journal article·2019-07-01Open access

Effects of Fe on Microstructures and Mechanical Properties of Ti–15Nb–25Zr–(0, 2, 4, 8)Fe Alloys Prepared by Spark Plasma Sintering

Qiang Li, Xufeng Yuan, Junjie Li, Pan Wang, Masaaki Nakai, Mitsuo Niinomi, Takayoshi Nakano, Akihiko Chiba, Xuyan Liu, Deng Pan

MATERIALS TRANSACTIONS· Volume 60· Issue 9

Abstract

Biomedical Ti–15Nb–25Zr–(0, 2, 4, 8)Fe (mol%) alloys are prepared by mixing pure element powders and spark plasma sintering (SPS). Specimens with diameters of 20 mm and thicknesses of 3 mm are obtained by sintering at 1000°C for 10 min followed by cooling in the furnace. Some of the specimens are then heat-treated at 900°C for 1 h followed by water quenching. Zr and Fe are dissolved in Ti; however, segregation of Nb is observed in all of the alloys. The β and α′′ phases are observed in the as-sintered and heat-treated specimens owing to the insufficient diffusion of the alloying elements. Fe stabilizes the β phase and provides a solution-strengthening effect. With the increase in the Fe content in the as-sintered specimen, the compressive strength and micro-Vickers hardness are improved in the Ti–15Nb–25Zr–(0, 2, 4)Fe alloys and slightly decreased in Ti–15Nb–25Zr–8Fe. The as-sintered Ti–15Nb–25Zr–4Fe alloy exhibits the maximum compressive strength of 1740 MPa. Although the plasticity is decreased by the Fe addition, a fracture strain of approximately 17% is obtained for Ti–15Nb–25Zr–4Fe, indicating a good plasticity. The heat treatment cannot eliminate the segregation of Nb, but can improve the plasticity and slightly increase the strengths of Ti–15Nb–25Zr–(0, 2, 4)Fe. Moreover, the heat-treated Ti–15Nb–25Zr–8Fe exhibits a high strength of approximately 1780 MPa and fracture strain of approximately 19%. Therefore, good comprehensive mechanical properties, including high strengths, high hardnesses, and good plasticities, can be obtained in Fe-added β-Ti alloys prepared by SPS and subsequent optional short heat treatment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, University of Shanghai for Science and Technology

International Iberian Nanotechnology Laboratory (INL)

Singapore Institute of Manufacturing Technology

Department of Mechanical Engineering, Faculty of Science and Engineering, Kindai University

Institute for Materials Research, Tohoku University

Department of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University

Department of Materials Science and Engineering, Graduate School of Science and Technology, Meijo University

Materials Genome Institute, Shanghai University

Research Center for Advanced Metallic Materials, Yangtze Delta Region Institute of Tsinghua University

References (32)

Show source-provided references
1. 1) L.Q. Wang, Z.J. Lin, X.T. Wang, Q.W. Shi, W.Q. Yin, D. Zhang, Z.T. Liu and W.J. Lu: Mater. Trans. 55 (2014) 141–146.10.2320/matertrans.M2013187 ↗
2. 2) L.C. Zhang and H. Attar: Adv. Eng. Mater. 18 (2016) 463–475.10.1002/adem.201500419 ↗
3. 3) Y.P. Peng, C.P. Ju and J.H.C. Lin: Mater. Trans. 59 (2018) 734–740.10.2320/matertrans.M2017371 ↗
4. 4) Y. Liu, K.Y. Li, T. Luo, M. Song, H. Wu, J. Xiao, Y.N. Tan, M. Cheng, B. Chen, X.R. Niu, R. Hu, X.H. Li and H.P. Tang: Mater. Sci. Eng. C 56 (2015) 241–250.10.1016/j.msec.2015.06.010 ↗
5. 5) S. Ehtemam-Haghighi, K.G. Prashanth, H. Attar, A.K. Chaubey, G.H. Cao and L.C. Zhang: Mater. Des. 111 (2016) 592–599.10.1016/j.matdes.2016.09.029 ↗
6. 6) Y.Y. Li, L.M. Zou, C. Yang, Y.H. Li and L.J. Li: Mater. Sci. Eng. A 560 (2013) 857–861.10.1016/j.msea.2012.09.047 ↗
7. 7) L.C. Zhang, D. Klemm, J. Eckert, Y.L. Hao and T.B. Sercombe: Scr. Mater. 65 (2011) 21–24.10.1016/j.scriptamat.2011.03.024 ↗
8. 8) T. Shiraishi, K. Yubuta, T. Shishido and N. Shinozaki: Mater. Trans. 57 (2016) 1986–1992.10.2320/matertrans.MI201501 ↗
9. 9) M.T. Mohammed: Karbala Int. J. Modern Sci. 3 (2017) 224–230.10.1016/j.kijoms.2017.08.005 ↗
10. 10) P.F. Chui: Vacuum 143 (2017) 54–58.10.1016/j.vacuum.2017.05.039 ↗
11. 11) A.L.R. Ribeiro, R.C. Junior, F.F. Cardoso, R.B.F. Filho and L.G. Vaz: J. Mater. Sci. Mater. Med. 20 (2009) 1629–1636.10.1007/s10856-009-3737-x ↗
12. 12) V.A.R. Henriques, E.T. Galvani, S.L.G. Petroni, M.S.M. Paula and T.G. Lemos: J. Mater. Sci. 45 (2010) 5844–5850.10.1007/s10853-010-4660-8 ↗
13. 13) Z.M. Li, B.L. Zheng, Y.T. Wang, T. Topping, Y.Z. Zhou, R.Z. Valiev, A. Shan and E.J. Lavernia: J. Mater. Sci. 49 (2014) 6656–6666.10.1007/s10853-014-8337-6 ↗
14. 14) Z.Y. He, L. Zhang, W.R. Shan, Y.Q. Zhang, Y.H. Jiang, R. Zhou and J. Tan: Acta Metall. Sin. (Engl. Lett.) 29 (2016) 1073–1080.10.1007/s40195-016-0486-y ↗
15. 15) Y. Cui, Y. Li, K. Luo and H.B. Xu: Mater. Sci. Eng. A 527 (2010) 652–656.10.1016/j.msea.2009.08.063 ↗
16. 16) S. Ozan, J.X. Lin, Y.C. Li, Y.W. Zhang, K. Munir, H.W. Jiang and C.E. Wen: J. Mech. Behav. Biomed. Mater. 78 (2018) 224–234.10.1016/j.jmbbm.2017.11.025 ↗
17. 17) Q. Li, M. Niinomi, M. Nakai, Z.D. Cui, S.L. Zhu and X.J. Yang: Mater. Sci. Eng. A 536 (2012) 197–206.10.1016/j.msea.2011.12.103 ↗
18. 18) J.M. Calderon Moreno, C. Vasilescu, S.I. Drob, E.I. Neascu and M. Popa: Mater. Corros. 65 (2014) 703–714.10.1002/maco.201307053 ↗
19. 19) S.L. Chen: Shanghai Nonferrous Metals 35 (2014) 47–52.
20. 20) A. Zafari, Y.P. Ding, J.Z. Cui and K.N. Xia: Metall. Mater. Trans. A 47 (2016) 3633–3648.10.1007/s11661-016-3496-5 ↗
21. 21) S.K. Vajpai, M. Ota, T. Watanabe, R. Maeda, T. Sekiguchi, T. Kusaka and K. Ameyama: Metall. Mater. Trans. A 46 (2015) 903–914.10.1007/s11661-014-2649-7 ↗
22. 22) D.J. Wang, H. Yuan and J.M. Qiang: Metals 7 (2017) 207.10.3390/met7060207 ↗
23. 23) R. Yamanoglu, W. Bradbury, E.A. Olevsky and R.M. German: Met. Mater. Int. 19 (2013) 1029–1034.10.1007/s12540-013-5015-1 ↗
24. 24) R. Yamanoglu, W. Bradbury, E. Karakulak, E.A. Olevsky and R.M. German: Powder Metall. 57 (2014) 380–386.10.1179/1743290114Y.0000000088 ↗
25. 25) L.M. Zou, C. Yang, Y. Long, Z.Y. Xiao and Y.Y. Li: Powder Metall. 55 (2012) 65–70.10.1179/1743290111Y.0000000021 ↗
26. 26) M. Wen, C. Wen, P. Hodgson and Y. Li: Mater. Des. 56 (2014) 629–634.10.1016/j.matdes.2013.11.066 ↗
27. 27) M.A. Hussein, C. Suryanarayana and N. Al-Aqeeli: Mater. Des. 87 (2015) 693–700.10.1016/j.matdes.2015.08.082 ↗
28. 28) W.F. Ho, C.H. Pan, S.C. Wu and H.C. Hsu: J. Alloys Compd. 472 (2009) 546–550.10.1016/j.jallcom.2008.05.015 ↗
29. 29) B.B. Zhang, B.L. Wang, Y.B. Wang, L. Li, Y.F. Zheng and Y. Liu: J. Biomed. Mater. Res. Part B 100B (2012) 185–196.10.1002/jbm.b.31937 ↗
30. 30) J.L. Murray: ASM Handbook, Volume 3 Alloy Phase Piagram, ed. by H. Baker and H. Okamoto, (ASM International, Electronic Vision, 1998) pp. 1194 & 1572.
31. 31) Z.Y. He, L. Zhang, W.R. Shan, Y.Q. Zhang, R. Zhou, Y.H. Jiang and J. Tan: Trans. Nonferrous Met. Soc. China 27 (2017) 848–856.10.1016/S1003-6326(17)60097-9 ↗
32. 32) E.B. Taddei, V.A.R. Henriques, C.R.M. Silva and C.A.A. Cairo: Mater. Sci. Eng. C 24 (2004) 683–687.10.1016/j.msec.2004.08.011 ↗