Characteration of Laser Cladded Fe-Mn-Cr Alloy Coatings Modified by Plasma Nitriding
Source abstract
Abstract
With the use of the high-performance precision mould, the requirements on the high speed, high reliable mould parts become more and more stringent. In order to further improve the surface wear resistance of moulds, Fe-Mn-Cr alloy coatings was prepared by a duplex treatment consisting of laser cladding followed by plasma nitriding. A dense structure coating with no cracks, pores or other defects were obtained after the duplex treatment, presenting a good metallurgical bonding to the substrate. After the duplex treatment, a nitride-layer of ξ-Fe2N+Cr2N and α-Fe with nitrogen were formed on the coating surface. The influence of the duplex treatment on the hardness and wear resistance of the cladding layer were investigated. The hardness of the coating significantly increased, with an average microhardness of 1788 HV, which ensured the wear resistance of the coating. Comparing with laser cladded coating, the samples with duplex treated coating dropped about 41% in wear rate, and performed a better wear resistance. The main wear mechanism of the samples with duplex treated coating was abrasive wear.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics
Zhejiang Provincial Key Laboratory for Cutting Tools, School of Mechanical Engineering, Taizhou University
References (15)
Show source-provided references
1. 1) L. Santo: Int. J. Surf. Sci. Eng. 2 (2008) 327–336. 10.1504/IJSURFSE.2008.02134510.1504/IJSURFSE.2008.021345 ↗
2. 2) Y. Chew, J. H. L. Pang, G. Bi and B. Song: J. Mater. Process. Tech. 224 (2015) 89–101. 10.1016/j.jmatprotec.2015.04.03110.1016/j.jmatprotec.2015.04.031 ↗
3. 3) H. Cheng, J. Yi, Z. G. Fang, S. Dai and X. R. Zhao: Mater. Trans. 54 (2013) 50–55. 10.2320/matertrans.M201223710.2320/matertrans.M2012237 ↗
4. 4) B. A. Obadele, P. A. Olubambi, A. Andrews, S. Pityana and M. T. Mathew: J. Alloy Compd. 646 (2015) 753–759. 10.1016/j.jallcom.2015.06.07910.1016/j.jallcom.2015.06.079 ↗
5. 5) H. Y. Wang, D. W. Zuo, M. D. Wang and J. B. Shao: Acta Metall. Sin. 45 (2009) 971–977.
6. 6) J. Y. Chen, K. Conlon, L. Xue and R. Rogge: Mater. Sci. Eng. A 527 (2010) 7265–7273. 10.1016/j.msea.2010.07.09810.1016/j.msea.2010.07.098 ↗
7. 7) C. Navas, A. Conde, B. J. Fernndez, F. Zubiri and J. de Damborenea: Surf. Coat. Technol. 194 (2005) 136–142. 10.1016/j.surfcoat.2004.05.00210.1016/j.surfcoat.2004.05.002 ↗
8. 8) R. Zenker, A. Buchwalder, K. Rüthrich, W. Griesbach and K. Nagel: Surf. Coat. Technol. 236 (2013) 58–62. 10.1016/j.surfcoat.2013.06.11810.1016/j.surfcoat.2013.06.118 ↗
9. 9) F. Haftlang, A. Habibolahzadeh and M. H. Sohi: Appl. Surf. Sci. 329 (2015) 240–247. 10.1016/j.apsusc.2014.12.14010.1016/j.apsusc.2014.12.140 ↗
10. 10) S. W. Huang, M. Samandi and M. Brandt: Surf. Coat. Technol. 153 (2002) 31–39. 10.1016/S0257-8972(01)01662-010.1016/S0257-8972(01)01662-0 ↗
11. 11) M. A. Béjar, W. Schnake, W. Saavedra and J. P. Vildósola: J. Mater. Process. Tech. 176 (2006) 210–213. 10.1016/j.jmatprotec.2006.03.16210.1016/j.jmatprotec.2006.03.162 ↗
12. 12) A. A. Peligrad, E. Zhou, D. Morton and L. Li: Surf. Coat. Technol. 150 (2002) 15–23. 10.1016/S0257-8972(01)01509-210.1016/S0257-8972(01)01509-2 ↗
13. 13) B. G. Guo, J. S. Zhou, S. T. Zhang, H. D. Zhou, Y. P. Pu and J. M. Chen: Mater. Sci. Eng. A 480 (2008) 404–410. 10.1016/j.msea.2007.07.01010.1016/j.msea.2007.07.010 ↗
14. 14) L. M. Luo, S. G. Liu, J. Yu, J. Luo and J. Li: T. Nonferr. Metal Soc. 20 (2010) 201–206. 10.1016/S1003-6326(09)60121-710.1016/S1003-6326(09)60121-7 ↗
15. 15) L. M. Luo, S. G. Liu, J. Li and Y. C. Wu: Surf. Coat. Technol. 205 (2011) 3467–3471. 10.1016/j.surfcoat.2010.12.01410.1016/j.surfcoat.2010.12.014 ↗