journal article·2017Open access

In Situ Observation of Nonmetallic Inclusion Formation in NiTi Alloys

Fumiyoshi Yamashita, Masamitsu Wakoh, Koji Ishikawa, Hiroyuki Shibata

MATERIALS TRANSACTIONS· Volume 58· Issue 12

Abstract

It is well recognized that the fatigue characteristics of NiTi alloys are greatly influenced by the presence of nonmetallic inclusions. A high fatigue strength is required for the application of these alloys to medical devices, especially stents, to allow them to withstand the repeated processes of pulsation-induced expansion and contraction. In this study, the phases and morphology of the inclusions in commercially produced NiTi alloy were investigated. The inclusions in an as-cast ingot consisted of a single phase of Ti(C, O) and possessed a fiber shape with a diameter of about 0.5 µm, and were formed during the solidification of the NiTi alloy. In situ observation by confocal laser scanning microscopy revealed that the inclusions formed and grew in the region of residual melt (consisting of concentrated Ti, C, and O) during the solidification process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Technology Development Department, Special Metals Division, Furukawa Techno Material Co. Ltd.

Department of Mechanical Engineering and Robotics, School of Creative System Engineering, National Institute of Technology, Akita College

Institute of Multidisciplinary Research for Advanced Materials, Tohoku University

References (21)

Show source-provided references
1. 1) Metal Handbook, revised 6th edition, The Japan Institute of Metals and Materials, (Maruzen Co. Ltd., 2002) p. 780.
2. 2) D. Ito, N. Nishiwaki, K. Ueda and T. Narushima: J. Mater. Sci. 48 (2013) 359–366. 10.1007/s10853-012-6753-z10.1007/s10853-012-6753-z ↗
3. 3) T. Hanawa and T. Yoneyama: Metal Materials for Bio, (Corona Publishing Co. Ltd., 2007).
4. 4) T. Hanawa: Introduction of Metal Materials for Medicine, (The Japan Institute of Metals and Materials, 2010) p. 106.
5. 5) ASTM F2063-12: Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants, ASTM International, West Conshohocken, PA, (2012).
6. 6) J. Frenzel, K. Neuking and G. Eggeler: Materialwiss. Werkstofftech. 35 (2004) 352–358. 10.1002/mawe.20040072510.1002/mawe.200400725 ↗
7. 7) H. Shibata and T. Emi: Materia Japan 36 (1997) 809–813. 10.2320/materia.36.80910.2320/materia.36.809 ↗
8. 8) K. Takimoto, I. Taguchi and R. Matsumoto: J. Japan Inst. Met. Mater. 40 (1976) 834–838. 10.2320/jinstmet1952.40.8_83410.2320/jinstmet1952.40.8_834 ↗
9. 9) F. Kurosawa, I. Taguchi and R. Matsumoto: J. Japan Inst. Met. Mater. 43 (1979) 1068–1077. 10.2320/jinstmet1952.43.11_106810.2320/jinstmet1952.43.11_1068 ↗
10. 10) F. Kurosawa: Boshoku Gijutsu 37 (1988) 776–778.
11. 11) K. Yamada and R. Inoue: Tetsu-to-Hagané 100 (2014) 867–872. 10.2355/tetsutohagane.100.86710.2355/tetsutohagane.100.867 ↗
12. 12) M. Wakoh, T. Sawai, Y. Ueshima and S. Mizoguchi: CAMP-ISIJ 5 (1992) 233.
13. 13) M. Wakoh, T. Toh, K. Okazawa, S. Mizoguchi and Y. Tanaka: CAMP-ISIJ 7 (1993) 1172.
14. 14) M. Wakoh, T. Sawai and S. Mizoguchi: Tetsu-to-Hagané 82 (1996) 593–598. 10.2355/tetsutohagane1955.82.7_59310.2355/tetsutohagane1955.82.7_593 ↗
15. 15) B. Jiang, J. Xiao, K. Huang, J. Hou, S. Jiao and H. Zhu: J. Am. Ceram. Soc. 100 (2017) 2253–2265. 10.1111/jace.1461310.1111/jace.14613 ↗
16. 16) A. Toro, F. Zhou, M.H. Wu, W.V. Geertruyden and W.Z. Misiolek: J. Mater. Eng. Perform. 18 (2009) 448–458. 10.1007/s11665-009-9410-110.1007/s11665-009-9410-1 ↗
17. 17) G.M. Kramer: J. Mater. Eng. Perform. 18 (2009) 479–483. 10.1007/s11665-009-9438-210.1007/s11665-009-9438-2 ↗
18. 18) K. Ueda, Y. Wagatsuma, S. Aoki, T. Narushima, F. Yamashita and K. Ishikawa: Proc. of Symposium 2012 of the Japanese Society for Biomaterials, Sendai, (2012) p. 247.
19. 19) Binary Alloys Phase Diagrams second edition, ed. by T. B. Massalski, The Materials Information Society, ASM International, (1996).
20. 20) E. M. Levin, C. R. Robbins and H. F. McMurdie: Phase Diagrams for Ceramists, (The American Ceramic Society, Inc., 1964) p. 41.
21. 21) K. Narita: Tetsu-to-Hagané 52 (1966) 1098–1147. 10.2355/tetsutohagane1955.52.7_109810.2355/tetsutohagane1955.52.7_1098 ↗