Direct In Situ Observation of Deformation Modes in Wedge Indentation of Metals
Source abstract
Abstract
We study deformation patterns in wedge indentation of annealed metals (e.g., copper) using high-resolution, in situ imaging and image correlation. Based on attributes of the deformation such as velocity fields, grid distortion and strain distributions, we discriminate between two modes of deformation — a cutting mode with narrow-angle (sharp) wedges, e.g., apex angle of 30°, and a radial-compression mode with wide-angle (blunt) wedges, e.g. apex angle of 120°. The cutting mode is characterized by significant material flow parallel to the wedge face; and a thin region of very high strain (∼3), that is located immediately adjacent to the indenter face (wall-layer), and arises from friction-induced deformation. The radial-compression mode is distinguished by material flow normal to and away from the indenter face, with negligible velocity component parallel to the indenter face. The corresponding strain field is one of bulk deformation, with the highly-strained region (strain ∼1) being of semicircular shape that extends from near the edge of indenter contact at the specimen surface, to well below the indenter tip. The observations show that indenter wall friction is likely to have a major influence on the deformation field only with narrow-angle indenters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Materials Processing and Tribology
Department of Civil Engineering, Indian Institute of Science
Department of Mechanical Engineering, Osaka University
References (32)
Show source-provided references
1. 1) D. Tabor: The Hardness of Metals, (Clarendon Press, Oxford, 1951).
2. 2) H. O’Neill: The Hardness of Metals and its Measurement, 2nd ed., (Chapman and Hall, London, 1967).
3. 3) W.C. Oliver and G.M. Pharr: J. Mater. Res. 7 (1992) 1564–1583.10.1557/JMR.1992.1564 ↗
4. 4) R.F. Bishop, R. Hill and N.F. Mott: Proc. Phys. Soc. 57 (1945) 147.10.1088/0959-5309/57/3/301 ↗
5. 5) R. Hill, E.H. Lee and S.J. Tupper: Proc. R. Soc. London, Ser. A 188 (1947) 273.10.1098/rspa.1947.0009 ↗
6. 6) D.S. Dugdale: J. Mech. Phys. Solids 2 (1953) 14.10.1016/0022-5096(53)90023-4 ↗
7. 7) T.O. Mulhearn: J. Mech. Phys. Solids 7 (1959) 85.10.1016/0022-5096(59)90013-4 ↗
8. 8) J.B. Haddow: Int. J. Mech. Sci. 9 (1967) 159.10.1016/0020-7403(67)90026-4 ↗
9. 9) W. Hirst and M.G.J.W. Howse: Proc. R. Soc. London, Ser. A 311 (1969) 429.10.1098/rspa.1969.0126 ↗
10. 10) K.L. Johnson: J. Mech. Phys. Solids 18 (1970) 115.10.1016/0022-5096(70)90029-3 ↗
11. 11) M.M. Chaudhri: Philos. Mag. Lett. 67 (1993) 107.10.1080/09500839308243860 ↗
12. 12) M.M. Chaudhri: Philos. Mag. A 74 (1996) 1213.10.1080/01418619608239721 ↗
13. 13) J.W. Kysar, Y.X. Gan, T.L. Morse, X. Chen and M.E. Jones: J. Mech. Phys. Solids 55 (2007) 1554.10.1016/j.jmps.2006.09.009 ↗
14. 14) T. Ohmura, A.M. Minor, E.A. Stach and J.W. Morris: J. Mater. Res. 19 (2004) 3626–3632.10.1557/JMR.2004.0474 ↗
15. 15) J.A. Schey: Tribology in Metal Working, (American Society of Metals, OH, 1983).
16. 16) N. Sundaram, Y. Guo and S. Chandrasekar: MRS Commun. 2 (2012) 47–50.10.1557/mrc.2012.6 ↗
17. 17) N. Sundaram, Y. Guo and S. Chandrasekar: Phys. Rev. Lett. 109 (2012) 106001.10.1103/PhysRevLett.109.106001 ↗
18. 18) Y. Guo, W.D. Compton and S. Chandrasekar: Proc. R. Soc. London, Ser. A 471 (2015) 20150194.10.1098/rspa.2015.0194 ↗
19. 19) H. Yeung, K. Viswanathan, A. Udupa, A. Mahato and S. Chandrasekar: Phys. Rev. Appl. 8 (2017) 054044.10.1103/PhysRevApplied.8.054044 ↗
20. 20) R.J. Adrian and J. Westerweel: Particle Image Velocimetry, (Cambridge University Press, Cambridge, 2011).
21. 21) H. Yeung, K. Viswanathan, W.D. Compton and S. Chandrasekar: Proc. Natl. Acad. Sci. USA 112 (2015) 9828–9832.10.1073/pnas.1509165112 ↗
22. 22) M.C. Shaw: Metal Cutting Principles, (Oxford University Press, Oxford, 1984).
23. 23) R. Hill: J. Mech. Phys. Solids 1 (1953) 265–270.10.1016/0022-5096(53)90006-4 ↗
24. 24) L.E. Samuels and T.O. Mulhearn: J. Mech. Phys. Solids 5 (1957) 125–134.10.1016/0022-5096(57)90056-X ↗
25. 25) T. Sugihara, A. Udupa and K. Viswanathan: Mater. Trans. 60 (2019) https://doi.org/10.2320/matertrans.MD201907.10.2320/matertrans.MD201907 ↗
26. 26) S. Biwa and B. Storåkers: J. Mech. Phys. Solids 43 (1995) 1303–1333.10.1016/0022-5096(95)00031-D ↗
27. 27) A. Bhattacharya and W. Nix: Int. J. Solids Struct. 24 (1988) 881–891.10.1016/0020-7683(88)90039-X ↗
28. 28) A. Giannakopoulos, P.L. Larsson and R. Vestergaard: Int. J. Solids Struct. 31 (1994) 2679–2708.10.1016/0020-7683(94)90225-9 ↗
29. 29) K. Jayadevan and R. Narasimhan: Comput. Struct. 57 (1995) 915–927.10.1016/0045-7949(94)00557-J ↗
30. 30) M. Mata and J. Alcala: J. Mech. Phys. Solids 52 (2004) 145–165.10.1016/S0022-5096(03)00075-9 ↗
31. 31) E. Hazell: Ph.D. thesis, University of Oxford, (2008).
32. 32) N.K. Sundaram: Philosophical Magazine (2019) Under Review.