Growth and Structural Characterizations of Nanostructured Chromium-Zirconium-Nitride Thin Films for Tribological Applications
Source abstract
Abstract
Nanostructured Cr-Zr-N thin films were grown on Si(100) substrates in a mixture of Ar and N2 plasma. The nitrogen partial pressure was varied to produce and control the stoichiometric forms obtained. All the Cr-Zr-N films exhibited a nanostructure with an average grain size of less than 10 nm, as determined by X-ray diffractogram analysis, and were formed in the solid-solution. As the contents of nitrogen in the film increased, it lead to changes in the crystal texture and competitive growth. The maximum root mean square roughness was 7.87 nm at a 20% nitrogen partial pressure and the roughness tended to decrease as the grain size decreased. The nano-indentation showed that the films grown at a 20% nitrogen partial pressure and annealed at 700°C had the highest reduced modulus and hardness at 349.2 and 35.1 GPa, respectively. The mechanical properties of films can be improved by a post-annealing heat treatment. With respect to the electrical properties of these films, the sheet resistance, which is related to the defect level, tended to increase as the nitrogen partial pressure increased.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nanoscience and Technology, Graduate School, Chulalongkorn University
Department of Physics, Faculty of Science, Burapa University
Department of Chemistry, Faculty of Science, Mahidol University
Center for Surface Science and Engineering, Faculty of Science, Mahidol University
Center of Innovative Nanotechnology, Chulalongkorn University
Department of Physics, Faculty of Science, Chulalongkorn University
References (21)
Show source-provided references
1. 1) J. Lin, Z. L. Wu, X. H. Zhang, B. Mishra, J. J. Moore and W. D. Sproul: Thin Solid Films 517 (2009) 1887–1894.10.1016/j.tsf.2008.09.093 ↗
2. 2) S. H. Shin, M. W. Kim, M. C. Kang, K. H. Kim, D. H. Kwon and J. S. Kim: Surf. Coat. Technol. 202 (2008) 5613–5616.10.1016/j.surfcoat.2008.06.128 ↗
3. 3) S. M. Aouadi, T. Maeruf, R. D. Twesten, D. M. Mihut and S. L. Rohde: Surf. Coat. Technol. 200 (2006) 3411–3417.10.1016/j.surfcoat.2005.02.169 ↗
4. 4) G. S. Kim, B. S. Kim, S. Y. Lee and J. H. Hahns: Surf. Coat. Technol. 200 (2005) 1669–1675.10.1016/j.surfcoat.2005.08.101 ↗
5. 5) R. Lamni, R. Sanjines, M. Parlinska-Wojtan, A. Karimi and F. Levy: J. Vac. Sci. Technol. A 23 (2005) 593–598.10.1116/1.1924579 ↗
6. 6) G. E. McGuire (Ed): Semiconductor Materials and Process Technology Handbook for Very Large Scale Integration (VLSI) and Ultra Large Scale Integration (ULSI), (Noyes Publications, New Jersey, 1988) p. 373.10.1016/B978-0-8155-1171-7.50019-6 ↗
7. 7) S. Hofmann: Thin Solid Films 191 (1990) 335–348.10.1016/0040-6090(90)90384-P ↗
8. 8) J. L. Ruan, J. L. Huang, J. S. Chen and D. F. Lii: Surf. Coat. Technol. 200 (2005) 652–1658.10.1016/j.surfcoat.2005.08.106 ↗
9. 9) P. Homhoul, C. Thavornthira, S. Chaiyakun and S. Tungasmita: J. Sci. Res. Chula Uni. 33 (2008) 43–49.
10. 10) G. Ababias: Surf. Coat. Technol. 202 (2008) 2223–2235.10.1016/j.surfcoat.2007.08.029 ↗
11. 11) L. Combadiere and J. Machet: Surf. Coat. Technol. 88 (1996) 17–27.10.1016/S0257-8972(96)02870-8 ↗
12. 12) S. Ulrich, H. Holleck, J. Ye, H. Leiste, R. Loos, M. Stuber, P. Pesch and S. Sattel: Thin Solid Films 437 (2003) 164–169.10.1016/S0040-6090(03)00595-9 ↗
13. 13) S. PalDey and S. C. Deevi: Mater. Sci. Eng. A 342 (2003) 58–79.10.1016/S0921-5093(02)00259-9 ↗
14. 14) G. E. McGuire (Ed): Semiconductor Materials and Process Technology Handbook for Very Large Scale Integration (VLSI) and Ultra Large Scale Integration (ULSI), (Noyes Publications, New Jersey, 1988) p. 415.10.1016/B978-0-8155-1171-7.50019-6 ↗
15. 15) Z. X. Song, Y. Wang, C. J. F. Wang, C. L. Liu and K. W. Xu: Surf. Coat. Technol. 202 (2007) 5412–5415.10.1016/j.surfcoat.2006.07.047 ↗
16. 16) R. D. Arnell, J. S. Colligon, K. F. Minnebaev and V. E. Yurasova: Vacuum 47 (1996) 425–431.10.1016/0042-207X(95)00241-3 ↗
17. 17) Y. K. Lee, J. Y. Kim, Y. K. Lee, M. S. Lee, D. K. Kim, D. Y. Jin, T. H. Nam, H. J. Ahn and D. K. Park: J. Crystal Growth 234 (2002) 498–504.10.1016/S0022-0248(01)01742-0 ↗
18. 18) L. Hulman, U. Helmersson, S. A. Barnett, J.-E. Sundgren and J. E. Greene: J. Appl. Phys. 61 (1987) 552–555.10.1063/1.338257 ↗
19. 19) D. William and Jr. Callister: Material Science and Engineering an Introduction 6 ed., (John Wiley&Sons, 2003) p. 77.
20. 20) L. Hultman: Vacuum 57 (2000) 1–30.10.1016/S0042-207X(00)00143-3 ↗
21. 21) P. K. Huang and J. W. Yeh: Surf. Coat. Technol. 203 (2009) 1891–1896.10.1016/j.surfcoat.2009.01.016 ↗