journal article·2006Open access

Fabrication of TiNi Powder by Mechanical Alloying and Shape Memory Characteristics of the Sintered Alloy

Akira Terayama, Hideki Kyogoku, Masaru Sakamura, Shinichiro Komatsu

MATERIALS TRANSACTIONS· Volume 47· Issue 3

Abstract

This paper presents the fabrication condition of TiNi alloy powder by mechanical alloying and shape memory characteristics of the sintered alloy. The effect of mechanical alloying condition on the characteristics of mechanically alloyed powder (MA powder) was investigated. Also, the difference in sintering behavior between the MA powder and the elementally mixed powders by V-blender and the shape memory characteristics of the sintered alloys were also examined. The MA powder was fabricated by milling using a planetary ball mill in a rotational speed between 200 and 500 min−1 for various milling times in an atmosphere of Ar gas. These two types of powders prepared in different processes were sintered using a pulse-current pressure sintering equipment at various sintering temperatures. The powder agglomerated and its particle size became larger with an increase in milling time. The mixture of Ti and Ni powders changed into an amorphous state by processing for 3.6 ks over 300 min−1. The sintered alloy of the MA powder showed more uniform phase of TiNi than that of the elementally mixed powders sintered in a same manner, however, the former showed a lower density than the latter due to a larger particle size of the MA powder of before-sintering. It was found from the measurement of the transformation temperature of the sintered alloy of the MA powder using DSC that the alloy has shape memory characteristics, and the transformation temperatures of the alloy are higher than those of the alloy of the elementally mixed powders due to waste of Ni powder.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Student, Kinki University

Department of Mechanical Engineering, School of Engineering, Kinki University

Tobu Industrial Research Institute of Hiroshima Prefecture

References (17)

Show source-provided references
1. 1) M. Otaguchi, Y. Kaieda, N. Oguro, S. Shite and T. Oie: J. Jpn. Inst. Met. 54 (1990) 214–223.10.2320/jinstmet1952.54.2_214 ↗
2. 2) H. Kyogoku, T. Hatakeyama, F. Yoshida, S. Komatsu and T. Sakuma: Proc. 1998 Powder Metallurgy World Congress (Granada), Vol. 5, (EPMA, 1998) pp. 431–436.
3. 3) H. Kyogoku, T. Tanbo, S. Komatsu, T. Watanabe, F. Yoshida, T. Sakuma and U. Iwata: Advances in Powder Metallurgy & Particulate Materials-2000, (MPIF, Princeton, 2000) pp. 9.45–9.56.
4. 4) H. Kyogoku, F. Yoshida and T. Sakuma: Int. J. Materials Processing Technology (CD-ROM), Vol. 117, Issue3, (2001).
5. 5) H. Kyogoku, T. Tanbo, M. Yokota, S. Komatsu, F. Yoshida, T. Sakuma and U. Iwata: Advances in Powder Metallurgy & Particulate Materials-2001, (MPIF, Princeton, 2001) pp. 7.1–7.9.
6. 6) H. Esaki and M. Tokizane: Mater. Sci. Forum 88–90 (1992) 625–630.10.4028/www.scientific.net/MSF.88-90.625 ↗
7. 7) T. H. Nam, I. S. Ahn, S. G. Hur and S. H. Kang: Advances in Powder Metallurgy & Particulate Materials-1999, (MPIF, Princeton, 1999) pp. 12.95–12.105.
8. 8) K. Kobayashi, A. Matsumoto, K. Ozaki, A. Sugiyama and T. Nishio: J. Jpn. Inst. Met. 63 (1999) 1161–1164.10.2320/jinstmet1952.63.9_1161 ↗
9. 9) M. Otake, K. Isobe, T. Kosugi, K. Tsuchiya and M. Umemoto: J. Jpn. Soc. Powder Powder Metall. 46 (1999) 746–751.10.2497/jjspm.46.746 ↗
10. 10) P. S. Goodwin and C. M. Ward-Close: Mater. Sci. Forum 179–181 (1995) 414–418.10.4028/www.scientific.net/MSF.179-181.411 ↗
11. 11) P. S. Goodwin, T. M. T. Hinder, A. Wisbey and C. M. Ward-Close: Mater. Sci. Forum 269–272 (1998) 53–62.10.4028/www.scientific.net/MSF.269-272.53 ↗
12. 12) P. S. Gilman and J. S. Benjamin: Annu. Rev. Mater. Sci. 13 (1983) 279–300.10.1146/annurev.ms.13.080183.001431 ↗
13. 13) K. Kusaka, T. Khono, T. Kondo and A. Horata: J. Jpn. Soc. Powder Powder Metall. 42 (1995) 383–387.10.2497/jjspm.42.383 ↗
14. 14) L. Lu and M. O. Lai: Mechanical Alloying, (Kluwer Academic Publishers, Boston, 1998) p. 26.10.1007/978-1-4615-5509-4 ↗
15. 15) S. Shiga, T. Norimatsu, T. Itsukaichi, M. Umemoto and I. Okane: J. Jpn. Soc. Powder Powder Metall. 38 (1991) 976–980.10.2497/jjspm.38.976 ↗
16. 16) J. L. Murray: Binary Alloy Phase Diagram, 2nd ed., Vol. 3, Massalski, T. B. ed., (ASM Intern., Materials Park, 1996) p. 2875.
17. 17) J. S. Benjamin: Mater. Sci. Forum 88–90 (1992) 1–17.10.4028/www.scientific.net/MSF.88-90.1 ↗