After 14 days, the maximum copper bioleaching efficiency was estimated to be ∼64% at a temperature of 45°C, a pH of 1.5, an initial ferrous concentration of 5 g/L, and a pulp density of 4%. More specifically, the chalcopyrite dissolution tests conducted at different temperatures showed a minimal effect of temperature and low leaching efficiency (<20%) regardless of temperature. The trend of chalcopyrite dissolution at different pulp densities showed that Cu extraction tended to increase with increases in pulp density. Moreover, the Cu leaching efficiency associated with mesophilic microorganisms largely decreased when the initial Fe(II) concentration was greater than 10 g/L. The Cu leaching behavior in different test conditions was evalauted with concentrations of total iron (Fe), Fe(II), and ferric ions (Fe(III)), as well as the oxidation-reduction potential (ORP) of the solution used in the test. The Cu leaching rate increased under lower ORP conditions, lower Fe(III):Fe(II) ratios, and balanced Fe(II)–Fe(III) cycles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Extraction and Bioleaching · Minerals Flotation and Separation Techniques · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mineral Resources and Energy Engineering, Chonbuk National University

Department of Geography, University of Calgary

Nano-convergence Materials Center, Korea Institute of Ceramic Engineering & Technology

References (43)

Show source-provided references
1. 1) D. Borja, K.A. Nguyen, R.A. Silva, J.H. Park, V. Gupta, Y. Han, Y. Lee and H. Kim: Minerals 6 (2016) 128.10.3390/min6040128 ↗
2. 2) J. Hong, R.A. Silva, J. Park, E. Lee, J. Park and H. Kim: J. Biosci. Bioeng. 121 (2016) 536–542.10.1016/j.jbiosc.2015.09.009 ↗
3. 3) E. Lee, Y. Han, J. Park, J. Hong, R.A. Silva, S. Kim and H. Kim: J. Environ. Manage. 147 (2015) 124–131.10.1016/j.jenvman.2014.08.019 ↗
4. 4) A. Rubio and F.J. García Frutos: Miner. Eng. 15 (2002) 689–694.10.1016/S0892-6875(02)00124-3 ↗
5. 5) R.A. Silva, D. Borja, G. Hwang, G. Hong, V. Gupta, S.A. Bradford, Y. Zhang and H. Kim: J. Clean. Prod. 168 (2017) 814–822.10.1016/j.jclepro.2017.09.011 ↗
6. 6) C.N. Mulligan, M. Kamali and B.F. Gibbs: J. Hazard. Mater. 110 (2004) 77–84.10.1016/j.jhazmat.2004.02.040 ↗
7. 7) Y. Yang, M. Diao, K. Liu, L. Qian, A.V. Nguyen and G. Qiu: Hydrometallurgy 131 (2013) 93–98.10.1016/j.hydromet.2012.09.003 ↗
8. 8) K. Fu, Y. Ning, S. Chen and Z. Wang: Miner. Process. Extr. Metall. 125 (2016) 1–4.10.1179/1743285515Y.0000000013 ↗
9. 9) J. Wang, S. Zhu, Y.-s. Zhang, H.-b. Zhao, M.-h. Hu, C.-r. Yang, W.-q. Qin and G.-z. Qiu: J. Cent. South Univ. 21 (2014) 728–734.10.1007/s11771-014-1995-3 ↗
10. 10) D. Borja, E. Lee, R.A. Silva, H. Kim, J.H. Park and H. Kim: Journal of the Korean Institute of Resources Recycling 24 (2015) 69–77.10.7844/kirr.2015.24.6.69 ↗
11. 11) E. Lee, Y. Han, J. Park, J. Hong, R.A. Silva, S. Kim and H. Kim: J. Environ. Manage. 147 (2015) 124–131.10.1016/j.jenvman.2014.08.019 ↗
12. 12) J. Park, Y. Han, E. Lee, U. Choi, K. Yoo, Y. Song and H. Kim: Separ. Purif. Tech. 133 (2014) 291–296.10.1016/j.seppur.2014.06.054 ↗
13. 13) R.A. Silva, D. Borja, G. Hwang, G. Hong, V. Gupta, S.A. Bradford, Y. Zhang and H. Kim: J. Clean. Prod. 168 (2017) 814–822.10.1016/j.jclepro.2017.09.011 ↗
14. 14) F. Anjum, M. Shahid and A. Akcil: Hydrometallurgy 117 (2012) 1–12.10.1016/j.hydromet.2012.01.007 ↗
15. 15) S. Panda, P. Parhi, N. Pradhan, U. Mohapatra, L. Sukla and K. Park: Hydrometallurgy 121 (2012) 116–119.10.1016/j.hydromet.2012.03.008 ↗
16. 16) D. Bevilaqua, A. Leite, O. Garcia, Jr. and O. Tuovinen: Process Biochem. 38 (2002) 587–592.10.1016/S0032-9592(02)00169-3 ↗
17. 17) H. Deveci, A. Akcil and I. Alp: Hydrometallurgy 73 (2004) 293–303.10.1016/j.hydromet.2003.12.001 ↗
18. 18) A. Mehta and L. Murr: Biotechnol. Bioeng. 24 (1982) 919–940.10.1002/bit.260240413 ↗
19. 19) S. Mousavi, S. Yaghmaei, M. Vossoughi, A. Jafari and S. Hoseini: Hydrometallurgy 80 (2005) 139–144.10.1016/j.hydromet.2005.08.001 ↗
20. 20) W. Sand, K. Rohde, B. Sobotke and C. Zenneck: Appl. Environ. Microbiol. 58 (1992) 85–92.10.1128/AEM.58.1.85-92.1992 ↗
21. 21) Y. Rodrıguez, A. Ballester, M. Blazquez, F. Gonzalez and J. Munoz: Hydrometallurgy 71 (2003) 47–56.10.1016/S0304-386X(03)00173-7 ↗
22. 22) S.L. Harmer, J.E. Thomas, D. Fornasiero and A.R. Gerson: Geochim. Cosmochim. Acta 70 (2006) 4392–4402.10.1016/j.gca.2006.06.1555 ↗
23. 23) K. Sasaki, Y. Nakamuta, T. Hirajima and O. Tuovinen: Hydrometallurgy 95 (2009) 153–158.10.1016/j.hydromet.2008.05.009 ↗
24. 24) E. Córdoba, J. Muñoz, M. Blázquez, F. González and A. Ballester: Hydrometallurgy 93 (2008) 88–96.10.1016/j.hydromet.2008.04.016 ↗
25. 25) N. Hiroyoshi, M. Hirota, T. Hirajima and M. Tsunekawa: Hydrometallurgy 47 (1997) 37–45.10.1016/S0304-386X(97)00032-7 ↗
26. 26) H. Kametani and A. Aoki: Metall. Mater. Trans. B 16 (1985) 695–705.10.1007/BF02667506 ↗
27. 27) Å. Sandström, A. Shchukarev and J. Paul: Miner. Eng. 18 (2005) 505–515.10.1016/j.mineng.2004.08.004 ↗
28. 28) N. Hiroyoshi, H. Miki, T. Hirajima and M. Tsunekawa: Hydrometallurgy 57 (2000) 31–38.10.1016/S0304-386X(00)00089-X ↗
29. 29) N. Hiroyoshi, H. Miki, T. Hirajima and M. Tsunekawa: Hydrometallurgy 60 (2001) 185–197.10.1016/S0304-386X(00)00155-9 ↗
30. 30) A. Ahmadi, M. Schaffie, Z. Manafi and M. Ranjbar: Hydrometallurgy 104 (2010) 99–105.10.1016/j.hydromet.2010.05.001 ↗
31. 31) A. Bailey and G. Hansford: Biotechnol. Bioeng. 42 (1993) 1164–1174.10.1002/bit.260421006 ↗
32. 32) M. Boon and J. Heijnen: Hydrometallurgy 48 (1998) 187–204.10.1016/S0304-386X(97)00077-7 ↗
33. 33) H. Deveci, A. Akcil and I. Alp: Materials Science and Technology Conference, ed. by F. Kongoli, B. Thomas and K. Sawamiphakdi, (Process Control and Optimization in Ferrous and Non Ferrous Industry, 2003) p. 9.
34. 34) G. Hong, J. Choi, Y. Han, K.-S. Yoo, K. Kim, S.B. Kim and H. Kim: Mater. Trans. 58 (2017) 1069–1075.10.2320/matertrans.M2017014 ↗
35. 35) X. Zhao, R. Wang, X. Lu, J. Lu, C. Li and J. Li: Miner. Eng. 53 (2013) 184–192.10.1016/j.mineng.2013.08.008 ↗
36. 36) E.R. Donati and W. Sand: Microbial Processing of Metal Sulfides, (Springer Science & Business Media, Netherlands, 2007).10.1007/1-4020-5589-7 ↗
37. 37) H. Zhao, J. Wang, W. Qin, M. Hu, S. Zhu and G. Qiu: Miner. Eng. 71 (2015) 159–169.10.1016/j.mineng.2014.10.025 ↗
38. 38) M.P. Silverman and D.G. Lundgren: J. Bacteriol. 77 (1959) 642–647.10.1128/JB.77.5.642-647.1959 ↗
39. 39) J. Stucki and W. Anderson: Soil Sci. Soc. Am. J. 45 (1981) 633–637.10.2136/sssaj1981.03615995004500030039x ↗
40. 40) E. Córdoba, J. Munoz, M. Blázquez, F. González and A. Ballester: Hydrometallurgy 93 (2008) 106–115.10.1016/j.hydromet.2007.11.005 ↗
41. 41) T.-J. Peng, Z. Dan, X.-D. Liu, R.-L. Yu, T. Jiang, G.-H. Gu, C. Miao, G.-Z. Qiu and W.-M. Zeng: T. Nonferr. Metal. Soc. 26 (2016) 544–550.10.1016/S1003-6326(16)64143-2 ↗
42. 42) H. Wang, J.M. Bigham and O.H. Tuovinen: Mater. Sci. Eng. C 26 (2006) 588–592.10.1016/j.msec.2005.04.009 ↗
43. 43) A. Akcil, H. Ciftci and H. Deveci: Miner. Eng. 20 (2007) 310–318.10.1016/j.mineng.2006.10.016 ↗