journal article·2002Open access

A Thermodynamic Study of the HDDR Conditions in the Sm2Fe17Nx Compound

Satoshi Ohga, Satoshi Sugimoto, Nobuki Tezuka, Toshio Kagotani, Koichiro Inomata

MATERIALS TRANSACTIONS· Volume 43· Issue 3

Abstract

This paper describes the relationship between hydrogen pressure and temperature (P-T curve) in the HDDR treatment of the Sm 2 Fe 17 compound. The P-T curve suggested that the HDDR condition of the Sm 2 Fe 17 compound is more sensitive to temperature than that of the Nd 2 Fe 14 B compound. It was also found that the HDDR treatment of the Sm 2 Fe 17 compound has to be controlled in the hydrogen pressure range of one order lower than that of the Nd 2 Fe 14 B compound, because of its lower optimum HDDR temperature. Using the P-T curve, new HDDR treatments named v-HD and s-DR, were carried out in order to induce anisotropic feature. However, the normalized remanence of the new HDDR treated powders was around 0.52, which suggested that the powders were almost magnetically isotropic.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties of Alloys · Hydrogen Storage and Materials · Rare-earth and actinide compounds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science, Graduate School of Engineering, Tohoku University

References (10)

Show source-provided references
1. 1) T. Takeshita and R. Nakayama: Proc. 10th Int’l. Workshop on Rare-Earth Magnets and Their Applications, Kyoto, Japan, ed. by K. J. Strnat and T. Shinjo (The Society of Non-Traditional Technology, Tokyo, Japan, 1989) Vol. 1, pp. 551–557.
2. 2) H. Nakamura, R. Suefuji, S. Sugimoto, M. Okada and M. Homma: J. Appl. Phys. 76 (1994) 6828–6830.10.1063/1.358144 ↗
3. 3) H. Nakamura, K. Kato, D. Book, S. Sugimoto, M. Okada and M. Homma: Proc. 15th Int’l. Workshop on Rare-Earth Magnets and Their Applications, Dresden, Germany, ed. by L. Schultz and K.-H. Müller (Werkstoff-informationsgessellschaft mbH, Frankfurt, Germany, 1998) Vol. 1, pp. 507–516.
4. 4) S. Sugimoto, H. Nakamura, K. Kato, D. Book, T. Kagotani, M. Okada and M. Homma: J. Alloys Comp. 293–295 (1999) 862–867.10.1016/S0925-8388(99)00376-X ↗
5. 5) H. Nakamura, K. Kato, D. Book, S. Sugimoto, M. Okada and M. Homma: IEEE Trans. Magn. 35 (1999) 3274–3276.10.1109/20.800496 ↗
6. 6) J. M. D. Coey and H. Sun: J. Magn. Magn. Mater. 87 (1990) L251–L254.10.1016/0304-8853(90)90756-G ↗
7. 7) T. Iriyama, K. Kobayashi, N. Imaoka and T. Fukuda: IEEE Trans. Magn. 28 (1992) 2326–2331.10.1109/20.179482 ↗
8. 8) H. Nakamura, K. Kurihara, T. Tatsuki, S. Sugimoto, M. Okada and M. Homma: J. Magn. Soc. Jpn. 16 (1992) 163–168.10.3379/jmsjmag.16.163 ↗
9. 9) S. Sugimoto, H. Nakamura, M. Okada and M. Homma: Proc. 12th Intl. Workshop on RE Magnets and Their Applications, Canberra, Australia, ed. by Hi-Perm Laboratory and research Centre for Advanced Mineral and Materials Processing, The University of Western Australia, (Scott Four Colour Print, Perth Australia, 1992) Vol. 1, pp. 372–383.
10. 10) H. Nakamura, S. Sugimoto, M. Okada and M. Homma: Mater. Chem. Phys. 32 (1992) 280–285.10.1016/0254-0584(92)90212-Q ↗