Electrodeposition Behavior of Zn–Fe Alloy from Zincate Solution Containing Triethanolamine
Source abstract
Abstract
The electrodeposition behavior of Zn–Fe alloys has been investigated at 308 K at current densities of 10–500 A·m−2 and a charge of 5 × 104 C·m−2 in an unagitated zincate solution containing triethanolamine, which forms a stable complex with Fe2+ ions. The content of Fe in the deposit changed significantly depending on the current density. At current densities lower than 20 A·m−2, the content of Fe was approximately 90 mass%, that is, the Zn–Fe alloy exhibited normal co-deposition, whereby the electrochemically more noble Fe deposited preferentially. At current densities higher than 100 A·m−2, however, anomalous co-deposition was observed, whereby the less noble Zn deposited preferentially. The current density at which the Fe content in the deposit changed significantly corresponded to that at which the cathode potential in the total polarization curve abruptly shifted to a less noble region than the equilibrium potential for Zn deposition. Iron deposition and H2 evolution were significantly suppressed by the co-existence of Zn2+ ions in the region of anomalous co-deposition at higher current densities, showing the formation of an inhibitor to deposition arising from Zn2+ ions in the cathode layer. The current efficiency for alloy deposition was not close to zero even in the region of normal co-deposition, and the Fe content in the region of anomalous co-deposition was close to the composition reference line, which shows deposition behavior different from that in sulfate solutions. In the region of normal co-deposition at lower current densities, underpotential deposition of Zn occurred with Fe. TEM analysis revealed that Zn–Fe alloys deposited at lower current densities comprised the stable intermetallic compound Fe5Zn21. The activity coefficient of Zn in the deposit appears to remarkably decrease because of this formation of stable Fe5Zn21.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrochemical Analysis and Applications · Electrodeposition and Electroless Coatings · Ionic liquids properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Kyushu University
Department of Materials Process Engineering, Kyushu University
Department of Applied Chemistry and Biochemistry, Kyushu Sangyo University
References (22)
Show source-provided references
1. 1) K. Hayashi, Y. Ito, C. Kato and Y. Miyoshi: Tetsu-to-Hagane 77 (1991) 1122–1129.10.2355/tetsutohagane1955.77.7_1122 ↗
2. 2) K. Nishimura, Y. Ito, Y. Miyoshi and T. Hada: Tetsu-to-Hagane 72 (1986) 1119–1124.10.2355/tetsutohagane1955.72.8_1119 ↗
3. 3) K. Kondo: Tetsu-to-Hagane 74 (1988) 2300–2306.10.2355/tetsutohagane1955.74.12_2300 ↗
4. 4) T. Fujigaya: Electroplating, Chemical Plating & Engineering Guide, in Japanese, (Nippon Tokin Zairyo Kyodo Kumiai, Tokyo, 2004) pp. 143–159.
5. 5) M. Kawasaki and H. Enomoto: Mekki Kyohon, in Japanese, (Nikkan Kogyo Shinbunsya, Tokyo, 1988) pp. 108–109.
6. 6) A. Brenner: Electrodeposition of Alloys, Vol. 2, (Academic Press, New York and London, 1963) pp. 194–228.10.1016/B978-1-4831-9807-1.50020-9 ↗
7. 7) H. Fukushima, T. Akiyama, J. Lee, M. Yamaguchi and K. Higashi: J. Met. Finish. Soc. Jpn. 33 (1982) 574–578.10.4139/sfj1950.33.574 ↗
8. 8) H. Fukushima, T. Akiyama, M. Yano, T. Ishikawa and R. Kammel: ISIJ Int. 33 (1993) 1009–1015.10.2355/isijinternational.33.1009 ↗
9. 9) Z. Zhang, W. H. Leng, H. B. Shao, J. Q. Zhang, J. M. Wang and C. N. Cao: J. Electroanal. Chem. 516 (2001) 127–130.10.1016/S0022-0728(01)00665-9 ↗
10. 10) J. D. Jensen, D. R. Gabe and G. D. Wilcox: Surf. Coat. Technol. 105 (1998) 240–250.10.1016/S0257-8972(98)00461-7 ↗
11. 11) G. W. Loar, K. R. Romer and T. J. Aoe: Plat. Surf. Finish. 78 (1991) 74–79.
12. 12) M. Sugihara and T. Asai: J. Business Surf. Finish. Soc. Jpn. 29 (1982) 383–387.10.4139/sfj1970.29.383 ↗
13. 13) V. Narasimhamurthy and B. S. Sheshadri: Metal Finish. 95 (1997) 44–47.10.1016/S0026-0576(97)85858-8 ↗
14. 14) H. Fukushima, T. Akiyama and K. Kiyotani: J. MMIJ 109 (1993) 861–864.10.2473/shigentosozai.109.861 ↗
15. 15) H. Nakano, S. Oue, S. Hisano, S. Kobayashi and H. Fukushima: ISIJ 47 (2007) 1029–1033.10.2355/isijinternational.47.1029 ↗
16. 16) T. Akiyama and H. Fukushima: ISIJ 32 (1992) 787–798.10.2355/isijinternational.32.787 ↗
17. 17) T. Akiyama, H. Fukushima and K. Higashi: Tetsu-to-Hagane 72 (1986) 918–923.10.2355/tetsutohagane1955.72.8_918 ↗
18. 18) H. Nakano, S. Arakawa, Y. Takada, S. Oue and S. Kobayashi: J. Japan Inst. Metals 76 (2012) 443–448.10.2320/jinstmet.76.443 ↗
19. 19) H. Nakano, S. Arakawa, Y. Takada, S. Oue and S. Kobayashi: Mater. Trans. 53 (2012) 1946–1951.10.2320/matertrans.M2012241 ↗
20. 20) H. Nakano, T. Akiyama and H. Fukushima: J. Surf. Finish. Soc. Jpn. 49 (1998) 1209–1214.10.4139/sfj.49.1209 ↗
21. 21) S. Haruyama: Hyomen Gijyutsusya no Tameno Denki Kagaku, (Maruzen, Tokyo, 2005) pp. 156–157.
22. 22) H. Nakano, T. Ura, S. Oue and S. Kobayashi: ISIJ 54 (2014) 1653–1660.10.2355/isijinternational.54.1653 ↗