Surface Properties of Intermetallic Compound Layer Formed on Titanium Alloy by AIH-FPP (Atmospheric Controlled Induction Heating Fine Particle Peening) Treatment
Source abstract
Abstract
The effect of the intermetallic compound layer formed by atmospheric controlled induction heating fine particle peening (AIH-FPP) treatment on the wear resistance and high-temperature oxidation resistance of titanium alloy was investigated. To form an intermetallic compound layer on a titanium alloy by AIH-FPP treatment, pure titanium, aluminum and nickel particles were mechanically milled using a planetary ball mill, and the prepared particles were used as shot particles in the AIH-FPP treatment. The results showed that intermetallic compound layers, consisted of Ti3Al and Ti2NiAl3, were formed on titanium alloy by AIH-FPP treatment using the prepared particles. The wear resistance and high-temperature oxidation resistance of the AIH-FPP treated specimen were higher than those of the untreated ones.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Surface Treatment and Residual Stress · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Integrated Design Engineering, Graduate School of Science and Technology, Keio University
Department of Mechanical Engineering, Faculty of Science and Technology, Keio University
Research and Development Center, Neturen Co., Ltd.
Neturen Co., Ltd.
References (17)
Show source-provided references
1. 1) T. Novoselova, S. Celotto, P. Morgan and W. O’Neill: J. Alloys Compd. 436 (2007) 69–77.10.1016/j.jallcom.2006.06.101 ↗
2. 2) T. Sonoda, T. Kuwashima, M. Nakamura, T. Saito and J. Yasuoka: J. Jpn. Weld. Soc. 28 (2010) 305–310.10.2207/qjjws.28.305 ↗
3. 3) G. Yang, H. Wang, C. Li and C. Li: Surf. Coat. Tech. 205 (2011) 5502–5509.10.1016/j.surfcoat.2011.06.033 ↗
4. 4) R. Xie, D. Li, G. Yang and C. Li: Mater. Sci. Technol. 29 (2013) 1125–1129.10.1179/1743284713Y.0000000289 ↗
5. 5) J. Komotori, Y. Kameyama, S. Kikuchi and H. Akebono: J. Jpn. Soc. Heat Treatment 54 (2014) 115–119.
6. 6) Y. Kameyama, Y. Amano, J. Komotori, K. Fukazawa, Y. Misaka and K. Kawasaki: J. Japan Inst. Metals 77 (2013) 7–13.10.2320/jinstmet.77.7 ↗
7. 7) Y. Kameyama, H. Takeshima, J. Komotori and K. Murasawa: J. Japan Inst. Met. Mater. 79 (2015) 452–460.10.2320/jinstmet.J2015028 ↗
8. 8) L. Peijie, E.G. Kandalova, A.G. Makarenko, V.I. Nikitin, Y. Zhang and A.R. Luts: Mater. Lett. 58 (2004) 1861–1864.10.1016/j.matlet.2003.12.002 ↗
9. 9) Y. Arakawa, M. Kobashi and N. Kanetake: Intermetallics 41 (2013) 22–27.10.1016/j.intermet.2013.04.004 ↗
10. 10) S. Saito, K. Suzuki, J. Komotori, K. Fukazawa, Y. Misaka and K. Kawasaki: J. Japan Inst. Met. Mater. 80 (2016) 562–569.10.2320/jinstmet.J2016005 ↗
11. 11) S. Saito, S. Takesue, J. Komotori, K. Fukazawa and Y. Misaka: J. Japan Inst. Met. Mater. 81 (2017) 295–300.10.2320/jinstmet.J2016063 ↗
12. 12) S. Saito, S. Takesue, J. Komotori, K. Fukazawa and Y. Misaka: J. Jpn. Soc. Abrasive Technol. 61 (2017) 145–150.
13. 13) T. Ito, S. Kikuchi, Y. Kameyama, J. Komotori, K. Fukazawa, Y. Misaka and K. Kawasaki: J. Japan Inst. Metals 74 (2010) 533–539.10.2320/jinstmet.74.533 ↗
14. 14) B. Gabbitas, P. Cao, S. Raynova and D. Zhang: J. Mater. Sci. 47 (2012) 1234–1243.10.1007/s10853-011-5886-9 ↗
15. 15) A. Hibino: J. Japan Inst. Metals 57 (1993) 767–773.10.2320/jinstmet1952.57.7_767 ↗
16. 16) T.W.B. Riyadi, T. Zhang, D. Marchant and X. Zhu: Surf. Coat. Tech. 258 (2014) 154–159.10.1016/j.surfcoat.2014.09.037 ↗
17. 17) H. Jiang, M. Hirohasi, H. Imanari and Y. Lu: Scr. Mater. 45 (2001) 253–259.10.1016/S1359-6462(01)00984-8 ↗