journal article·2019-09-01Open access

Low Springback and Low Young’s Modulus in Ti–29Nb–13Ta–4.6Zr Alloy Modified by Mo Addition

Qiang Li, Qiang Qi, Junjie Li, Masaaki Nakai, Mitsuo Niinomi, Yuichiro Koizumi, Daixiu Wei, Kenta Yamanaka, Takayoshi Nakano, Akihiko Chiba, Xuyan Liu, Deng Pan

MATERIALS TRANSACTIONS· Volume 60· Issue 9

Abstract

Deformation-induced higher Young’s modulus can satisfy the contradictory requirements of Ti alloys for spinal-fixation applications, which demand a high Young’s modulus to reduce springback during operations and a low Young’s modulus to prevent stress shielding effect for patients after surgeries. In this study, TNTZ–(1, 3, 5)Mo are designed by adding Mo and Ti to Ti–29Nb–13Ta–4.6Zr (TNTZ) in order to maintain low initial Young’s modulus and achieve low springback. All the solutionized alloys show single β phase with increasing the β stability by Mo addition. They show low Young’s moduli less than 65 GPa, similar ultimate tensile strength of 650 MPa and elongation around 20%. The springback of TNTZ–3Mo and TNTZ–5Mo is lower than that of TNTZ and TNTZ–1Mo owing to their more stable β phase. After cold rolling, TNTZ–3Mo shows the largest increasing ratio of 25% in Young’s modulus and the highest ultimate tensile strength owning to the appearance of deformation-induced ω phase. With the low initial Young’s modulus of 59 GPa, TNTZ–3Mo is a potential candidate to make the spinal rods in spinal fixation devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, University of Shanghai for Science and Technology

International Iberian Nanotechnology Laboratory

Department of Mechanical Engineering, Faculty of Science and Engineering, Kindai University

Institute for Materials Research, Tohoku University

Department of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University

Department of Materials Science and Engineering, Graduate School of Science and Technology, Meijo University

Materials Genome Institute, Shanghai University

References (32)

Show source-provided references
1. 1) M. Niinomi: Metall. Mater. Trans. A 33 (2002) 477–486.10.1007/s11661-002-0109-2 ↗
2. 2) M. Abdel-Hady and M. Niinomi: J. Mech. Behav. Biomed. Mater. 20 (2013) 407–415.10.1016/j.jmbbm.2012.11.014 ↗
3. 3) S. Mukhtar, W. Asghar, Z. Butt, Z. Abbas, M. Ullah and R. Atta-Ur-Rehman: J. Cent. South Univ. 25 (2018) 2578–2588.10.1007/s11771-018-3937-y ↗
4. 4) M. Niinomi, M. Nakai and J. Heida: Acta Biomater. 8 (2012) 3888–3903.10.1016/j.actbio.2012.06.037 ↗
5. 5) M. Niinomi: Mater. Trans. 59 (2018) 1–13.
6. 6) M. Mikulewicz and K. Chojnacka: Biol. Trace Elem. Res. 142 (2011) 865–889.10.1007/s12011-010-8798-7 ↗
7. 7) J. Sevcikova and M.P. Goldbergova: Biometals 30 (2017) 163–169.10.1007/s10534-017-0002-5 ↗
8. 8) T. Hanawa: J. Artif. Organs 12 (2009) 73–79.10.1007/s10047-008-0456-x ↗
9. 9) J. Domingo: Biol. Trace Elem. Res. 88 (2002) 97–112.10.1385/BTER:88:2:097 ↗
10. 10) M. Fellah, L. Aissani, M.A. Samad, A. Iost, T.M. Zine, A. Montagne and C. Nouveau: Acta Metall. Sin. (Engl. Lett.) 30 (2017) 1089–1099.10.1007/s40195-017-0652-x ↗
11. 11) J.Y. Rho, T.Y. Tsui and G.M. Pharr: Biomaterials 18 (1997) 1325–1330.10.1016/S0142-9612(97)00073-2 ↗
12. 12) N. Sumitomo, K. Noritake, T. Hattori, K. Morikawa, S. Niwa, K. Sato and M. Niinomi: J. Mater. Sci. 19 (2008) 1581–1586.
13. 13) M. Morinaga: Mater. Trans. 57 (2016) 213–226.10.2320/matertrans.M2015418 ↗
14. 14) T. Morita, N. Uehigashi and C. Kagaya: Mater. Trans. 54 (2013) 22–27.10.2320/matertrans.M2012262 ↗
15. 15) Q. Li, M. Niinomi, J. Hieda, M. Nakai and K. Cho: Acta Biomater. 9 (2013) 8027–8035.10.1016/j.actbio.2013.04.032 ↗
16. 16) J.P. Steib, R. Dumas, D. Mitton and W. Skall: Spine. 29 (2004) 193–199.10.1097/01.BRS.0000107233.99835.A4 ↗
17. 17) M. Nakai, M. Niinomi, X.F. Zhao and X.L. Zhao: Mater. Lett. 65 (2011) 688–690.10.1016/j.matlet.2010.11.006 ↗
18. 18) R.M. Wood: Mater. Lett. 65 (2011) 688–690.
19. 19) Y. Shinohara, M. Tahara, T. Inamura, S. Miyazaki and H. Hosoda: Mater. Trans. 56 (2015) 404–409.10.2320/matertrans.M2014439 ↗
20. 20) X.F. Zhao, M. Niinomi, M. Nakai and J. Hieda: Acta Biomater. 8 (2012) 1990–1997.10.1016/j.actbio.2012.02.004 ↗
21. 21) X.F. Zhao, M. Niinomi, M. Nakai, J. Hieda, T. Ishimoto and T. Nakano: Acta Biomater. 8 (2012) 2392–2400.10.1016/j.actbio.2012.02.010 ↗
22. 22) Q. Li, J.J. Li, G.H. Ma, X.Y. Liu and D. Pan: Mater. Des. 111 (2016) 421–428.10.1016/j.matdes.2016.09.026 ↗
23. 23) H.H. Liu, M. Niinomi, M. Nakai, K. Cho and H. Fujii: Scr. Mater. 130 (2017) 27–31.10.1016/j.scriptamat.2016.10.036 ↗
24. 24) Y.L. Hao, R. Yang, M. Niinomi, D. Kuroda, Y.L. Zhou, K. Fukunaga and A. Suzuki: Metall. Mater. Trans. A 34 (2003) 1007–1012.10.1007/s11661-003-0230-x ↗
25. 25) X.L. Zhao, M. Niinomi, M. Nakai, G. Miyamoto and T. Furuhara: Acta Biomater. 7 (2011) 3230–3236.10.1016/j.actbio.2011.04.019 ↗
26. 26) A.K. Shanker, C. Cervantes, L.T. Herminia and S. Avudainayagam: Environ. Int. 31 (2005) 739–753.10.1016/j.envint.2005.02.003 ↗
27. 27) T. Zhou, M. Aindow, S.P. Alpay, M.J. Blackburn and M.H. Wu: Scr. Mater. 50 (2004) 343–348.10.1016/j.scriptamat.2003.10.012 ↗
28. 28) E. Bertrand, P. Castany, I. Péron and T. Gloriant: Scr. Mater. 64 (2011) 1110–1113.10.1016/j.scriptamat.2011.02.033 ↗
29. 29) M.J. Lai, C.C. Tasan and D. Raabe: Acta Mater. 111 (2016) 173–186.10.1016/j.actamat.2016.03.040 ↗
30. 30) S. Hanada, N. Masahashi and T.K. Jung: Mater. Sci. Eng. A 588 (2013) 403–410.10.1016/j.msea.2013.09.053 ↗
31. 31) S. Gorsse, Y. Le Petitcorps, S. Matar and F. Rebillat: Mater. Sci. Eng. A 340 (2003) 80–87.10.1016/S0921-5093(02)00188-0 ↗
32. 32) M. Marteleur, F. Sun, T. Gloriant, P. Vermaut, P.J. Jacques and F. Prima: Scr. Mater. 66 (2012) 749–752.10.1016/j.scriptamat.2012.01.049 ↗