Dependences of Grain Size and Strain-Rate on Deformation Behavior of Commercial Purity Titanium Processed by Multi-Directional Forging
Source abstract
Abstract
Strain rate dependencies of deformation behavior of commercial purity titanium specimens having different grain sizes were systematically investigated. Ultrafine-grained titanium with an average grain size of 0.07 µm (UFG-Ti) fabricated by multi-directional forging followed by conventional thermo-mechanical processing, and fine-grained (FG-Ti) and coarse-grained (CG-Ti) specimens with an average grain sizes of 0.8 and 12 µm attained by its, respectively, annealing at 773 and 973 K for 1.8 ks were prepared. The FG- and UFG-Ti specimens exhibited strong strain-rate dependence of 0.2% proof stress, while that of CG-Ti ones were almost constant regardless of applied strain-rate. In-situ X-ray diffraction measurements during tensile tests were also conducted at synchrotron radiation facility, SPring-8. Using the modified Williamson-Hall and the modified Warren-Averbach methods, the activated slip systems and change in dislocation density during deformation were estimated. As a result, it was found that 〈a〉 and 〈c + a〉 slips were activated in FG- and UFG-Ti specimens. On the other hand, the activation of 〈c + a〉 slip was never observed in the CG-Ti ones. It can be, thus, concluded that the different strain-rate dependency of deformation behaviors of specimens with different grain sizes were ascribed to the difference in the deformation mechanisms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Mechanical Science and Engineering, Graduate School of Natural Science and Technology, Kanazawa University
Division of Mechanical Engineering, Institute of Science and Engineering, Kanazawa University
Japan Atomic Energy Agency
Department of Mechanical Engineering, Toyohashi University of Technology
References (36)
Show source-provided references
1. 1) K. Ida: Jpn. J. Med. Electron. Biol. Eng. 24 (1986) 47–54.
2. 2) Y. Okazaki: Bull. Jpn. Inst. Met. 37 (1998) 838–842.
3. 3) M. Semlitsch, F. Staub and H. Weber: Biomed. Tech. 30 (1985) 334–339.10.1515/bmte.1985.30.12.334 ↗
4. 4) M. Maki: Bull. Jpn. Inst. Met. 27 (1988) 623–630.10.2320/materia1962.27.623 ↗
5. 5) J. Xing, X. Yang, H. Miura and T. Sakai: Mater. Trans. 49 (2008) 69–75.10.2320/matertrans.ME200705 ↗
6. 6) N. Tsuji, Y. Ito, Y. Saito and Y. Minamino: Scr. Mater. 47 (2002) 893–899.10.1016/S1359-6462(02)00282-8 ↗
7. 7) H. Miura, G. Yu and X. Yang: Mater. Sci. Eng. 528 (2011) 6981–6992.10.1016/j.msea.2011.05.050 ↗
8. 8) S. Hanada: Tetsu-to-Hagané 76 (1990) 495–502.10.2355/tetsutohagane1955.76.4_495 ↗
9. 9) D. Terada, S. Inoue and N. Tsuji: J. Mater. Sci. 42 (2007) 1673–1681.10.1007/s10853-006-0909-7 ↗
10. 10) B. Wang, X. Wang and J. Li: J. Mater. Eng. Perform. 25 (2016) 2521–2527.10.1007/s11665-016-2079-3 ↗
11. 11) P. Rodriguez-Calvillo and J.M. Cabrera: Mater. Sci. Eng. 625 (2015) 311–320.10.1016/j.msea.2014.11.082 ↗
12. 12) N.P. Gurao, M. Geetha, P. Govindaraj, R. Asokamani and S. Suwas: Metall. Mater. Trans. A 44 (2013) 5602–5610.10.1007/s11661-013-1910-9 ↗
13. 13) H. Miura and M. Kobayashi: TITANIUM JAPAN 62 (2014) 191–193.
14. 14) N. Hoshi, M. Sita, T. Kumasaka, M. Banka, H. Miura and K. Kimoto: J. Japan. Soc. Dent. Mater. Dev. 32 (2013) 403.
15. 15) Y.M. Wang and E. Ma: Appl. Phys. Lett. 83 (2003) 3165–3167.10.1063/1.1618370 ↗
16. 16) Q. Wei, S. Cheng, K.T. Ramesh and E. Ma: Mater. Sci. Eng. 381 (2004) 71–79.10.1016/j.msea.2004.03.064 ↗
17. 17) F.H. Dalla Torre, E.V. Pereloma and C.H.J. Davies: Scr. Mater. 51 (2004) 367–371.10.1016/j.scriptamat.2004.05.021 ↗
18. 18) F.H. Dalla Torre, E.V. Pereloma and C.H.J. Davies: Acta Mater. 54 (2006) 1135–1146.10.1016/j.actamat.2005.10.041 ↗
19. 19) M. Kato, T. Fujii and S. Onaka: Mater. Trans. 49 (2008) 1278–1283.10.2320/matertrans.MRA2008012 ↗
20. 20) M. Kato: Mater. Sci. Eng. 516 (2009) 276–282.10.1016/j.msea.2009.03.035 ↗
21. 21) I.C. Choi, D.H. Lee, B. Ahn, K. Durst, M. Kawasaki, T.G. Langdond and J. Janga: Scr. Mater. 94 (2015) 44–47.10.1016/j.scriptamat.2014.09.014 ↗
22. 22) C. Watanabe, R. Monzen, R. Ueji and H. Miura: Metall. Mater. Trans. A 48 (2017) 5368–5375.10.1007/s11661-017-4303-7 ↗
23. 23) L. Saitova, I. Semenova, H.W. Höppel, R. Valiev and M. Göken: Materialwiss. Werkstofftech. 39 (2008) 367–370.10.1002/mawe.200800308 ↗
24. 24) Y. Miyajima, S. Okubo, T. Miyazawa, H. Adachi and T. Fujii: Philos. Mag. Lett. 96 (2016) 294–304.10.1080/09500839.2016.1218563 ↗
25. 25) T. Ungár, J. Gubicza, G. Ribárik and A. Brobely: J. Appl. Cryst. 34 (2001) 298–310.10.1107/S0021889801003715 ↗
26. 26) T. Shintani, Y. Murata, Y. Terada and M. Morinaga: J. Japan Inst. Metals 74 (2010) 806–810.10.2320/jinstmet.74.806 ↗
27. 27) The Japan Institute of Metals and Materials: Kinzoku data book, 4, (Maruzen, Tokyo, 2004) p. 40.
28. 28) I.C. Dragomir, D.S. Li, G.A. Castello-Branco, H. Garmestani, R.L. Snyder, G. Ribárik and T. Ungár: Mater. Charact. 55 (2005) 66–74.10.1016/j.matchar.2005.03.002 ↗
29. 29) I.C. Dragomir and T. Ungár: J. Appl. Cryst. 35 (2002) 556–564.10.1107/S0021889802009536 ↗
30. 30) I.P. Jones and W.B. Hutchinson: Acta Metall. 29 (1981) 951–968.10.1016/0001-6160(81)90049-3 ↗
31. 31) I. Gokyu, T. Okubo, T. Tanabe and K. Kitanaka: J. Japan Inst. Metals 36 (1972) 972–977.10.2320/jinstmet1952.36.10_972 ↗
32. 32) N. Nagata, S. Yoshida and Y. Sekino: J. Japan Inst. Metals 33 (1969) 271–277.10.2320/jinstmet1952.33.2_271 ↗
33. 33) D. Rodríguez-Galán, I. Sabirov and J. Segurado: Int. J. Plast. 70 (2015) 191–205.10.1016/j.ijplas.2015.04.002 ↗
34. 34) A. Akhtar: Metall. Mater. Trans. A 6 (1975) 1105–1113.10.1007/BF02645537 ↗
35. 35) M. Kato: Nyumon teniron, (SHOKABO, Tokyo, 2010) pp. 105–111.
36. 36) M. Koyama, T. Sawaguchi and K. Tsuzaki: Tetsu-to-Hagané 100 (2014) 1246–1252.10.2355/tetsutohagane.100.1246 ↗