journal article·2018-11-01Open access

Laves Phase Precipitation Behavior and the Orientation Relationship with BCC in Cr–Mo–Nb System

Li Peng, Ken-ichi Ikeda, Toshiaki Horiuchi, Seiji Miura

MATERIALS TRANSACTIONS· Volume 59· Issue 11

Abstract

The isothermal sections of the Cr–Mo–Nb ternary phase diagram have been studied. The C15 NbCr2 Laves precipitation behavior in three different alloys has been investigated in the Cr–Mo–Nb ternary system. The orientation relationship (OR) of NbCr2 in BCC matrix among BCC/Laves two-phase alloys and Cr-rich BCC1/Mo-rich BCC2/Laves three-phase alloy is different at 1473 K; OR 1: (011)BCC // (111)C15], [011]BCC] // [110]C15] and OR 2: (411)BCC] // (111)C15, [011]BCC] // [110]C15] with low lattice mismatch are both observed in Cr-rich alloys #3 (74Cr–16Mo–10Nb) and #2 (50Cr–30Mo–20Nb). OR 3: (011)BCC // (111)C15, [111]BCC] // [011]C15] with a lattice mismatch relatively larger than that of OR 1 and OR 2 is only observed in alloy #2, which may be due to the presence of BCC1 and BCC2 interphases formed after BCC decomposition. Only discontinuous precipitation is observed at grain boundaries in Cr-lean alloy #1 (42Cr–31Mo–27Nb) without obvious OR between the BCC matrix and Laves phase.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate School of Materials Science and Engineering, Hokkaido University

Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University

Laboratory of Advanced Materials for Cold Region, Hokkaido University of Science

References (27)

Show source-provided references
1. 1) M. Takeyama and C.T. Liu: Mater. Sci. Eng. A 132 (1991) 61–66.10.1016/0921-5093(91)90361-P ↗
2. 2) J.D. Livingston: Phys. Status Solidi A 131 (1992) 415–423.10.1002/pssa.2211310215 ↗
3. 3) C.T. Liu, J. Stringer, J.N. Mundy, L.L. Horton and P. Angelini: Intermetallics 5 (1997) 579–596.10.1016/S0966-9795(97)00045-9 ↗
4. 4) G. Sauthoff: Intermetallics 8 (2000) 1101–1109.10.1016/S0966-9795(00)00045-5 ↗
5. 5) J.H. Zhu, C.T. Liu, L.M. Pike and P.K. Liaw: Intermetallics 10 (2002) 579–595.10.1016/S0966-9795(02)00030-4 ↗
6. 6) F. Stein, M. Palm and G. Sauthoff: Intermetallics 12 (2004) 713–720.10.1016/j.intermet.2004.02.010 ↗
7. 7) F. Stein, M. Palm and G. Sauthoff: Intermetallics 13 (2005) 1056–1074.10.1016/j.intermet.2004.11.001 ↗
8. 8) T. Yamanouchi and S. Miura: Mater. Trans. 59 (2018) 546–555.10.2320/matertrans.MJ201604 ↗
9. 9) T. Takasugi, M. Yoshida and S. Hanada: Acta Mater. 44 (1996) 669–674.10.1016/1359-6454(95)00174-3 ↗
10. 10) Q. Long, J. Wang, Y. Du, D. Holec, X. Nie and Z. Jin: Comput. Mater. Sci. 123 (2016) 59–64.10.1016/j.commatsci.2016.06.009 ↗
11. 11) Y. Nakagawa, T. Ohta, Y. Kaneno, H. Inoue and T. Takasugi: Metall. Mater. Trans. A 35 (2004) 3469–3476.10.1007/s11661-004-0184-7 ↗
12. 12) Y.L. Xue, S.M. Li, H. Zhong and H.Z. Fu: Mater. Sci. Eng. A 638 (2015) 340–347.10.1016/j.msea.2015.04.077 ↗
13. 13) D.J. Thoma, J.H. Perepezko, D.H. Plantz and R.B. Schwarz: Mater. Sci. Eng. A 179–180 (1994) 176–180.10.1016/0921-5093(94)90188-0 ↗
14. 14) K.C. Chen, S.M. Allen and J.D. Livingston: J. Mater. Res. 12 (1997) 1472–1480.10.1557/JMR.1997.0203 ↗
15. 15) M. Yoshida and T. Takasugi: Mater. Sci. Eng. A 224 (1997) 69–76.10.1016/S0921-5093(96)10551-7 ↗
16. 16) M. Yoshida and T. Takasugi: Mater. Sci. Eng. A 224 (1997) 77–86.10.1016/S0921-5093(96)10552-9 ↗
17. 17) K.S. Kumar and C.T. Liu: Acta Mater. 45 (1997) 3671–3686.10.1016/S1359-6454(97)00050-5 ↗
18. 18) J. Ventura, B. Portillo and S.K. Varma: J. Alloys Compd. 476 (2009) 257–262.10.1016/j.jallcom.2008.09.164 ↗
19. 19) M.I. Zakharova and D.A. Prokoshkin: Izv. Akad. Nauk SSSR, Otd. Tekh. Nauk, Metall, Topl. (1961) 59–67.
20. 20) F. Chu, Y.C. Lu, P.G. Kotula, T.E. Mitchell and D.J. Thoma: Philos. Mag. A 77 (1998) 941–956.10.1080/01418619808221221 ↗
21. 21) D.P. Pope and F.M. Chu: Philos. Mag. A 69 (1994) 409–420.10.1080/01418619408242221 ↗
22. 22) T. Takasugi and M. Yoshida: J. Mater. Res. 13 (1998) 2505–2513.10.1557/JMR.1998.0350 ↗
23. 23) K.S. Kumar and D.B. Miracle: Intermetallics 2 (1994) 257–274.10.1016/0966-9795(94)90012-4 ↗
24. 24) A. Bhowmik, K.M. Knowles and H.J. Stone: Intermetallics 31 (2012) 34–47.10.1016/j.intermet.2012.06.001 ↗
25. 25) B.L. Bramfitt: Metall. Trans. 1 (1970) 1987–1995.10.1007/BF02642799 ↗
26. 26) Y.S. Touloukian, R.K. Kirby, R.E. Taylor and P.D. Desal: Thermal Expansion: Metallic Elements and Alloys, (Plenum, New York, 1975).10.1007/978-1-4757-1622-1 ↗
27. 27) H.J. Goldschmidt and J.A. Brand: J. Less Common Met. 3 (1961) 44–61.10.1016/0022-5088(61)90042-X ↗