journal article·2018-12-01

Properties of Iron Core Fabricated from Flaky-Shaped and Annealed Pure Iron Powder

Masashi Hara, Masafumi Namba, Shin Tajima, Masaaki Tani, Takeshi Hattori, Yuji Kaneko

MATERIALS TRANSACTIONS· Volume 59· Issue 12
Publisher page

Abstract

To improve the properties of powder magnetic core for motors, such as iron loss, resistivity and strength, pure iron powder was deformed into flaky-shaped and then annealed to decrease strain by deformation. It was confirmed that the strength of iron core increased with increasing the aspect ratio of powder. However, the resistivity extremely decreased. The iron core showed properties as follows; density d = 7.66 Mg·m−3, resistivity ρ = 2.5 × 104 µΩ·m, iron loss Pc (the maximum magnetic flux density, Bmax = 1 T, frequency, f = 400 Hz) = 30 W·kg−1, iron loss Pc (Bmax = 1 T, f = 800 Hz) = 63 W·kg−1, radial crushing strength σ = 95 MPa. Especially, eddy current loss coefficient Ke was 0.008 mWs2·kg−1, extremely lower than electromagnetic steel sheet and powder magnetic core reported ever.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties and Applications · Magnetic Properties of Alloys · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Toyota Central R&D Labs., Inc.

References (49)

Show source-provided references
1. 1) T. Hattori, S. Tajima, M. Kondoh, M. Sugiyama, T. Yamaguchi, H. Kishimoto, S. Ohkouchi, T. Saito, S. Takemoto and Y. Fujita: Abstracts of Autumn Meeting JSPM, (2009) p. 99.
2. 2) S. Takemoto, Y. Fujita, T. Saito, T. Hattori, S. Tajima, M. Kondoh, M. Sugiyama, T. Yamaguchi, H. Kishimoto and S. Ohkouchi: Abstracts of Autumn Meeting JSPM, (2009) p. 100.
3. 3) K. Hidefumi, S. Ohkouchi, M. Sugiyama, T. Yamaguchi, T. Hattori, M. Tani, T. Suzuki, T. Saito, S. Takemoto and Y. Fujita: Abstracts of Autumn Meeting JSPM, (2009) p. 101.
4. 4) T. Hattori, M. Sugiyama, H. Kishimoto and T. Saito: Abstracts of Autumn Meeting JSPM, (2013) p. 80.
5. 5) S. Yamamoto, K. Kusawake, J. Ido, H. Kawaguchi, A. Ito and M. Kato: SEI Tech. Rev. 185 (2014) 29–33.
6. 6) N. Igarashi, M. Uozumi, T. Kosuge, A. Sato, K. Kusawake and K. Yamaguchi: SEI Tech. Rev. 186 (2015) 92–97.
7. 7) H. Hashimoto, K. Zaitsu, S. Hayashi, H. Mitani and K. Inoue: Kobe Steel Eng. Rep. 65 (2015) 16–20.
8. 8) T. Inagaki, C. Ishihara and N. Nakayama: Abstracts of Autumn Meeting JSPM, (2016) p. 191.
9. 9) Y. Kageyama, S. Kosaka, N. Hirose and J. Asami: Abstracts of Autumn Meeting JSPM, (2003) p. 118.
10. 10) C. Ishihara, K. Asaka, Y. Enomoto and M. Ito: Abstracts of Spring Meeting JSPM, (2005) p. 201.
11. 11) M. Ueta, S. Uenosono, N. Nakamura and J. Asami: Abstracts of Spring Meeting JSPM, (2005) p. 202.
12. 12) K. Mori, K. Kanagawa and R. Nakayama: Abstracts of Autumn Meeting JSPM, (2005) p. 138.
13. 13) K. Kanagawa, K. Mori and R. Nakayama: Abstracts of Autumn Meeting JSPM, (2005) p. 139.
14. 14) L. Pennander, G. Nord, K. Maezawa, M. Saito and K. Kanno: Abstracts of Autumn Meeting JSPM, (2005) p. 140.
15. 15) K. Kanagawa and K. Mori: Abstracts of Spring Meeting JSPM, (2006) p. 134.
16. 16) H. Oyama, T. Sonoda, T. Nishioka, T. Sawai and Y. Takeda: Abstracts of Spring Meeting JSPM, (2006) p. 136.
17. 17) M. Yokoi, N. Kamiya and T. Nakano: Abstracts of Autumn Meeting JSPM, (2006) p. 136.
18. 18) K. Hiramoto, S. Tajima, T. Hattori and Y. Inaguma: Abstracts of Autumn Meeting JSPM, (2006) p. 197.
19. 19) C. Ishihara, K. Asaka, Y. Enomoto and M. Ito: Abstracts of Autumn Meeting JSPM, (2006) p. 198.
20. 20) K. Kanagawa: Abstracts of Autumn Meeting JSPM, (2006) p. 199.
21. 21) H. Oyama, Y. Yamada, T. Nishioka, T. Sawai and S. Morimoto: Abstracts of Autumn Meeting JSPM, (2006) p. 200.
22. 22) H. Oyama, K. Kitajima, H. Toyoda, T. Nishioka, K. Kimura, T. Sawai and T. Sonoda: SEI Tech. Rev. 169 (2006) 79–81.
23. 23) M. Ueta, S. Uenosono, N. Nakamura and J. Asami: J. Jpn. Soc. Powder Powder Metall. 53 (2006) 297–303.10.2497/jjspm.53.297 ↗
24. 24) Y. Enomoto, M. Ito, R. Masaki and K. Asaka: IEE J Trans. Ind. Appl. 126 (2006) 1585–1590.10.1541/ieejias.126.1585 ↗
25. 25) C. Ishihara, T. Inagaki, K. Asaka, Y. Enomoto and M. Ito: Abstracts of Spring Meeting JSPM, (2007) p. 100.
26. 26) Y. Yamada, S. Ohashi, T. Ariyoshi, T. Sawai and S. Morimoto: J. Jpn. Soc. Powder Powder Metall. 54 (2007) 428–431.10.2497/jjspm.54.428 ↗
27. 27) T. Inagaki, C. Ishihara, Y. Enomoto and M. Ito: Abstracts of Autumn Meeting JSPM, (2009) p. 105.
28. 28) S. Kohnushi, Y. Okada and H. Dohmeki: Abstracts of Spring Meeting JSPM, (2010) p. 217.
29. 29) T. Miyamura, H. Mitani, H. Hojo and T. Kamijo: Abstracts of Autumn Meeting JSPM, (2011) p. 241.
30. 30) K. Inoue, H. Hashimoto, H. Hojo and S. Kasai: Abstracts of Spring Meeting JSPM, (2012) p. 148.
31. 31) M. Namba, K. Hiramoto and H. Nakai: Inst. Electr. Eng. Japan 135 (2015) 1085–1090.
32. 32) T. Ueno, A. Watanabe, K. Yamada, R. Tsunata and M. Takemoto: Abstracts of Autumn Meeting JSPM, (2016) p. 95.
33. 33) J. Shima and C. Ishihara: Abstracts of Spring Meeting JSPM, (2017) p. 144.
34. 34) Kobe Steel Website, http://www.kobelco.co.jp/products/powder/magmel.html.
35. 35) H. Hojo, N. Akagi, T. Sawayama and H. Mitani: Kobe Steel Eng. Rep. 60 (2010) 79–83.
36. 36) T. Maeda, H. Toyoda, N. Igarashi, K. Hirose, K. Mimura, T. Nishioka and A. Ikegaya: SEI Tech. Rev. 166 (2005) 1–6.
37. 37) N. Nakamura, Y. Ozaki and K. Higuchi: Kawasaki Steel Giho 33 (2001) 184–187.
38. 38) N. Nakamura, Y. Ozaki, M. Ueta and S. Uenosono: Abstracts of Spring Meeting JSPM, (2001) p. 121.
39. 39) M. Ueta, Y. Ozaki and S. Uenosono: Abstracts of Autumn Meeting JSPM, (2001) p. 140.
40. 40) S. Tajima, T. Hattori, M. Kondoh, H. Kishimoto, M. Sugiyama and T. Kikko: IEEE Trans. Magn. 41 (2005) 3280–3282.10.1109/TMAG.2005.854722 ↗
41. 41) S. Tajima, T. Hattori, M. Kondoh, H. Kishimoto, M. Sugiyama and T. Kikko: J. Jpn. Soc. Powder Powder Metall. 52 (2005) 164–170.10.2497/jjspm.52.164 ↗
42. 42) Japanese Patent No.4060101.
43. 43) Japanese Patent No.4589374.
44. 44) Japanese Patent No.4641299.
45. 45) Japanese Patent No.4837700.
46. 46) M. Kondoh and H. Okajima: Advances in Powder Metallurgy & Particulate Materials, (2002) 3-47–3-54.
47. 47) S. Tajima, T. Hattori, S. Hotta, M. Kondoh, O. Hiroshi, K. Higashiyama and H. Kishimoto: J. Jpn. Soc. Powder Powder Metall. 50 (2003) 577–583.10.2497/jjspm.50.577 ↗
48. 48) M. Kondoh: J. Jpn. Soc. Powder Powder Metall. 54 (2007) 506–512.10.2497/jjspm.54.506 ↗
49. 49) M. Kondoh and N. Matsumoto: J. Jpn. Soc. Technol. Plast. 58 (2017) 558–562.10.9773/sosei.58.558 ↗