journal article·2015Open access

Effect of Precipitation of Impurities during Annealing on the Rate of Recovery and Recrystallization in 1050 Aluminum Hot-Rolled Sheets

Hideo Yoshida, Yoshimasa Ookubo

MATERIALS TRANSACTIONS· Volume 56· Issue 12

Abstract

It is well known that the recovery and recrystallization of commercially pure aluminum are influenced by the dissolved impurities, iron and silicon. In this study, we assumed that the dissolved impurities precipitate on the cell boundaries and subgrain boundaries during annealing and control the rate of recovery and recrystallization in the commercially pure aluminum and adopted a new rate equation developed by Yamamoto, which contains the term of the particle number that exponentially changes. It was found that the entire reaction was divided into two reactions, i.e., the recovery and recrystallization, which processes were analyzed by this equation. The entire reaction was expressed by superimposing the two processes. For the recovery process, the value of the time exponent is 0.5, which means control of the dislocation pipe diffusion, by which impurities precipitate on the dislocation cell boundaries. For the recrystallization process, the value of the time exponent is 1, which means control of the grain boundary diffusion, by which impurities precipitate on the subgrain boundaries. Therefore, our assumption was verified by this new equation. Based on the activation energy, we consider that the precipitation of silicon during the recovery and that of iron during the recrystallization control the reaction rate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research & Development Division (Nagoya), UACJ Corporation

UACJ Foundary & Forging Corporation

References (26)

Show source-provided references
1. 1) Y. Ohno and H. Nakamura: Aluminium 53 (1977) 539–542.
2. 2) S. Yamamoto, M. Mizuno and A. Kirihata: J. Japan Inst. Metals 56 (1992) 142–147.10.2320/jinstmet1952.56.2_142 ↗
3. 3) S. Yamamoto, A. Kirihata and M. Mizuno: J. Japan Inst. Metals 56 (1992) 757–763.10.2320/jinstmet1952.56.7_757 ↗
4. 4) T. Moriyama, H. Yoshida and S. Tsuchida: J. Japan Inst. Light Metals 39 (1989) 184–189.10.2464/jilm.39.184 ↗
5. 5) H. Yoshida, T. Moriyama and S. Tsuchida: Bull. Japan Inst. Metals 29 (1990) 309.
6. 6) M. Asano, T. Nakamura and H. Yoshida: J. Japan Inst. Light Metals 64 (2014) 279–284.10.2464/jilm.64.279 ↗
7. 7) T. Moriyama, H. Yoshida and S. Tsuchida: Sumitomo Light Metal Technical Reports 30 (1989) 1–7.
8. 8) R. Shoji and C. Fujikura: Furukawa Electric Review No. 84 (1989) 116–121.
9. 9) J. Burke: The Kinetics of Phase Transformation in Metals, (Pergamon Press, 1965) [in Japanese] translated by K. Hirano and H. Hori, (Kyoritu, 1972).
10. 10) J. W. Christian: The Theory of Transformation in Metals and Alloys, (Pergamon Press, 1965).
11. 11) F. J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Second Edition, (Elsevier, 2003) [in Japanese] translated by H. Kosuge, (Shizuoka Newspaper Company, 2005).
12. 12) K. G. F. Janssens, D. Raabe, E. Kozeschnik, M. A. Miodownik and B. Nestler: Computational Materials Engineering, An Introduction to Microstructure Evolution, (Elsevier Academic Press, 2007).
13. 13) S. Yamamoto: Trial of New Rate Theory, [in Japanese] (Showado, Kyoto, 1979).
14. 14) W. A. Johnson and R. F. Mehl: Trans. AIME 135 (1939) 416–458.
15. 15) M. Avrami: J. Chem. Phys. 7 (1939) 1103–1112.10.1063/1.1750380 ↗
16. 16) M. Avrami: J. Chem. Phys. 8 (1940) 212–224.10.1063/1.1750631 ↗
17. 17) M. Avrami: J. Chem. Phys. 9 (1941) 177–184.10.1063/1.1750872 ↗
18. 18) M. Koiwa: Bull. Japan Inst. Metals 25 (1986) 640–648.10.2320/materia1962.25.640 ↗
19. 19) S. Yamamoto and K. Kubota: J. Japan Inst. Metals 46 (1982) 917–924.10.2320/jinstmet1952.46.9_917 ↗
20. 20) K. Kubota and S. Yamamoto: J. Japan Inst. Metals 9 (1982) 908–916.10.2320/jinstmet1952.46.9_908 ↗
21. 21) H. Yoshida and S. Yamamoto: Proceedings of the 12th ICAA, JILM, Yokohama, (2010) pp. 1932–1937.
22. 22) Sumitomo Light Metal Technical Reports 51 (2010) 25–31.
23. 23) H. Yoshida: J. Japan Inst. Light Metals 41 (1991) 331–337.10.2464/jilm.41.331 ↗
24. 24) K. Hirano: J. Japan Inst. Light Metals 29 (1979) 249–262.10.2464/jilm.29.249 ↗
25. 25) H. Mehrer: Diffusion in Solids, (Springer, 2007) [in Japanese] translated by T. Fujikawa, (Maruzen, 2012) p. 640.10.1007/978-3-540-71488-0 ↗
26. 26) P. G. Shewmon: Diffusion in Solids, (McGraw-Hill Book Company, 1963) [in Japanese] translated by K. Fueki and K. Kitazawa, (CORONA Publishing, 1976).