Inoculant Fading-Resistance of Fe-Bearing Mg–3%Al Alloys Refined by Carbon Combining with Calcium Addition
Source abstract
Abstract
Mg–3%Al alloys containing different trace Fe contents were treated by carbon combining with Ca inoculation. The holding time after being inoculation was adjusted from 5 to 80 min. The effect of holding time on grain refinement and the structures of nucleating particles were systematically investigated. Significant grain refinement is obtained for the Mg–3%Al alloys containing trace Fe refined by carbon combining with Ca inoculation. The grain size keep stable with prolonging the holding time and exhibit significant fading-resistance. The duplex-phase particles of Al–Fe coated with Al–C-rich phase could be easily observed and they should actually act as potent nuclei for Mg grains. The Ca content in the Al–C-rich shell is obviously higher than that in the Mg matrix. The segregation of Ca on the surfaces of different phases contributes to the formation of duplex-phase particles and keeps the duplex phase structure particles stable. Consequently, no inoculant-fading of carbon-inoculation occurred due to the high stability of the duplex phase structure particles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, South China University of Technology
References (53)
Show source-provided references
1. 1) F.S. Pan, M.B. Yang and X.H. Chen: J. Mater. Sci. Technol. 32 (2016) 1211–1221.10.1016/j.jmst.2016.07.001 ↗
2. 2) X.J. Wang, D.K. Xu, R.Z. Wu, X.B. Chen, Q.M. Peng, L. Jin, Y.C. Xin, Z.Q. Zhang, Y. Liu, X.H. Chen, G. Chen, K.K. Deng and H.Y. Wang: J. Mater. Sci. Technol. 34 (2018) 245–247.10.1016/j.jmst.2017.07.019 ↗
3. 3) H. Yu, Y. Xin, M. Wang and Q. Liu: J. Mater. Sci. Technol. 34 (2018) 248–256.10.1016/j.jmst.2017.07.022 ↗
4. 4) Z.T. Jiang, B. Jiang, J.Y. Zhang, J.H. Dai, Q.S. Yang, Q. Yang and F.S. Pan: Trans. Nonferrous Met. Soc. China 26 (2016) 1284–1293.10.1016/S1003-6326(16)64229-2 ↗
5. 5) M. Sun, X. Hu, L. Peng, P. Fu and Y. Peng: Mater. Sci. Eng. A 620 (2015) 89–96.10.1016/j.msea.2014.09.106 ↗
6. 6) G. Han and X.F. Liu: Acta Mater. 114 (2016) 54–66.10.1016/j.actamat.2016.05.012 ↗
7. 7) P. Cao, M. Qian and D.H. StJohn: Scr. Mater. 56 (2007) 633–636.10.1016/j.scriptamat.2006.12.009 ↗
8. 8) D. Qiu, M.X. Zhang, J.A. Taylor, H.M. Fu and P.M. Kelly: Acta Mater. 55 (2007) 1863–1871.10.1016/j.actamat.2006.10.047 ↗
9. 9) P. Cao, M. Qian and D.H. StJohn: Scr. Mater. 51 (2004) 125–129.10.1016/j.scriptamat.2004.03.039 ↗
10. 10) A.M. Zhang, H. Hao and X.G. Zhang: Trans. Nonferrous Met. Soc. China 23 (2013) 3167–3172.10.1016/S1003-6326(13)62848-4 ↗
11. 11) J. Du, M.H. Wang, M. Zhou and W.F. Li: J. Alloys Compd. 592 (2014) 313–318.10.1016/j.jallcom.2013.11.196 ↗
12. 12) T. Wang, T. Gao, J. Nie, P. Li and X. Liu: Mater. Charact. 83 (2013) 13–20.10.1016/j.matchar.2013.06.002 ↗
13. 13) J. Du, Y. Shi, M. Zhou and W. Li: J. Mater. Sci. Technol. 32 (2016) 1297–1302.10.1016/j.jmst.2016.05.019 ↗
14. 14) U. Joshi and N.H. Babu: J. Alloys Compd. 695 (2017) 971–975.10.1016/j.jallcom.2016.10.215 ↗
15. 15) J. Gu, Y.D. Huang, M.X. Zhang, K.U. Kainer and N. Hort: Magnesium Technology 2017, (Springer International Publishing Ag, Cham, 2017) pp. 191–198.
16. 16) Z.H. Wang, X.L. Zhang, S.B. Li, K. Liu and W.B. Du: Mater. Sci. Forum 788 (2014) 98–102.10.4028/www.scientific.net/MSF.788.98 ↗
17. 17) M. Suresh, A. Srinivasan, U.T.S. Pillai and B.C. Pai: Procedia Eng. 55 (2013) 93–97.10.1016/j.proeng.2013.03.225 ↗
18. 18) M. Yang, F. Pan, R. Cheng and A. Tang: Mater. Sci. Eng. A 491 (2008) 440–445.10.1016/j.msea.2008.02.017 ↗
19. 19) K. Li, F. Wang, Q. Wang and N.G. Zhou: Journal of Shanghai Jiaotong University (Science) 17 (2012) 301–305.10.1007/s12204-012-1273-1 ↗
20. 20) M. Qian and P. Cao: Scr. Mater. 52 (2005) 415–419.10.1016/j.scriptamat.2004.10.014 ↗
21. 21) Y. Ali, D. Qiu, B. Jiang, F. Pan and M.X. Zhang: J. Alloys Compd. 619 (2015) 639–651.10.1016/j.jallcom.2014.09.061 ↗
22. 22) M.X. Zhang, P.M. Kelly, M. Qian and J.A. Taylor: Acta Mater. 53 (2005) 3261–3270.10.1016/j.actamat.2005.03.030 ↗
23. 23) G. Han and X. Liu: J. Alloys Compd. 487 (2009) 194–197.10.1016/j.jallcom.2009.08.037 ↗
24. 24) Y. Tamura, T. Haitani, E. Yano, T. Motegi, N. Kono and E. Sato: Mater. Trans. 43 (2002) 2784–2788.10.2320/matertrans.43.2784 ↗
25. 25) J. Du, M. Wang and W. Li: J. Alloys Compd. 502 (2010) 74–79.10.1016/j.jallcom.2010.04.156 ↗
26. 26) F. Pan, X. Chen, T. Yan, T. Liu, J. Mao, W. Luo, Q. Wang, J. Peng, A. Tang and B. Jiang: Journal of Magnesium and Alloys 4 (2016) 8–14.10.1016/j.jma.2016.02.003 ↗
27. 27) J. Du, H.L. Wang, M.C. Zhou and W.F. Li: Trans. Nonferrous Met. Soc. China 23 (2013) 307–314.10.1016/S1003-6326(13)62462-0 ↗
28. 28) Y. Pan: J. Mater. Sci. Technol. 21 (2005) 2005.
29. 29) S. Kim, S.L. Cockcroft and A.M. Omran: J. Alloys Compd. 476 (2009) 728–732.10.1016/j.jallcom.2008.09.082 ↗
30. 30) P. Chaengkham and P. Srichandr: J. Mater. Process. Technol. 211 (2011) 1372–1378.10.1016/j.jmatprotec.2011.03.008 ↗
31. 31) Y. Birol: J. Alloys Compd. 513 (2012) 150–153.10.1016/j.jallcom.2011.10.010 ↗
32. 32) T.M. Wang, H.W. Fu, Z.N. Chen, J. Xu, J. Zhu, F. Cao and T.J. Li: J. Alloys Compd. 511 (2012) 45–49.10.1016/j.jallcom.2011.09.009 ↗
33. 33) A.W. Yu, C.G. Yang, F.C. Liu, Q. Zheng, Y.F. Liao and H. Chen: Rare Met. Mater. Eng. 44 (2015) 1964–1969.
34. 34) T. Kanno, Y. Iwami and I. Kang: Int. J. Metalcast. 11 (2017) 94–100.10.1007/s40962-016-0111-x ↗
35. 35) M. Chakraborty, G.S.V. Kumar and B.S. Murty: Trans. Indian Inst. Met. 58 (2005) 661–670.
36. 36) T.J. Chen, X.D. Jiang, Y. Ma, R.Q. Wang and Y. Hao: Mater. Res. 14 (2011) 124–133.10.1590/S1516-14392011005000017 ↗
37. 37) T.J. Chen, Y. Ma, W.B. Lv, Y.D. Li and Y. Hao: J. Mater. Sci. 45 (2010) 6732–6738.10.1007/s10853-010-4767-y ↗
38. 38) J. Du and M.H. Wang: J. Mater. Eng. 44 (2016) 54–58.
39. 39) M. Yamasaki, K. Hashimoto, K. Hagihara and Y. Kawamura: Acta Mater. 59 (2011) 3646–3658.10.1016/j.actamat.2011.02.038 ↗
40. 40) T. Ito, M. Noda, H. Mori, Y. Gonda and Y. Fukuda: Mater. Trans. 55 (2014) 1184–1189.10.2320/matertrans.MC201401 ↗
41. 41) A. Standard, Standard Test Methods for Determining Average Grain Size, 3 (ASTM Pub., Pennsylvania, USA, 1993) pp. 297–322.
42. 42) Y.Z. Zhao, X.T. Liu and H. Hao: Acta Metall. Sin. (Engl. Lett.) 30 (2017) 505–512.10.1007/s40195-017-0556-9 ↗
43. 43) Y. Huang, K.U. Kainer and N. Hort: Scr. Mater. 64 (2011) 793–796.10.1016/j.scriptamat.2011.01.005 ↗
44. 44) Y. Ali, D. Qiu, B. Jiang, F. Pan and M.X. Zhang: Scr. Mater. 114 (2016) 103–107.10.1016/j.scriptamat.2015.12.015 ↗
45. 45) S.S. Li, B. Tang and D.B. Zeng: J. Alloys Compd. 437 (2007) 317–321.10.1016/j.jallcom.2006.07.117 ↗
46. 46) Emley, Principles of Magnesium Technology, (Pergamon Press, 1966).
47. 47) P. Cao, M. Qian, D.H. StJohn and M.T. Frost: Mater. Sci. Technol. 20 (2004) 585–592.10.1179/026708304225012314 ↗
48. 48) Y. Tamura, T. Motegi, N. Kono and E. Sato: Mater. Sci. Forum 350–351 (2000) 199–204.10.4028/www.scientific.net/MSF.350-351.199 ↗
49. 49) P. Cao, M. Qian and D.H. StJohn: Scr. Mater. 53 (2005) 841–844.10.1016/j.scriptamat.2005.06.010 ↗
50. 50) M.Q.a.D.S. Peng Cao: Magnesium Technology, (The Minerals, Metals and Materials Society, Warrendale, PA, 2005) pp. 297–302.
51. 51) J. Du, J. Yang, M. Kuwabara, W. Li and J. Peng: Mater. Trans. 48 (2007) 2903–2908.10.2320/matertrans.MRA2007098 ↗
52. 52) In Binary Systems. Part 1 Elements and Binary Systems from Ag-Al to Au-Tl, (Springer Berlin Heidelberg, Berlin, Heidelberg, 2002) pp. 122–124.
53. 53) M.A. Easton and D.H. StJohn: Acta Mater. 49 (2001) 1867–1878.10.1016/S1359-6454(00)00368-2 ↗