Effects of Crack Size Distribution and Specimen Length on the Correlation between n-Value and Critical Current in Heterogeneously Cracked Superconducting Tape
Source abstract
Abstract
A Monte Carlo simulation study was carried out to reveal the effects of crack size distribution and specimen length on the correlation between n-value and critical current in heterogeneously cracked superconducting tapes. First, it was shown that, with increasing distribution width of crack size, the distribution widths of critical current and n-values increase, and, the average critical current-value and average n-value of specimens decrease. Also, it was shown that the decrease in average n-value with increase in distribution width of crack size is more intense than the decrease in average critical current-value and this feature is more pronounced in longer specimens. Then it was revealed that plural n-values can exist for one critical current value since the n-value of specimen was dependent on the positional relation among the voltage-current curves of the sections, of which specimen is constituted. This phenomenon could be described by the difference in the resistance value in the current shunting circuit by application of a single equivalent crack-current shunting model in which the cracks within a specimen are replaced by a single equivalent crack. Based on this result, an approach, in which the resistance value in the current shunting circuit is used to describe the upper-lower bounds and the center of n-value in the correlation diagram between n-value and critical current, was presented. It was shown that the correlation diagrams at various distribution widths of crack size and specimen lengths, obtained by simulation and experiments, are described well by this approach.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Superconducting Materials and Applications · Fusion materials and technologies · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Elements Strategy Initiative for Structural Materials, Kyoto University
Department of Materials Science and Engineering, Kyoto University
References (21)
Show source-provided references
1. 1) K. Osamura, M. Sugano, S. Machiya, H. Adachi, S. Ochiai and M. Sato: Supercond. Sci. Technol. 22 (2009) 065001. 10.1088/0953-2048/22/6/06500110.1088/0953-2048/22/6/065001 ↗
2. 2) D.C. van der Laan, J.W. Ekin, F.F. Douglas, C.C. Clickner, T.C. Stauffer and L.F. Goodrich: Supercond. Sci. Technol. 23 (2010) 072001. 10.1088/0953-2048/23/7/07200110.1088/0953-2048/23/7/072001 ↗
3. 3) S. Ochiai, T. Arai, A. Toda, H. Okuda, M. Sugano, K. Osamura and W. Prusseit: J. Appl. Phys. 108 (2010) 063905. 10.1063/1.348801410.1063/1.3488014 ↗
4. 4) S. Ochiai, H. Okuda, T. Arai, S. Nagano, M. Sugano and W. Prusseit: Cryogenics 51 (2011) 584–590. 10.1016/j.cryogenics.2011.08.00310.1016/j.cryogenics.2011.08.003 ↗
5. 5) S. Ochiai, H. Okuda, T. Arai, M. Sugano, K. Osamura and W. Prusseit: J. Japan Inst. Copper, Copper and Copper Alloys 52 (2013) 225–230.
6. 6) H.-S. Shin, J. Marlon, H. Dedicatoria, H.-S. Kim, N.-J. Lee, H.-S. Ha and S.-S. Oh: IEEE Trans. Appl. Supercond. 21 (2011) 2997–3000. 10.1109/TASC.2010.209645010.1109/TASC.2010.2096450 ↗
7. 7) H. Oguro, T. Suwa, T. Suzuki, S. Awaji, K. Watanabe, M. Sugano, S. Machiya, M. Sato, T. Koganezawa, T. Machi, M. Yoshizumi and T. Izumi: IEEE Trans. Appl. Supercond. 23 (2013) 8400304. 10.1109/TASC.2012.223326410.1109/TASC.2012.2233264 ↗
8. 8) S. Ochiai, H. Okuda, M. Sugano, S.-S. Oh and H.-S. Ha: Mater. Trans. 55 (2014) 549–555. 10.2320/matertrans.MBW20130110.2320/matertrans.MBW201301 ↗
9. 9) S. Ochiai, H. Okuda and N. Fujii: Mater. Trans. 55 (2014) 1479–1487. 10.2320/matertrans.MAW20140110.2320/matertrans.MAW201401 ↗
10. 10) S. Ochiai, H. Okuda and N. Fujii: Mater. Trans. 56 (2015) 381–388. 10.2320/matertrans.MBW20140110.2320/matertrans.MBW201401 ↗
11. 11) J.K. Shin, S. Ochiai, H. Okuda, M. Sugano and S.-S. Oh: Supercond. Sci. Technol. 21 (2008) 115007. 10.1088/0953-2048/21/11/11500710.1088/0953-2048/21/11/115007 ↗
12. 12) S. Ochiai, M. Fujimoto, J.K. Shin, H. Okuda, S.S. Oh and D.W. Ha: J. Appl. Phys. 106 (2009) 103916. 10.1063/1.325940010.1063/1.3259400 ↗
13. 13) Y. Fang, S. Danyluk and M.T. Lanagan: Cryogenics 36 (1996) 957–962. 10.1016/S0011-2275(96)00069-010.1016/S0011-2275(96)00069-0 ↗
14. 14) S. Ochiai, H. Okuda, M. Sugano, K. Osamura, A. Otto and A.P. Malozemoff: Mater. Trans. 53 (2012) 1549–1555. 10.2320/matertrans.MAW20120110.2320/matertrans.MAW201201 ↗
15. 15) S. Ochiai, H. Okuda, H. Matsubayashi, K. Osamura and A. Otto: Mater. Trans. 57 (2016) 709–715. 10.2320/matertrans.MBW20150210.2320/matertrans.MBW201502 ↗
16. 16) N. Banno, D. Uglietti, B. Seeber, T. Takeuchi and R. Flükiger: Supercond. Sci. Technol. 18 (2005) 284–288. 10.1088/0953-2048/18/3/01310.1088/0953-2048/18/3/013 ↗
17. 17) Y. Miyoshi, E.P.A. Van Lanen, M.M. Dhalléand and N. Nijhuits: Supercond. Sci. Technol. 22 (2009) 085009. 10.1088/0953-2048/22/8/08500910.1088/0953-2048/22/8/085009 ↗
18. 18) H. Kitaguchi, H. Kumakura and K. Togano: Physica C 363 (2001) 198–201. 10.1016/S0921-4534(01)00960-110.1016/S0921-4534(01)00960-1 ↗
19. 19) H. Kitaguchi, A. Matsumoto, H. Hatakeyama and H. Kumakura: Physica C 401 (2004) 246–250. 10.1016/j.physc.2003.09.04710.1016/j.physc.2003.09.047 ↗
20. 20) S. Ochiai, H. Okuda and N. Fujii: Mater. Trans. 58 (2017) 679–687. 10.2320/matertrans.MBW20160210.2320/matertrans.MBW201602 ↗
21. 21) S. Ochiai, H. Okuda, M. Fujimoto and K. Osamura: Mater. Trans. 56 (2015) 1558–1564. 10.2320/matertrans.MAW20150110.2320/matertrans.MAW201501 ↗